If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My TV Box: Tanix TX3 4GB,32GB Amlogic S905X3 2.4G/5GHz Dual Wifi BT 4.2 QZ
High-Resolution PCB Picture: https://ibb.co/zbqW5HH
Details from PCB: CS_905X3_TX95_B4_QZ_V1.2 (So this a QZ version of the Board)
WIFI Chip:
SP6330
ZX190906
I flashed this SLIMBOX ATV9 ROM (QZ version)
Clock LED, IR Remote, BlueTooth, Lan, Wifi everything is working as expected.
I have used USB Burning Tool to install this ROM.
The reset pin is next to the power plug.
A project to create firmware for TV boxes and sticks with an Amlogic processor.
Amlogic S905X, S905X2, S905X3, S912, S922, S905W, S905W4, S905Y2, S905L (Android 9)
Amlogic S905X4, S905W2, S905Y4 (Android 11)
slimBOXtv ATV and AOSP are two...
Just looking to see why the SLIMBOX ROM was deleted from this section? Seems to be a very promising ROM and have been using it for the last few days. Is there any particular reason?
I burned SLIMROM with the Amlogic USB Burning Tool and the box powers up with the VFD showing "boot" and the SLIMBOX logo on the screen but nothing after that.
Soon after my previous post,I just went back to stock firmware. Eventually got around to paying attention to this and discovered that I had the BZ variant in hardware but was flashing the QZ variant. Once I fixed that, everything is working fine.
This ROM is amazing !! I flashed the ATV on my Transpeed X3 Plus and I'm so happy. I've been looking for a few months for a suitable replacement to the crappy stock firmware.
This ROM is amazing !! I flashed the ATV on my Transpeed X3 Plus and I'm so happy. I've been looking for a few months for a suitable replacement to the crappy stock firmware.
Can you please tell us your WIFI Chip?
I had frequent disconnect of wifi in my Tanix TX3 with this ROM.
Can you please tell us your WIFI Chip?
I had frequent disconnect of wifi in my Tanix TX3 with this ROM.
My Transpeed has a AP6330 wifi chip.Are you suure you got the ROM from the right place? I went from here to XDA to a Russian site to finally get the right one. Here is a link to the site. You'll find a link on that site for your Tanix X3 that will have the ATV and the Pie Image.
Can you please tell us your WIFI Chip?
I had frequent disconnect of wifi in my Tanix TX3 with this ROM.
My Transpeed has a AP6330 wifi chip.Are you suure you got the ROM from the right place? I went from here to XDA to a Russian site to finally get the right one. Here is a link to the site. You'll find a link on that site for your Tanix X3 that will have the ATV and the Pie Image.
Before I buy
Could anybody in Europe or North America Please confirm the GOOGLE PLAY Webscare appk works on the Tanix TX3.
Make sure the MSNBC, CNN, and FOX video's are functional
The appk is blocked in CHINA and therefore cannot be tried in China
PS: For some reason, the appk does not work in North America with the Tanix TX6-MINI and TX6S
But it works on my Tablet and android phone and Alfawise S95 TV box
You may only view thumbnails in this gallery.
This gallery has 1 photos.
My Transpeed has a AP6330 wifi chip.Are you suure you got the ROM from the right place? I went from here to XDA to a Russian site to finally get the right one. Here is a link to the site. You'll find a link on that site for your Tanix X3 that will have the ATV and the Pie Image. https://telegra.ph/Skachat-proshivku...firmware-09-11
Hi I have tx3 s905x3 and i was able to install slimbox 11.6 and everything is OK but after boot launcher crash for 10-20 seconds then come back or I am unable to install apps and some apps when open crash and also box reboot. And even if I burn original firmware or any other firmware with UBT its the same thing. I put slimbox on many boxes before and never happen before except for a tx3 mini 1.6 not long time ago had exactly the same problem after burning slimbox. Launcher or apps crash and when i burn original firmware or any other with UBT after the problem still there.
Anyone had this problem before? I don't think its something with slimbox cause I use it for many boxes and always great rom except for these 2 boxes.
I think maybe something mess up with partition or something that cant be fix by only burning other firmware
For anybody interested here is the new Slimbox link the old link still works but none of the files are there anymore. You'll a translater unless you can read Russian.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment