Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

ATV9-MOD-(P212)AMPERE-V3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • freakbox
    replied
    Originally posted by alex161rus View Post
    this is QCA9377
    Okey, but how to fix it?

    Leave a comment:


  • alex161rus
    replied
    Originally posted by freakbox View Post
    FN-Link 8223A-SR
    this is QCA9377

    Leave a comment:


  • freakbox
    replied
    Originally posted by bumerc View Post
    dsm150 freakbox

    made an update, AP6330 fix, led fix, please test
    I don't have an AP6330, Can you fix my FN-Link bluetooth please? I really like these rom

    Leave a comment:


  • freakbox
    replied
    Originally posted by firmtech View Post
    Tried to flash this ROM. Device is hard bricked. Can't get USB Burning tool to connect. Any advise? Thanks.
    You must short pins on emmc chip, then connect cable.

    Leave a comment:


  • dsm150
    replied
    Originally posted by firmtech View Post
    Tried to flash this ROM. Device is hard bricked. Can't get USB Burning tool to connect. Any advise? Thanks.
    Which device you’ve try flash this ROM?

    Leave a comment:


  • dsm150
    replied
    Originally posted by bumerc View Post
    dsm150 freakbox

    made an update, AP6330 fix, led fix, please test
    wifi not working
    now, second USB is working, but first (firmware upload) USB not working.
    bluetooth is working

