X96max bad flash, no u-boot, SYS1 pll lock check retry, Stop here...

[derbg]

Hello,

i have a big problem after a bad flash.
I?ve tried to flash a new FW and it bricked.

Amlogic Burning Tool does not recognize it.
Amlogic sd recovery does?nt work
Reset button in the av port no function.

Shorting the NAND dont work https://forum.freaktab.com/forum/mai...755#post758755

I have a serial connection to the box and this is the only response:

G12A:BL:0253b8:61aa2d;FEAT:E0F83180:2000;POC:F;RCY:0;EMMC:0;READ:0;0.0
                                                                      l2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0001 - pwm id 0x00
bl2_stage_init 0xc0
bl2_stage_init 0x02

L0:00000000
L1:00000703
L2:00008067
L3:04000000
B2:00002000
B1:e0f83180

TE: 217253

BL2 Built : 19:22:38, Jun 28 2019. g12b ga659aac-dirty - zhiguang.ouyang@droid04-sz

Board ID = 1
Set A53 clk to 24M
Set A73 clk to 24M
Set clk81 to 24M
SYS1 pll lock check retry
try t0...
SYS1 pll lock check retry
try t1...
SYS1 pll lock check retry
Stop here...

Do anyone see hope or is the box dead?

Thanks in advance
derBG

[danshui]

My x96max 4/64 also became bricks. I opened the short-circuit circuit of the box and flashed the x96max original firmware back, but I have been testing for short-touch. I only know that two of the contacts are correct. I'm not sure which two, if you still need it, I will send you pictures and flashing methods. The text is translated from Google into English by Google, I hope you can understand, please understand that I do not speak English