MK 808B Clone HELP

[bruce081]

I have a MK808B Sunvel Clone here that will get the linux pengiuns and hang there. I cant get the RKBatch Tool to see it. Any help appreciated.

Bruce

Able to get into rkbatch now, pc driver issue.

[bruce081]

I am able to erase nand in rom flash tool. Im able to put stock clone rom on it in Rkbatch tool (im 100% sure this is correct clone rom and working. Ive used on this mk808 already). This is a friends and he flashed the wrong rom. Still just hanging on linux penguins. What do I try???

[bruce081]

Just downloaded the MK808B Sunvel 1.7 tryed this. Erased nand 15 time then wrote file. Same result the hanging linux penguins. Im starting to think its cooked?

[thanhtrat1ltv]

You can turn to flash mode here

Flash mode using the reset button:
If you do not ever see the flash tool say "Found RKAndroid MASS Storage USB"
Or reboot to flash mode does not work, then use this manual proceedure.
1) Have the USB cable unplugged.
2) Near the HDMI port are 2 holes in each corner. One is the blue LED hole.
The other in the corner is a reset button under the hole.
Use a paper clip or something to push the reset button in this hole.
I actually enlarged the hole so a paper clip would fit.
You will feel the button "click" when you are on it.
3) Hold this button down and while holding it, plug the USB cable from the PC to the OTG port on the mk808B.
4) YOu should here windows BONG it found a new device. The LED will not light!
5) You are now in ROM flash mode. Read below for installing drivers.

[bruce081]

Thats how i flash it. Its the only way i can get it to connect to pc

[bruce081]

Anyone?

[thanhtrat1ltv]

my email [email protected] ill try help u.

[bruce081]

Thanks

[bruce081]

Re: MK 808B Clone HELP

my email [email protected] ill try help u.

Thanks for helping get it working. For anyone wanting to know my solution. It was flashing the mediateck.img (701mb). Its boots great. Just need to solve the wifi not turning on. Check it... Hangs 5—10 seconds unchecks itself.