    127|:/vendor/etc/dropbear # dmesg | grep wifi
    [ 0.000000] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=1 reboot_mode_android=normal androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz frac_rate_policy=1 cvbsmode=576cvbs hdmitx=,444,8bit cvbsdrv=0 irq_check_en=0 androidboot.firstboot=0 jtag=apao androidboot.veritymode=enforcing androidboot.hardware=amlogic page_trace=on androidboot.rpmb_state=0 androidboot.serialno=1234567890 androidboot.wificountrycode=US ro rootwait skip_initramfs androidboot.dtbo_idx=0 vmalloc=512m --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
    [ 1.552076] wifi: power_on_pin_OD = 0;
    [ 1.554524] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
    [ 1.560377] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
    [ 1.567066] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
    [ 1.573723] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
    [ 1.593916] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=487
    [ 1.599855] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
    [ 1.606892] aml_wifi wifi: [wifi_dev_probe] power_on_pin=486
    [ 1.612716] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
    [ 1.618756] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
    [ 1.624189] aml_wifi wifi: [wifi_setup_dt] irq num is69)
    [ 1.629704] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(487)
    [ 1.635667] aml_wifi wifi: [wifi_setup_dt] power_on_pin(486)
    [ 10.171880] dhd_wifi_platform_load: Enter
    [ 10.180890] wifi_platform_set_power = 1
    [ 10.190973] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
    [ 10.399275] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
    [ 10.912777] wifi_platform_bus_enumerate device present 1
    [ 11.420993] wifi_platform_set_power = 0
    [ 21.956915] wl_android_wifi_on in 1
    [ 21.960416] wl_android_wifi_on in 2: g_wifi_on=0
    [ 21.965318] wifi_platform_set_power = 1
    [ 21.974667] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
    [ 22.236778] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
    [ 23.125926] dhd_conf_read_config: Ignore config file /vendor/etc/wifi/buildin/config.txt
    [ 23.129417] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
    [ 23.136369] Final nv_path=/vendor/etc/wifi/buildin/
    [ 23.143606] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
    [ 23.146397] Final conf_path=/vendor/etc/wifi/buildin/config.txt
    [ 23.160303] dhd_os_open_image1: /vendor/etc/wifi/buildin/fw_bcm40183b2.bin (239507 bytes) open success
    [ 23.344644] dhd_os_open_image1: /vendor/etc/wifi/buildin/ is not regular file
    [ 23.346445] dhdsdio_download_nvram: Open nvram file failed /vendor/etc/wifi/buildin/
    [ 23.383551] wifi_platform_set_power = 0
    [ 23.392111] wl_android_wifi_on: Failed
    [ 23.396947] dhd_open : wl_android_wifi_on failed (-35)
    [ 23.408162] wl_android_wifi_off in 1
    [ 23.411934] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
    [ 23.427960] wifi_platform_set_power = 0
    [ 23.439444] wl_android_wifi_off out
    [ 33.239478] wl_android_wifi_on in 1
    [ 33.242799] wl_android_wifi_on in 2: g_wifi_on=0
    [ 33.247770] wifi_platform_set_power = 1
    [ 33.256782] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
    [ 33.491978] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
    [ 34.289196] dhd_conf_read_config: Ignore config file /vendor/etc/wifi/buildin/config.txt
    [ 34.291826] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
    [ 34.308515] Final nv_path=/vendor/etc/wifi/buildin/
    [ 34.308649] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
    [ 34.321258] Final conf_path=/vendor/etc/wifi/buildin/config.txt
    [ 34.326109] dhd_os_open_image1: /vendor/etc/wifi/buildin/fw_bcm40183b2.bin (239507 bytes) open success
    [ 34.460366] dhd_os_open_image1: /vendor/etc/wifi/buildin/ is not regular file
    [ 34.462118] dhdsdio_download_nvram: Open nvram file failed /vendor/etc/wifi/buildin/
    [ 34.523273] wifi_platform_set_power = 0
    [ 34.533060] wl_android_wifi_on: Failed
    [ 34.541078] dhd_open : wl_android_wifi_on failed (-35)
    [ 34.550491] wl_android_wifi_off in 1
    [ 34.552339] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
    [ 34.570194] wifi_platform_set_power = 0
    [ 34.579200] wl_android_wifi_off out
    [ 177.787796] wl_android_wifi_on in 1
    [ 177.788001] wl_android_wifi_on in 2: g_wifi_on=0
    [ 177.793166] wifi_platform_set_power = 1
    [ 177.803106] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
    [ 178.030114] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
    [ 178.756515] dhd_conf_read_config: Ignore config file /vendor/etc/wifi/buildin/config.txt
    [ 178.761565] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
    [ 178.761568] Final nv_path=/vendor/etc/wifi/buildin/
    [ 178.761570] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
    [ 178.761572] Final conf_path=/vendor/etc/wifi/buildin/config.txt
    [ 178.773261] dhd_os_open_image1: /vendor/etc/wifi/buildin/fw_bcm40183b2.bin (239507 bytes) open success
    [ 178.946135] dhd_os_open_image1: /vendor/etc/wifi/buildin/ is not regular file
    [ 178.947872] dhdsdio_download_nvram: Open nvram file failed /vendor/etc/wifi/buildin/
    [ 178.984487] wifi_platform_set_power = 0
    [ 178.993335] wl_android_wifi_on: Failed
    [ 178.997335] dhd_open : wl_android_wifi_on failed (-35)
    [ 179.009722] wl_android_wifi_off in 1
    [ 179.013434] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
    [ 179.029424] wifi_platform_set_power = 0
    [ 179.038570] wl_android_wifi_off out
    [ 248.215458] wl_android_wifi_on in 1
    [ 248.229410] wl_android_wifi_on in 2: g_wifi_on=0
    [ 248.229512] wifi_platform_set_power = 1
    [ 248.237848] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
    [ 248.603620] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
    [ 249.264871] dhd_conf_read_config: Ignore config file /vendor/etc/wifi/buildin/config.txt
    [ 249.272398] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
    [ 249.278821] Final nv_path=/vendor/etc/wifi/buildin/
    [ 249.283830] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
    [ 249.289596] Final conf_path=/vendor/etc/wifi/buildin/config.txt
    [ 249.297011] dhd_os_open_image1: /vendor/etc/wifi/buildin/fw_bcm40183b2.bin (239507 bytes) open success
    [ 249.355032] dhd_os_open_image1: /vendor/etc/wifi/buildin/ is not regular file
    [ 249.356794] dhdsdio_download_nvram: Open nvram file failed /vendor/etc/wifi/buildin/
    [ 249.393474] wifi_platform_set_power = 0
    [ 249.402391] wl_android_wifi_on: Failed
    [ 249.406191] dhd_open : wl_android_wifi_on failed (-35)
    [ 249.418595] wl_android_wifi_off in 1
    [ 249.422318] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
    [ 249.438210] wifi_platform_set_power = 0
    [ 249.447273] wl_android_wifi_off out
    [ 254.404525] wl_android_wifi_on in 1
    [ 254.413091] wl_android_wifi_on in 2: g_wifi_on=0
    [ 254.413151] wifi_platform_set_power = 1
    [ 254.423994] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
    [ 254.688182] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
    [ 255.397028] dhd_conf_read_config: Ignore config file /vendor/etc/wifi/buildin/config.txt
    [ 255.399715] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
    [ 255.411161] Final nv_path=/vendor/etc/wifi/buildin/
    [ 255.411204] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
    [ 255.417134] Final conf_path=/vendor/etc/wifi/buildin/config.txt
    [ 255.424798] dhd_os_open_image1: /vendor/etc/wifi/buildin/fw_bcm40183b2.bin (239507 bytes) open success
    [ 255.517096] dhd_os_open_image1: /vendor/etc/wifi/buildin/ is not regular file
    [ 255.518769] dhdsdio_download_nvram: Open nvram file failed /vendor/etc/wifi/buildin/
    [ 255.555720] wifi_platform_set_power = 0
    [ 255.564297] wl_android_wifi_on: Failed
    [ 255.568270] dhd_open : wl_android_wifi_on failed (-35)
    [ 255.580610] wl_android_wifi_off in 1
    [ 255.584388] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
    [ 255.600424] wifi_platform_set_power = 0
    [ 255.609318] wl_android_wifi_off out
    :/vendor/etc/dropbear # dmesg | grep chip
    [ 0.229275] Meson chip version = RevB (21:B - 82:0)
    [ 1.114260] hdmitx: system: hdmitx_device.chip_type : 3
    [ 1.311177] chip type:0x21
    [ 8.557680] The chip is not support hevc encoder
    [ 11.167147] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
    [ 11.182077] dhd_conf_set_chiprev: chip=0x4330, chiprev=4
    [ 23.107737] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
    [ 34.256672] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
    [ 178.744499] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
    [ 249.254952] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
    [ 255.368989] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
    :/vendor/etc/dropbear # ^C

