Beenlink GT King Pro - H: 134.99 100 units GEARBEST

[gearbest]

Beelink GT-King Pro Hi-Fi Lossless Sound 4K TV Box With Dolby Audio DTS
Amlogic S922X-H 4GB RAM 64GB ROM Android 9.0 Voice Remote Control
Slate Blue 4GB DDR4+64GB EMMC

Coupon : GBCNGTKINGPRO 134.99 100 PCS



https://www.gearbest.com/tv-box/pp_0...&lkid=65324858

[mo123]

gearbest

Please correct the description of the device on your store.

According to Beelink they lowered the CPU speed from 2.21 to 1.7Ghz since it was running unstable.
Please check with them since lots of users purchased the device from you and only get 1.7Ghz speed now, not 2.21Ghz which is almost 500mhz advertised higher which is misleading.

The correct speed of the CPU's are like this:
This tv box is based on the Amlogic S922X, which is a 12nm six-core chip featuring Quad-core ARM Cortex-A73 that can reach 1.7 GHz and Dual-core ARM Cortex-A53 that can reach 1.8 GHz.

Maybe there are still old stock of 2.21Ghz, just make sure.

From Beelink:
"Hi,
Thank you for your letter. In order to improve the stability of the system, we have done a down-clocking process on this CPU.
Best regards"

[Beelink]

gearbest

Please correct the description of the device on your store.

According to Beelink they lowered the CPU speed from 2.21 to 1.7Ghz since it was running unstable.
Please check with them since lots of users purchased the device from you and only get 1.7Ghz speed now, not 2.21Ghz which is almost 500mhz advertised higher which is misleading.

The correct speed of the CPU's are like this:
This tv box is based on the Amlogic S922X, which is a 12nm six-core chip featuring Quad-core ARM Cortex-A73 that can reach 1.7 GHz and Dual-core ARM Cortex-A53 that can reach 1.8 GHz.

Maybe there are still old stock of 2.21Ghz, just make sure.

From Beelink:
"Hi,
Thank you for your letter. In order to improve the stability of the system, we have done a down-clocking process on this CPU.
Best regards"

Thank you for being able to raise the shortcomings of our products。
The default frequency of the S922X is 1.8Ghz, and the overclocking can reach 2.2Ghz. However, because Amlogic claims that the S922X overclocking reaches 2.2Ghz, the product will be unstable, and the chip will overheat. Some problems occur during use, and 1.8Ghz is stable. The best frequency of operation, in order to maintain the stability of the product, we began to set the default frequency of the S922X product to 1.8Ghz.
If the customer wants, we can restore the firmware running at the highest frequency of 2.2Ghz, but this may make the product unstable.