ATV9-MOD-(P212)AMPERE-V3

...remote does not work, and also I cannot replace the remote file because I cannot log in...]

Instead, use a computer mouse to complete the installation ...

[Leiden]

hi
I installed ATV9-img- debug-ampere AP6330-v3 on my device T6 s905x and it was successfully completed, but the problem when operating the device works well but asks to choose the language and choose the language but when I press the OK button it does not work until I continue to the next steps, unfortunately I could not Do this because the remote does not work, and also I cannot replace the remote file because I cannot log in. Please help.

[RiCkLaR_atvX]

For those that know how, setting the CPU minimum frequency at 500 or 600 mhz seems to really improve this firmware which is already very stellar and I don't feel a need to change much of anything.

[bumerc]

Hi, i can flash it on my tanix tx3 mini 2018 ok?
and i need replace the remote.conf?

hi, no, only s905x devices

[herbert_15]

New updates are now available in the first post..!

Hi, i can flash it on my tanix tx3 mini 2018 ok?
and i need replace the remote.conf?

[freakbox]

My Box too

[bullghost]

bullghost
Your device is currently not supported, read the first post (SpecTek MLC Nand), I could build an extra build for this type of memory, but I won't start without a test device because the bootloader has to be reconfigured

Hi bumerc , you can use my box to do the test

[bumerc]

bullghost
Your device is currently not supported, read the first post (SpecTek MLC Nand), I could build an extra build for this type of memory, but I won't start without a test device because the bootloader has to be reconfigured

[bullghost]

@bumerc ,hi i read this thread and its very exciting ,
i like to try ,just want make sure is my box (M8S Pro + with 2G ram 16G storage) support ?

here i share my remote , dtb and boot image,

the boot image
https://mega.nz/file/sJohTAoQ#dIDM5k...28ltM_qj2053gQ


i have trouble , i cannot download the ATV9-IMG-DEBUG-AMPERE-V3 img its google drive download always fail in half way, can please share it in mega ?
thanks in advance

[bumerc]

1. only Ampak and Realtek WiFi chipsets are supported.
2. Use the original remote.conf file

[loaded2107]

Great work! Nice and smooth. Thanks for sharing.

I have managed to flash V3 to my old Mecool M8S Pro+ 2/16GB
WiFi appears to be 9082xs chip and does not work. Tried available patches.
One USB port is functioning.
Remote control is not working.


Happy to test any new builds and report back.

[bumerc]

firmtech
I tested your remote.tab config on my X96Mini test device, all the buttons worked perfectly You need to find out the correct factory_code for your remote control..

[firmtech]

Yes.

Thanks! I will try.

[sagert]

The TX5 ROM on daivietpda?

Yes.

[sagert]

The TX5 ROM on daivietpda?

https://daivietpda.com/2020/03/rom-atv9-v6-cho-tx5-tx5-limited-tx5-pro/