    Leave a comment:


  • firmtech
    replied
    Tried to flash this ROM. Device is hard bricked. Can't get USB Burning tool to connect. Any advise? Thanks.

    Leave a comment:


  • bumerc
    replied
    dsm150 freakbox

    made an update, AP6330 fix, led fix, please test

    Leave a comment:


  • freakbox
    replied
    Remote is Working great, thanks, but bluetooth not :/ But Thank you very much.

    Edit: But if you have some idea or files i will try it, no problem.
    Last edited by freakbox; 22 April 2020, 19:18.

    Leave a comment:


  • alex161rus
    replied
    Originally posted by freakbox View Post
    you can repair that bluetooth too?
    replace all files from the archive. I do not know. will work or not. at one's own risk.
    rtl_bt_vendor.zip

    changed remote code
    remote_4040.zip
    Attached Files

    Leave a comment:


  • freakbox
    replied
    Originally posted by alex161rus View Post

    I will fix it later .. now busy
    Okey, thank you so much, i can ask you, you can repair that bluetooth too? Thank you too much.

    Leave a comment:


  • alex161rus
    replied
    Originally posted by freakbox View Post

    Thanks you too much, my remote works, but volume up and down wont work, can you help me please?
    I will fix it later .. now busy

    Leave a comment:


  • freakbox
    replied
    Originally posted by alex161rus View Post

    replace
    Thanks you too much, my remote works, but volume up and down wont work, can you help me please?

    Leave a comment:


  • alex161rus
    replied
    Originally posted by freakbox View Post

    I uploaded you all remote.tab and remote.conf and remote.cfg

    thank you for helping me.
    replace
    Attached Files

    Leave a comment:


  • freakbox
    replied
    Originally posted by bumerc View Post
    I'm checking usb and led tonight.
    remote.cfg, remote.conf does not know the *.rc script
    Thanks, can you do smthing with bluetooth too please? thanks.

    Leave a comment:

Working...
X