Rom: Android Pie for S912

[marciobill]

@marciobill,

Beelink GT1 Ultimate

For revision LPDDR3, Wi-FI -AP6255, SN: LPN1, SN: AGTA

It is possible that hardware (LPN1) is very similar...?

https://slimboxtv.ru

*** Always know how to UnBrick your China Box before tweaking/flashing. ***

thank you very much for your attention

[ReaperMan]

slimBOXtv 15.1

Changes:
• Added support for Bromite SystemWebView (download from the project website)
• The AOSP keyboard startup icon is hidden
• Replaced Setup Wizard (ATV)
• Fixed issue with logging in to Google account
• Updated WebView and Google Play service
• Added additional Bluetooth settings with the display of the battery charge of the remote control
• Increased logo and boot animation size
• Added AOSP keyboard with Holo Blue theme by default
• Adjustments to the operation of image modes
• Added optimally configured Nova Launcher mod, activated as master (PIE)
• Google services with less memory and CPU usage are used
• Key reassignment has been modified in the Button Manager and is launched from the settings
• Systematic amendments

• Added support for Bromite SystemWebView (you can download it from the project site)
• Hidden launcher icon for AOSP keyboard settings
• Replaced by Setup Wizard (ATV)
• Fixed issue with google account login
• Updated WebView and Google Play service

Clean installation is strongly recommended !!!

Download ATV or PIE

https://slimboxtv.ru

[gkohar]

Reaper Man

Thanks for the advice..
I've tried flashing the wisdom rom, but it keeps rebooting randomly Finally I thought maybe it was due to a lack of power, so before I bought a new adapter I tried to parallel it with a power usb (power bank) and it worked my unit didn't reboot at all for 1 hour of use

Looks like I really have to buy a new adapter with more power

Thank you for all

This is my device

https://drive.google.com/file/d/118g...w?usp=drivesdk

https://drive.google.com/file/d/117F...w?usp=drivesdk

[gkohar]

I have this Box 3 / 32 collecting dust at the moment.

I seem to remember issues with Power Supply
Also read on old Threads 2amp output is not actually true 2 amps
Something like 1.4 amps....

Maybe try Adapter with 3 amp output

Happy testing

Thanks for the advice

Yes, it seems your suggestion is correct. I've tried paralleling the power with usb (powerbank) and apparently the reboot problem doesn't occur

I was ill buy a new adapter

[gkohar]

Wisdom PCB manufacture

They only followed up with 2(?) firmwares.

Last official:

Android 7.1.2 H96PROPLUS_mac_201701120.7z

https://mega.nz/folder/8qhRRaYJ#2ZA3VLjvLT6wg0IwsTF27g/folder/Bqo1FDoQ

The Bootloader may have been made more stable?
Try this firmware? If stable, update to sbx v15, do not >Erase Boodloader< ?

Nice fan.. if it draws too much power (the power supplies are poor) = brownout and a reboot will happen.
I've used a powered USB hub in the past(experimented with batteries also )

Thanks for the advice..

I've tried flashing the wisdom rom, but it keeps rebooting randomly Finally I thought maybe it was due to a lack of power, so before I bought a new adapter I tried to parallel it with a power usb (power bank) and it worked my unit didn't reboot at all for 1 hour of use

Looks like I really have to buy a new adapter with more power

Thank you for all

This is my device

https://drive.google.com/file/d/118g9Q_cuSKJW5RAcLywzYyVHYIl9QHEq/view?usp=drivesdk

https://drive.google.com/file/d/117F6X3_GTmK-jzSHK7ExLa3akJHoEMTB/view?usp=drivesdk

[freddy]

Thanks for the advice, I'll give it a try. I'll let you know later

It's quite confusing for me.. Because sometimes it just reboots immediately, sometimes it takes up to 15 minutes to reboot and it also takes up to 1 hour not to reboot at all, you could say it's random

I have this Box 3 / 32 collecting dust at the moment.

I seem to remember issues with Power Supply
Also read on old Threads 2amp output is not actually true 2 amps
Something like 1.4 amps....

Maybe try Adapter with 3 amp output

Happy testing

[marciobill]

@marciobill,

Port_SLIMBOX ATV-x92-v14.7_to_ Z69 _Plus (LPDDR3) (ATV)


Get it before it is taken down

Dev:lyubodelev (4Pda)


https://mega.nz/file/9NxiVZiB#WgSZOT...XH6glnf6ZBseN4

Olá ReaperMan , está é apenas uma atualização ? Precisa de instalar um firmware antes desta atualização ou posso atualizar minha tv box z69max 2 com está atualização ?

