ATV9-MOD-(P212)AMPERE-V3

[dsm150]

Ok, one more issue.
on this rom, only one usb port works through which the firmware is uploaded. through the Second port, no one device works like a keyboard, mouse, remote usb dongle etc.

nexbox a95x s905x chip

[superceleron]

For information:
After installing the firmware, but before updating the applications in the play store:

That is because google just updated their ATV assist app, and that new one has some issue with custom atv roms.

[dsm150]

ok, i will check this later

For information:
After installing the firmware, but before updating the applications in the play store:





??????After updating from the play store:

[bumerc]

ok, i will check this later

[dsm150]

fw_bcm40183b2.bin is missing, I will look for this FW and install it in the next update (thanks for the logs). I can't say anything about the Android TV app, I've never used it

So take a look at the photo, search settings in applications, in the firmware itself do not work. The problem here is not in the remote control.

[bumerc]

fw_bcm40183b2.bin is missing, I will look for this FW and install it in the next update (thanks for the logs). I can't say anything about the Android TV app, I've never used it

[dsm150]

connect via ssh and show the output of these commands

2|:/vendor/etc/dropbear # dmesg | grep wifi
[    0.000000] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 otg_device=1 reboot_mode_android=normal androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=1080i60hz frac_rate_policy=1 cvbsmode=576cvbs hdmitx=,444,8bit cvbsdrv=0 irq_check_en=0 androidboot.firstboot=0 jtag=apao androidboot.veritymode=enforcing androidboot.hardware=amlogic page_trace=on androidboot.rpmb_state=0 androidboot.serialno=1234567890 androidboot.wificountrycode=US ro rootwait skip_initramfs androidboot.dtbo_idx=0 vmalloc=512m --cmdline root=/dev/mmcblk0p18 buildvariant=userdebug
[    1.553457] wifi: power_on_pin_OD = 0;
[    1.555833] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
[    1.561747] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
[    1.568419] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
[    1.575063] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
[    1.595273] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=487
[    1.601224] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
[    1.608217] aml_wifi wifi: [wifi_dev_probe] power_on_pin=486
[    1.614087] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
[    1.620119] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
[    1.625509] aml_wifi wifi: [wifi_setup_dt] irq num is:(69)
[    1.631072] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(487)
[    1.637031] aml_wifi wifi: [wifi_setup_dt] power_on_pin(486)
[   11.988300] dhd_wifi_platform_load: Enter
[   11.997372] wifi_platform_set_power = 1
[   12.006575] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 486
[   12.214815] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 486
[   12.722708] wifi_platform_bus_enumerate device present 1
[   13.230544] wifi_platform_set_power = 0
[   23.218085] wl_android_wifi_on in 1
[   23.221671] wl_android_wifi_on in 2: g_wifi_on=0
[   23.226332] wifi_platform_set_power = 1
[   23.235813] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 486
[   23.478517] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 486
[   24.394739] dhd_os_open_image1: /vendor/etc/wifi/buildin/config.txt (47 bytes) open success
[   24.421557] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
[   24.423251] Final nv_path=/vendor/etc/wifi/buildin/
[   24.428264] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
[   24.439576] Final conf_path=/vendor/etc/wifi/buildin/config.txt
[   24.443769] dhdsdio_download_code_file: Open firmware file failed /vendor/etc/wifi/buildin/fw_bcm40183b2.bin
[   24.478907] wifi_platform_set_power = 0
[   24.488438] wl_android_wifi_on: Failed
[   24.491805] dhd_open : wl_android_wifi_on failed (-35)
[   24.504337] wl_android_wifi_off in 1
[   24.508691] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
[   24.523989] wifi_platform_set_power = 0
[   24.532785] wl_android_wifi_off out
[   29.546251] wl_android_wifi_on in 1
[   29.549970] wl_android_wifi_on in 2: g_wifi_on=0
[   29.554653] wifi_platform_set_power = 1
[   29.563858] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 486
[   29.770612] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 486
[   30.431237] dhd_os_open_image1: /vendor/etc/wifi/buildin/config.txt (47 bytes) open success
[   30.458057] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
[   30.465212] Final nv_path=/vendor/etc/wifi/buildin/
[   30.469659] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
[   30.475652] Final conf_path=/vendor/etc/wifi/buildin/config.txt
[   30.483848] dhdsdio_download_code_file: Open firmware file failed /vendor/etc/wifi/buildin/fw_bcm40183b2.bin
[   30.520193] wifi_platform_set_power = 0
[   30.528959] wl_android_wifi_on: Failed
[   30.532802] dhd_open : wl_android_wifi_on failed (-35)
[   30.545252] wl_android_wifi_off in 1
[   30.549027] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
[   30.564834] wifi_platform_set_power = 0
[   30.574114] wl_android_wifi_off out
[   36.935470] wl_android_wifi_on in 1
[   36.943922] wl_android_wifi_on in 2: g_wifi_on=0
[   36.943959] wifi_platform_set_power = 1
[   36.962809] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 486
[   37.572984] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 486
[   38.715571] dhd_os_open_image1: /vendor/etc/wifi/buildin/config.txt (47 bytes) open success
[   38.769828] Final fw_path=/vendor/etc/wifi/buildin/fw_bcm40183b2.bin
[   38.781503] Final nv_path=/vendor/etc/wifi/buildin/
[   38.781550] Final clm_path=/vendor/etc/wifi/buildin/clm.blob
[   38.794927] Final conf_path=/vendor/etc/wifi/buildin/config.txt
[   38.797102] dhdsdio_download_code_file: Open firmware file failed /vendor/etc/wifi/buildin/fw_bcm40183b2.bin
[   38.881624] wifi_platform_set_power = 0
[   38.885820] wl_android_wifi_on: Failed
[   38.905977] dhd_open : wl_android_wifi_on failed (-35)
[   38.927166] wl_android_wifi_off in 1
[   38.927206] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
[   38.944032] wifi_platform_set_power = 0
[   38.964326] wl_android_wifi_off out
:/vendor/etc/dropbear #

