M96X PLUS STOP WORK

[paokarass]

Hello im new at this forum..I have problem with my m96x plus tv box he stopped worked....
when i open it he stuck in s912 logo .... i try to flash with USB BURNING TOOL but stop at 7% with problem 0x32030201]Uboot/Get result/DiskInitial error (i try so many roms but thie problem remain) i also try the sd card method but dosent work PLEASE HELP ME I TRY EVERYTHING BUT ANYTHING DIDNT WORK YOU ARE MY ONLY CHANCE
the motheroard is black

[superceleron]

Check here: https://forum.freaktab.com/node/637675

[soldiaz]

If you cant get into flash mode then short pins (try any, you almost cant damage annything) within the marked area

If you can get into flashmode then get correct firmware for ur device or try some generic from aidanmacgregor or SlimHouse

[paokarass]

how i know if my device go to flash mode

[soldiaz]

In Burning Tool you see "device connected"?

[paokarass]

yes

[paokarass]

i use all the pins but i get the same error and stack at 7%

[paokarass]

and with another cable the same

[gefattern]

Hi ,

maybe something is bricked , did you changed the temputure range inside the Flashtool ,

this sometimes helps , but a Disk Error never sounds good , looks the Tool cant reach it ,

further good luck / gefattern

big G says :

The error message indicates that you may be using the wrong firmware, so the burning is not successful

[paokarass]

I tried to change temp from 0-90/ 20-60 and again nothing.. I download stock firmware from here:https://chinagadgetsreviews.com/down...-tv-box-2.html

Also I try custom roms and I get the same error

[soldiaz]

Maybe encrypted firmware? Then u need original one ....no other possibility

[paokarass]

I don't know how I find the official?

[superceleron]

I suspect you emmc failed, if you still cant flash even the stock fw.

[soldiaz]

Ah, he has Stock by Hand?

[superceleron]

Yes i think is what he said in post 10