[gkohar]

Thanks for the advice, I'll give it a try. I'll let you know later

It's quite confusing for me.. Because sometimes it just reboots immediately, sometimes it takes up to 15 minutes to reboot and it also takes up to 1 hour not to reboot at all, you could say it's random

[ReaperMan]

Wisdom PCB manufacture

They only followed up with 2(?) firmwares.

Last official:

Android 7.1.2 H96PROPLUS_mac_201701120.7z

https://mega.nz/folder/8qhRRaYJ#2ZA3VLjvLT6wg0IwsTF27g/folder/Bqo1FDoQ

The Bootloader may have been made more stable?
Try this firmware? If stable, update to sbx v15, do not >Erase Boodloader< ?

Nice fan.. if it draws too much power (the power supplies are poor) = brownout and a reboot will happen.
I've used a powered USB hub in the past(experimented with batteries also )

[gkohar]

@gkohar,

Are you currently on Android 9?
There are about 7 versions of the PCB
Green board, blue board and black PCB board

How does the China Box run with factory firmware? (android 7?)
Does it reboot if you do not use it?

If it runs fine for a short while....
-Likely heat issue
-or failing power supply
-or corrupt memory chips

Yes, I'm using Android 9 (slimbox port to ddr3 / aidans rom ddr3 ddr4 )

Strangely when I'm using Android 7.1.2 H96PROPLUS_mac_20170826.7z the reboot problem reappears

For the hardware I'm using the board is green, I've also modified a small fan to make it less hot

This is my pcb

https://drive.google.com/file/d/10G5LQIZi6ZRfIaWTfP3J05Ne6JiaYF_A/view?usp=drivesdk

https://drive.google.com/file/d/10V5BPnm_GYiYxJVxMRILM-OpoA1xRZ0D/view?usp=drivesdk

[ReaperMan]

• slimBOXtv version: 15

Changes:

• Added additional Bluetooth settings with displaying the battery charge of the remote control
• Increased the display size of the logo and boot animation
• Added AOSP keyboard with default Holo Blue theme
• Corrections to the operation of image modes
• Added optimally tuned Nova Launcher mod, activated as master (PIE)
• Involved Google services with less memory and CPU usage
• Key remapping has been modified in the Button Manager and is launched from the settings
• System amendments

Clean installation is strongly recommended !!!


Download ATV or PIE

https://slimboxtv.ru

[ReaperMan]

@marciobill,

Beelink GT1 Ultimate

For revision LPDDR3, Wi-FI -AP6255, SN: LPN1, SN: AGTA

It is possible that hardware (LPN1) is very similar...?

https://slimboxtv.ru

*** Always know how to UnBrick your China Box before tweaking/flashing. ***

[ReaperMan]

@marciobill,

Port_SLIMBOX ATV-x92-v14.7_to_ Z69 _Plus (LPDDR3) (ATV)


Get it before it is taken down

Dev:lyubodelev (4Pda)

https://mega.nz/file/9NxiVZiB#WgSZOTaGkqToDz44crQujl1AX5T7vXH6glnf6ZBseN4

[ReaperMan]

@gkohar,

Are you currently on Android 9?
There are about 7 versions of the PCB
Green board, blue board and black PCB board

How does the China Box run with factory firmware? (android 7?)
Does it reboot if you do not use it?

If it runs fine for a short while....
-Likely heat issue
-or failing power supply
-or corrupt memory chips

[gkohar]

Thank you very much for your answer ReaperMan, I have followed the steps as you indicate but everything remains the same. I can't get Android 9 to work, I've tried every firmware I've found that should work on my H96 Pro+. I have even tried with 3A power adapters and I have also adapted a cable from the computer power supply taking a 5v and 5A output, but with no luck.

The same thing happens with all of them, when starting up the logo appears and after a while it restarts and so on.

Let's see if someone who has the same model and it works for him can tell me what firmware he has put on it. It is important that it is the one for v5 (CZ-S32-v5).
The technical data that I have available are the following.

H96 Pro+ Amlogic s912 CZ-S32-v5 (3+32/9377)
GL850C USB 4 PORTS
Aigale AW-CM273SM WIFI AND BLUETOOTH
HYNIX H26M64103EMR 32GB MEMORY
RTL8211F LAN1000

I don't know the brand of the RAM, it's covered by the trigger and I don't dare to remove it, I can say that I think it's on a single 3GB chip.

Greetings.

How sir does the solution work? I have a h96 pro+ having the same crash as yours, always restarts after a few minutes Mine is DDR 3 3/32 GB