130|:/vendor/etc/dropbear # dmesg | grep chip
[    0.229291] Meson chip version = RevB (21:B - 82:0)
[    1.119969] hdmitx: system: hdmitx_device.chip_type : 3
[    1.313201] chip type:0x21
[   10.308030] The chip is not support hevc encoder
[   12.976035] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
[   12.991114] dhd_conf_set_chiprev: chip=0x4330, chiprev=4
[   24.368562] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
[   30.422170] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
[   38.688316] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
:/vendor/etc/dropbear #

about voice search
I’m using an Android TV app as a remote control, and the search works, but only on YouTube. In the voice search settings, an empty window, photo below.


it was exactly the same when upgrading to android 9 on mi box S, they urgently released an update and this problem was fixed.

[bumerc]

Hi,

I have problem with this rom on my MX95Pro 4k alias TX5PRO, wifi is working, but bluetooth doesn´t turn on, my remote won´t work, i tried copy remote.conf into /system/etc but don´t work. I wanted to change this rom i must short pins.. Can you help me with this problems? Thanks.

Board is named CS_905X_TX_V1.1 and wifi chip is Fn-Link 8223A-SR F10019 1643

In photo is my box and my remote.

/vendor/etc/remote.cfg

Always do this via SSH or ADB with compliance with all file permissions

e.g

mount -o rw,remount /vendor
cp /sdcard/remote.conf /vendor/etc/remote.cfg

reboot via UI

[bumerc]

You just add wifi drivers to vendor more.There will be more likelihood that wifi will work.

The problem was with FW and the order of loading the wifi driver, a simple copy will not solve this problem. In this firmware, by default, all WiFi drivers are in the vendor partition.

[bumerc]

dsm150
passphrase = ampere

look at the first post, there is an update
Voice-Search works out of the box, check the configuration of your bt remote control, unpair and pair it again

[dsm150]

connect via ssh and show the output of these commands

Using username "root".
Pre-authentication banner message from server:
| #################################
| * * * * * * * * * * * * * * * * *
| * Welcome to ampere SSH-server! *
| *                               *
| * * * * * * * * * * * * * * * * *
| #################################
End of banner message from server
Authenticating with public key "imported-openssh-key"
Passphrase for key "imported-openssh-key":

Can't connect (((

[sagert]

connect via ssh and show the output of these commands

dmesg | grep wifi

and

dmesg | grep chip

You just add wifi drivers to vendor more.There will be more likelihood that wifi will work.

[freakbox]

Hi,

I have problem with this rom on my MX95Pro 4k alias TX5PRO, wifi is working, but bluetooth doesn´t turn on, my remote won´t work, i tried copy remote.conf into /system/etc but don´t work. I wanted to change this rom i must short pins.. Can you help me with this problems? Thanks.

Board is named CS_905X_TX_V1.1 and wifi chip is Fn-Link 8223A-SR F10019 1643

In photo is my box and my remote.

[dsm150]

I'm doing something wrong ((

Using username "root".
Pre-authentication banner message from server:
| #################################
| * * * * * * * * * * * * * * * * *
| * Welcome to ampere SSH-server! *
| *                               *
| * * * * * * * * * * * * * * * * *
| #################################
End of banner message from server
Authenticating with public key "imported-openssh-key"
Passphrase for key "imported-openssh-key":

[bumerc]

connect via ssh and show the output of these commands

dmesg | grep wifi

and

dmesg | grep chip