problem with m6pro 3g

[superehj]

hello, i have a problema with my m6pro 3g, i try change rom and my Tablet doesn´t run. please help me.

it lock in pipo interactiv media 4.2.2


and sorry for my english

[Billcnz]

hello, i have a problema with my m6pro 3g, i try change rom and my Tablet doesn´t run. please help me.

it lock in pipo interactiv media 4.2.2


and sorry for my english

Which ROM did you try?

Sent from my M6pro using Tapatalk 4

[superehj]

problems with m6pro 3g

i had try kasty-pipo-m6_pro_3G-422-20130823-rooted4
M6pro_M6pro_3G_eng_rus_gps_1.1.0_update_20131125
M6pro_update_3G_chinese_20130913
in the rockchip batch tool is ok upgrade done success 1 fail 0
but my m6pro 3g doesn´t run
it stay in pipo nteractive media 4.2.2

[rrileypm]

I realize you are just trying to find a ROM that works...that's exactly how I found Freaktab in the first place back when I was trying to flash my very first tablet. I definitely feel your pain.

However, it's difficult for me to support your problem, if you haven't tried my ROM. It uses a different flash tool...that is included in the ROM kit.

One MAJOR thing to check is that you actually have an M6 Pro tablet. None of those firmware versions will work if you are flashing them to an M6 Max tablet. I would make sure you have an M6 Pro.

If you are trying the Upgrade button to flash...try Restore, instead.

Also be sure you are using the same USB cable that came with your tablet (another important item). Pipo requires a longer micro SD jack to reach all the way into the case.

[superehj]

problems with m6pro 3g

sorry, you talk me the rom for my dispositive and manuals for restore

please

i find http://www.freaktab.com/showthread.p...o-RileyROM-1-5, i think that this rom is for my m6pro 3g, is it correct?, with program restore my dispositive?

thank for you help me

[superehj]

problems with m6pro 3g

i flash Pipo_M6_Pro_RileyROM_1.5.1 and my m6pro 3g stay in pipo with logo de rileyrom and freaktab.com
doesn´t run again

please help me

[superehj]

problems with my m6pro 3g

excúseme, i don´t put my device in debugging mode, i think that is the error that i did,

because my device doesn´t run and now i can´t put on debugging mode

please please help me

[manao]

Maybe you can try that

Q: The flash procedure went wrong somehow, now the tablet will not respond.
A: Connect via USB to your PC
Start the Flash app on your PC
Press and hold the ESC button for 5 seconds.
While holding the ESC button put a paperclip in the reset hole and press and hold it for 5 seconds.
While still holding the Esc button and the Reset button, press the power button and hold.
You will see the flash tool recognize your device in loader mode.
Release the ESC key
Release the Reset button
Keep holding the power button with your thumb (if you let go, it will go out of loader mode and you will have to start over).
Click Erase IDB, let it finish. The number on the right should count up to the number on the left.
Click Flash ROM. Sometimes you will need to keep holding the power button until flashing is finished.
Then just disconnect the USB cable when flashing is complete.