Beelink GT King dead

[Ajvan]

My device died. It just lights up the green skull, and nothing is going on...
Purchased it 20 days ago...

[trebor]

Green is good could faulty HDMI cable or input to TV
Its not dead if it lights up

[Ajvan]

I have tried different hdmi cable, and change port on TV.
The skull is lightning green. The remote is working. I have tried reinstalling firmware. And still nothing. No picture.

[clarkss12]

I have tried different hdmi cable, and change port on TV.
The skull is lightning green. The remote is working. I have tried reinstalling firmware. And still nothing. No picture.

If it is a 4k TV, you may want to try on a NON-4k TV. I had that issue on one of my other boxes, it would NOT display on my 4k TV, had to set it up on a 1080p TV.

And, you could also, give CoreELEC a try as a last resort. All you need is a microSD card or pen drive, and a computer to burn the CoreELEC OS to the microSD card.

[Ajvan]

If it is a 4k TV, you may want to try on a NON-4k TV. I had that issue on one of my other boxes, it would NOT display on my 4k TV, had to set it up on a 1080p TV.

And, you could also, give CoreELEC a try as a last resort. All you need is a microSD card or pen drive, and a computer to burn the CoreELEC OS to the microSD card.

It is 4k TV and it was working fine. I dont have another TV.
Dont have a pc either.

[Ajvan]

I mean cant insert sd card to pc

[clarkss12]

I mean cant insert sd card to pc

The operating system will be on your microSD card. You have to use a computer running Rufus to create the OS, so you need a sd card reader attached to your computer. You download and install Rufus. Go the CoreELEC website and download the nightly ( https://relkai.coreelec.org/ ) for for your box. Get the one with this name. "CoreELEC-Amlogic-ng.arm-9.1-nightly_20190831-Generic.img.gz".

Once you have the OS installed on your sd card, put the card into your "King". There is a reset hole on the bottom of your "King", depress and hold it for about 15 seconds after you plug in the power to your "King". It should boot into coreELEC. It does NOT touch your Android you already have installed. That will tell you if your box is still functionable.

[Ajvan]

The operating system will be on your microSD card. You have to use a computer running Rufus to create the OS, so you need a sd card reader attached to your computer. You download and install Rufus. Go the CoreELEC website and download the nightly ( https://relkai.coreelec.org/ ) for for your box. Get the one with this name. "CoreELEC-Amlogic-ng.arm-9.1-nightly_20190831-Generic.img.gz".

Once you have the OS installed on your sd card, put the card into your "King". There is a reset hole on the bottom of your "King", depress and hold it for about 15 seconds after you plug in the power to your "King". It should boot into coreELEC. It does NOT touch your Android you already have installed. That will tell you if your box is still functionable.

I don't have card reader. Any other way?

[Silver]

Did you try different power supply first?

they ship bad power supply with the box

[Ajvan]

Did you try different power supply first?

they ship bad power supply with the box

No, I have not. It gets power since green skull is lightning
..

[clarkss12]

I don't have any other suggestions.............

[trebor]

yep get in touch with the re-seller and do a warranty claim.

[Silver]

No, I have not. It gets power since green skull is lightning
..

No that does not matter, try to use different power supply.

[Ajvan]

So the best android box comes with crap power supply. Where should i get and give me specs please...
I need EU plug

[Ajvan]

The thing i forgot to mention is that i can use remote to turn off the device and turn it back on