Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

AMLOGIC A95X-A2 need help flasing or firmware for unit

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    AMLOGIC A95X-A2 need help flasing or firmware for unit

    THIS Amlogic tv box is a a95x-A2 has ANDROID 6.0 PROCESSOR of S912and cpu of cortex a53.been tying to flash it with usb burning tool v2.0.8 keep getting error at 96 percent.this is the read out i get what is causing this problem.thanks for the help or if any body has another firmware for this unit maybe mine is corrupted.Ihave also been able to reboot into recovery mode and did a factory reset but it stops and says e:cannot load volume

    [11:03:19 731][Global][War]--User click stop button
    [11:03:19 731][Global][Inf]--Enable burning 0
    [11:03:20 824][Global][Inf]--User click refresh button
    [11:03:22 028][Global][Inf]--User click start button
    [11:03:22 028][Global][Inf]--SetErase
    [11:03:22 028][Global][Inf]--Enable burning 1
    [11:03:22 028][Global][Inf]--Scan usb device
    [11:03:22 028][Global][Inf]--Aml scan WorldCup Device
    [11:03:22 028][Global][Inf]--Host: Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34
    [11:03:22 028][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_3b34&subsys_040a1028& rev_05#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [11:03:22 028][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&21999a3e&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [11:03:22 028][Global][Inf]-------->[Port0]USB#VID_8087&PID_0020#5&1beb185b&1&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [11:03:22 028][Global][Inf]---------->[Port0]NoDeviceConnected
    [11:03:22 028][Global][Inf]---------->[Port1]NoDeviceConnected
    [11:03:22 028][Global][Inf]---------->[Port2]Other device
    [11:03:22 028][Global][Inf]---------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&14dd810&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [11:03:22 028][Global][Inf]---------->[Port4]NoDeviceConnected
    [11:03:22 028][Global][Inf]---------->[Port5]NoDeviceConnected
    [11:03:22 028][Global][Inf]---------->[Port6]Other device
    [11:03:22 028][Global][Inf]---------->[Port7]Other device
    [11:03:22 028][Global][Inf]-------->[Port1]NoDeviceConnected
    [11:03:22 028][Global][Inf]-------->[Port2]NoDeviceConnected
    [11:03:22 028][Global][Inf]--Host: Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C
    [11:03:22 028][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_3b3c&subsys_040a1028& rev_05#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [11:03:22 028][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&8798bdb&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [11:03:22 028][Global][Inf]-------->[Port0]USB#VID_8087&PID_0020#5&1302eca6&1&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [11:03:22 028][Global][Inf]---------->[Port0]USB#VID_413C&PID_2513#6&38279694&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [11:03:22 043][Global][Inf]--Burning thread HUB2-4 start
    [11:03:22 072][Global][Inf]------------>[Port0]NoDeviceConnected
    [11:03:22 072][Global][Inf]------------>[Port1]NoDeviceConnected
    [11:03:22 072][Global][Inf]------------>[Port2]NoDeviceConnected
    [11:03:22 072][Global][Inf]---------->[Port1]USB#VID_413C&PID_2513#6&38279694&0&2#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [11:03:22 104][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&14dd810&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000004fc
    [11:03:22 109][Global][Inf]------------>[Port0]NoDeviceConnected
    [11:03:22 109][Global][Inf]------------>[Port1]NoDeviceConnected
