Stuck in recovery

[Gibby]

So I have this MK808, http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

I used the generic MK808 CWM zip to flash recovery and now the device only boots to recovery.

I did not install the drivers as I don't have a windows machine, so using the MASK ROM mode I don't think will work unless there is tool for linux.

When checking with adb, I get: List of devices attached ???????????? no permissions



Any ideas? I couldn't get it to boot to the bootloader either, while holding down the button and plugging USB in OTG or Power port. When I do hold the button down and plug in USB to OTG port, it just stays on a black screen.

[mitchell4you]

https://github.com/linuxerwang/rkflashkit

Yes..
There is a linux tool 'rkflashkit' see link above

Goodluck

[mo123]

So I have this MK808, http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

I used the generic MK808 CWM zip to flash recovery and now the device only boots to recovery.

I did not install the drivers as I don't have a windows machine, so using the MASK ROM mode I don't think will work unless there is tool for linux.

When checking with adb, I get: List of devices attached ???????????? no permissions



Any ideas? I couldn't get it to boot to the bootloader either, while holding down the button and plugging USB in OTG or Power port. When I do hold the button down and plug in USB to OTG port, it just stays on a black screen.

Flash this CWM rom after replacing the kernel with a MK808 one.
Erase cache, dalvik & factory reset then install from external SDCard and select the rom from your MicroSD card or usb flash drive.

http://www.freaktab.com/showthread.php?9186-MK808B_digitopMod_v3-5-5-XBMC-Edition-%2824-Dec-2013%29

[Gibby]

I meant to bring this with me into the office today but forgot. I will give that a shot when I get home.