X96 Mini bricked. motherboard Q6X v2.3 HELP ME PLEASE

[lomar02250]

Hello, sorry if my english is not good.

I have an x96 mini box with Q6X v2.3 card I bricked this box by installing atvxperience since the box remains stuck on the atvx logo. I used USB Burning tool to install this image. now the box is no longer recognized by the pc, I have the original firmware but I cannot reinstall it. I read on the forum that the NAND had to be bypassed. I found the "Micron JWC81" chip but I cannot find the shorted pins. could you help me please. Thanks in advance.

https://imageshack.com/i/pnhmrlHCj

https://imageshack.com/i/pnyvR6kIj

https://imageshack.com/i/pnhmrlHCj

[t_hy36]

Hello, sorry for my english too !!

I have same Board Q6X V2.3 18186 bricked too. I used USB burning tool to try to install various downloaded firmware beacause i don't have the original one.
I use one wire solded to the board and a switch connect to ground to be recognize by usb_burning_tool and enter in flash mode.

Can we help us ?

[saidi.alg]

[HELP] X96 mini Q6X v2.3 18186 Bricked

https://www.mediafire.com/view/tmmje7pgr4ihs6a/1607003462071.JPEG/file#

https://www.mediafire.com/view/zo4yyo1cvb7j4xr/1607003380754.JPEG/file#

[t_hy36]

Hello,
I try ATXexperience ROM 4.1 and 4.2.1 : Not working

ram SAMSUMG K4B4g0446Q
emmc hynix H26M52103FMA

Red light

Error code : (depend on rom)
0x10105004 Error result
0x10105002 USB Control setup error

Thanks

[saidi.alg]

https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/817344-help-x96-mini-q6x-v2-3-18186?p=817520#post817520

[t_hy36]

Hello saidi.alg

I read and see your picture. Do you suggest to short the 2 pads circled, to enter in flash mode in usb burning tool ?

Thanks

[Rccm1112]

I used the Amlogic burn card method with the Android 7 firmware linked below. Fixed the brick and my wifi issues with android 9.

https://4pda.to/forum/index.php?s=&showtopic=936891&view=findpost&p=101150213