    [11:03:22 109][Global][Inf]------------>[Port2]NoDeviceConnected
    [11:03:22 109][Global][Inf]---------->[Port2]NoDeviceConnected
    [11:03:22 109][Global][Inf]---------->[Port3]Other device
    [11:03:22 109][Global][Inf]---------->[Port4]NoDeviceConnected
    [11:03:22 109][Global][Inf]---------->[Port5]NoDeviceConnected
    [11:03:22 109][Global][Inf]-------->[Port1]NoDeviceConnected
    [11:03:22 109][Global][Inf]-------->[Port2]NoDeviceConnected
    [11:03:22 109][Global][Inf]--Scan USB host controller complete
    [11:03:22 109][Global][Inf]--Update data center with HubMap
    [11:03:22 109][Global][Inf]--Update hub2 device data
    [11:03:22 109][Global][Inf]--Update HUB2-1
    [11:03:22 109][HUB2-1][Inf]--Update device path
    [11:03:22 109][Global][Inf]--Update HUB2-2
    [11:03:22 109][HUB2-2][Inf]--Update device path
    [11:03:22 109][Global][Inf]--Update HUB2-3
    [11:03:22 109][HUB2-3][Inf]--Update device path
    [11:03:22 109][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#6&14dd810&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [11:03:22 156][HUB2-4][Inf]--Update device path
    [11:03:22 156][HUB2-4][Inf]--Connect path=Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34/P0/P0/P3
    [11:03:22 156][HUB2-4][Inf]--Start burning...
    [11:03:22 156][Global][Inf]--Update HUB2-5
    [11:03:22 156][HUB2-5][Inf]--Update device path
    [11:03:22 156][Global][Inf]--Update HUB2-6
    [11:03:22 156][HUB2-6][Inf]--Update device path
    [11:03:22 156][Global][Inf]--Update HUB2-7
    [11:03:22 156][HUB2-7][Inf]--Update device path
    [11:03:22 156][Global][Inf]--Update HUB2-8
    [11:03:22 156][HUB2-8][Inf]--Update device path
    [11:03:22 218][HUB2-4][Inf]--------------ERASE BOOTLOADER------------
    [11:03:22 218][HUB2-4][Inf]--0-7-0-16
    [11:03:22 218][HUB2-4][Inf]--Identify status success
    [11:03:22 218][HUB2-4][Inf]-- low_power
    [11:03:22 225][HUB2-4][Inf]--Low power command success
    [11:03:22 227][HUB2-4][Inf]--Read low power success
    [11:03:22 227][HUB2-4][Inf]--bootloader_is_old
    [11:03:22 227][HUB2-4][Inf]--Bootloader command success
    [11:03:22 227][HUB2-4][Err]--failed: bootloader is new
    [11:03:22 227][HUB2-4][Inf]--Bootloader is new
    [11:03:22 227][HUB2-4][Inf]-------------Download DDR.USB-----------
    [11:03:22 227][HUB2-4][Inf]--Close device handle 0x000004fc
    [11:03:22 291][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&14dd810&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000004fc
    [11:03:22 353][HUB2-4][Inf]--0-7-0-16
    [11:03:22 353][HUB2-4][Inf]--No need download
    [11:03:22 353][HUB2-4][Inf]-------------Download UBOOT.USB-----------
    [11:03:22 353][HUB2-4][Inf]--0-7-0-16
    [11:03:22 353][HUB2-4][Inf]--No need download
    [11:03:22 353][HUB2-4][Inf]-- low_power
    [11:03:22 353][HUB2-4][Inf]--Send command success
    [11:03:22 353][HUB2-4][Inf]--Read command status success
    [11:03:22 353][HUB2-4][Inf]-------------Download meson1.dtb-----------
    [11:03:22 353][HUB2-4][Inf]--0-7-0-16
    [11:03:22 353][HUB2-4][Inf]-- download mem dtb normal 131072
    [11:03:22 353][HUB2-4][Inf]--Send download command success
    [11:03:22 369][HUB2-4][Inf]--Read command status success
    [11:03:22 385][HUB2-4][Inf]--Transfer complete
    [11:03:22 385][HUB2-4][Inf]--Send download get_status command succeed
    [11:03:22 400][HUB2-4][Inf]--get_status success
    [11:03:22 916][HUB2-4][Inf]-------------ERASE FLASH-----------
    [11:03:22 916][HUB2-4][Inf]--disk_initial 1
    [11:03:22 916][HUB2-4][Inf]--Send command success
