Bricked S905W

[vladakru]

Hi.
i have this mesage from uart
GXL:BL1:9ac50e:bb16dc;FEAT:BDFC31BC:0;POC:3;RCY:0; EMMC:0;READ:0;CHK:A7;READ:0;CHK:A7;READ:0;CHK:A7;S D:800;USB:8;
LOOP:1;EMMC:0;READ:0;CHK:A7;READ:0;CHK:A7;READ:0;C HK:A7;SD:800;USB:8;
LOOP:2;EMMC:0;READ:0;CHK:A7;READ:0;CHK:A7;READ:0;C HK:A7;SD:800;USB:8;
LOOP:3.........

i see that is BL1 - This is the Boot Loader stage 1 is not on the eMMC.

i can't boot from sd card at all
i have problem with this

Step 2:

Windows
Use Amlogic Bootcard Maker to write aml_sdc_burn.UBOOT to the sdcard.

Bootcard Maker only worl with .bin files extension...
i make boot sd card with Burn Card maker and various roms...
I had no success

still same message from uart and no signal from HDMI..

What do you recommend

[smilenkovski]

There is solution using usb burning tool. I've had wetek play 2 bricked (same processor, same output) , Search on youtube for wetek play 2 recovery and you'll find files.

[vladakru]

There is solution using usb burning tool. I've had wetek play 2 bricked (same processor, same output) , Search on youtube for wetek play 2 recovery and you'll find files.

it doesn't work at all, i tried to copy aml_autoscript on the micro sd card, DB-J648-wetek-ota-2015-07-15_12-47-40.zip, factory_update_param.aml, recovery.img, with the button hold the button on to turn on the power. but nothing really happens.
I tried the usb burning tool with "WeTek2_mac_v2.0.1_usid_in_by_belaid.img" I click on start and then unplug the usb cables while holding the button but it throws me an error [2019-11-16 12:51:15 868] [HUB6-3] [0x10103005] Romcode / Initialize DDR / Download buffer / Read item data failed.

I don't know what to do anymore ...
what exactly did you do to revive your box?????

[smilenkovski]

Be patient and strictly follow the procedure. Unplug everything. Only usb cable male to male. Run usb burning toool. load firmware  into software. Connnect usb cable . Windows will make sound (new device sound), click start. I had an identical  output and now I have ubuntu running on the device now. Check if you downloaded properly files, if it is necessary I will send you mine .

[vladakru]

Be patient and strictly follow the procedure. Unplug everything. Only usb cable male to male. Run usb burning toool. load firmware? into software. Connnect usb cable . Windows will make sound (new device sound), click start. I had an identical? output and now I have ubuntu running on the device now. Check if you downloaded properly files, if it is necessary I will send you mine .

Send me link to your file please.

[gefattern]

Send me link to your file please.

Hi ,

think you must do this with the Files of your Stockrom , not from others , different PCBs ,

are you sure it must be the .zip File , for the Firmware , not a.img , like all others ,

https://chinagadgetsreviews.com/how-to-unbrick-any-amlogic-devices-create-an-bootable-magic-micro-sd-card-in-minutes.html

good luck / gefattern