I bricked my new UG802

[lungomare]

Hi,
I have new UG802 but bricked after a flash update.
The PCB is different from a UG802 that I have see in this site.

If I connect the dongle at TV the screen remain black. I think that a new firmware can resove the problem but I can not update it.

I have see more post in this site with a procedure for unbrick with use a reset pin but in my PDC I don't have a reset pin as a http://www.freaktab.com/attachment.p...4&d=1352093258
Can you help me please?
Thansk


This is a image from my dongle.

[lungomare]

Hi,
I have new UG802 but bricked after a flash update.
The PCB is different from a UG802 that I have see in this site.

If I connect the dongle at TV the screen remain black. I think that a new firmware can resove the problem but I can not update it.

I have see more post in this site with a procedure for unbrick with use a reset pin but in my PbC. What is the reset pin in on't have a reset pin as a http://www.freaktab.com/attachment.p...4&d=1352093258
Can you help me please?
Thansk


This is a image from my dongle.

[ATTACH=CONFIG]4228[/ATTACH]

[ATTACH=CONFIG]4227[/ATTACH]

I have used a internal switch and I see this on the screen.

How I put a new firmware in this dongle?
Can you help me?

Thanks

[lungomare]

I have used a internal switch and I see this on the screen.

How I put a new firmware in this dongle?
Can you help me?

Thanks

Never, i have test a different PIN NAND RESET but never!
Can anyone help me?
Thanks

[Din0]

Damage reset pin

Hallo,
There is damaged RESET pad on my PCB of UG802 device. Is there any chance to find RESET wire directly on microprocessor or another IC on PCB? r
My NAND Chip:MT 29F32G08CBACA

Thanks
Edit:
I have solution:
PIN 7 and 8