    [11:03:22 916][HUB2-4][Inf]--Read command status success
    [11:03:22 916][HUB2-4][Inf]-------------Download boot.PARTITION-----------
    [11:03:22 916][HUB2-4][Inf]--0-7-0-16
    [11:03:22 916][HUB2-4][Inf]--download store boot normal 8163328
    [11:03:22 916][HUB2-4][Inf]--Send download command success
    [11:03:22 932][HUB2-4][Inf]--Read command status success
    [11:03:23 713][HUB2-4][Inf]--Transfer complete
    [11:03:23 713][HUB2-4][Inf]--Send download get_status command succeed
    [11:03:23 728][HUB2-4][Inf]--get_status success
    [11:03:23 728][HUB2-4][Inf]--verify sha1sum 3a6deeb1a4637dab5054e94a274e549cebb33db8
    [11:03:23 728][HUB2-4][Inf]--Send verify cmd succeed
    [11:03:24 103][HUB2-4][Inf]--Get verify status success
    [11:03:24 619][HUB2-4][Inf]-------------Download logo.PARTITION-----------
    [11:03:24 619][HUB2-4][Inf]--0-7-0-16
    [11:03:24 619][HUB2-4][Inf]--download store logo normal 961264
    [11:03:24 619][HUB2-4][Inf]--Send download command success
    [11:03:24 635][HUB2-4][Inf]--Read command status success
    [11:03:24 728][HUB2-4][Inf]--Transfer complete
    [11:03:24 728][HUB2-4][Inf]--Send download get_status command succeed
    [11:03:24 728][HUB2-4][Inf]--get_status success
    [11:03:24 728][HUB2-4][Inf]--verify sha1sum 9e10c052b2d73361d3d19ba0db989dd8aedf7f93
    [11:03:24 728][HUB2-4][Inf]--Send verify cmd succeed
    [11:03:24 791][HUB2-4][Inf]--Get verify status success
    [11:03:25 307][HUB2-4][Inf]-------------Download recovery.PARTITION-----------
    [11:03:25 307][HUB2-4][Inf]--0-7-0-16
    [11:03:25 307][HUB2-4][Inf]--download store recovery normal 11094016
    [11:03:25 307][HUB2-4][Inf]--Send download command success
    [11:03:25 322][HUB2-4][Inf]--Read command status success
    [11:03:26 369][HUB2-4][Inf]--Transfer complete
    [11:03:26 369][HUB2-4][Inf]--Send download get_status command succeed
    [11:03:26 385][HUB2-4][Inf]--get_status success
    [11:03:26 385][HUB2-4][Inf]--verify sha1sum 27403e91fbd3e957faa791f62a843d795979aae1
    [11:03:26 385][HUB2-4][Inf]--Send verify cmd succeed
    [11:03:26 900][HUB2-4][Inf]--Get verify status success
    [11:03:27 494][HUB2-4][Inf]-------------Download system.PARTITION-----------
    [11:03:27 510][HUB2-4][Inf]--0-7-0-16
    [11:03:27 510][HUB2-4][Inf]--download store system sparse 750254804
    [11:03:27 510][HUB2-4][Inf]--Send download command success
    [11:03:27 525][HUB2-4][Inf]--Read command status success
    [11:04:40 465][HUB2-4][Inf]--Transfer complete
    [11:04:40 465][HUB2-4][Inf]--Send download get_status command succeed
    [11:04:40 469][HUB2-4][Inf]--get_status success
    [11:04:40 469][HUB2-4][Inf]--verify sha1sum 7c4fbd4cfd26e4b09b1794a7c308bd561cf93271
    [11:04:40 470][HUB2-4][Inf]--Send verify cmd succeed
    [11:05:14 317][HUB2-4][Err]--failed:Verify Failed with sha1sum, origin sum "7c4fbd4cfd26e4b09b1794a7c308bd561cf93271" != gen sum "8d396f0cb521f4d26df12b78c33b66fd2710422f"

    [11:05:14 417][HUB2-4][Err]--[0x30405004]UBOOT/Partition system/Verify patition/Error result
    [11:05:14 417][HUB2-4][Inf]--Close device handle 0x000004fc
    Last edited by danhulk; 19 December 2019, 01:19.
    Tags: None
    #2
    so nobody can help me with this tv box

    Comment

    Previous template Next

    What's Going On

    Collapse

    There are currently 2390 users online. 2 members and 2388 guests.

    Most users ever online was 63,956 at 18:56 on 20 March 2025.

    Working...
    X

    We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

    By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

    I Agree