TWRP Recovery with UBIFS Support For Amlogic Nextbook Tablets (Support Thread)

[silver9990]

You're welcome. I don't have that device so I don't really know much about it but if there's anything you need help with I'd be happy to do what I can.

[ojacksonhill]

Thanks so much! And thanks to shaunmt for the original work.

[silver9990]

Here's a link from archive.org, thankfully they had 1 copy of the file archived.

https://web.archive.org/web/20140725190832/http://www.freak-tab.de/ShaunMT/TWRP_Amlogic/SMT_TWRP_Next7HD8G-NXM7000NBD_WMN.zip

[silver9990]

I don't suppose that that one would work for the NX007HD8G? shaunmt's link is to a file called SMT_TWRP_Next7HD8G-NXM7000NBD_WMN.zip

But if it is suitable I'd be grateful!

My bad, I didn't pay enough attention & got the models mixed up. Unfortunately it won't work as far as I know.

[ojacksonhill]

I don't suppose that that one would work for the NX007HD8G? shaunmt's link is to a file called SMT_TWRP_Next7HD8G-NXM7000NBD_WMN.zip

But if it is suitable I'd be grateful!

[silver9990]

Hi there, the download link for the TWRP recovery for NX007HD8G doesn't seem to be working for me. Has the link been closed?

The link seems to be broken, I have an old copy (SMT_TWRP_Next8HD8G-NXM8000ND_WM.zip), if you'd like I could upload it for you.

[ojacksonhill]

Hi there, the download link for the TWRP recovery for NX007HD8G doesn't seem to be working for me. Has the link been closed?

[foxccs]

Thank you for eveything mr.shaunmt is there anything new about the next7p12-8g m712mc_mb?

Hi
I have just registered to put a feedback....
I had the same model "next7p12-8g", with motherboard number "m712mc_mb" , the tablet was stuck in the first screen (Abraham Lincoln's saying about the books).
Few times of Factory reset did not helped, so TWRP was the only hope.
Finally I have completed the firmware update using SMT_TWRP_Next7P12-8G-NXM727MC_WM.zip as the program and SMT-Next7P12-8G-NXM727MC_WM-082313-8188eu_wifi.zip as a firmware.
My WiFi card was RTL8188 so this firmware was the correct one for the WiFi.
I can confirm that there was a major problem with TWRP having problems with the touch screen, even clicking on a simple buttons was like 1/4 of a success.
The slider for confirming the flash was a finale, but after a few days of trying , I got lucky. The slider moved to the right end, when most of the time it was not moving at all.
Even going to the halfway was a rare success. I understood that I should make the whole movement to the right, even the slider didn't wanted to move at all. As said, finally i have succeeded.
So, it was not about the center of the touch being displaced (maybe it was displaced a bit to the up side, but that was not the major problem).
It was more about the pressure of the finger (This was mentioned in one of the previous pages). I have succeeded with more like lighter pressure on the touch screen.
Otherwise, programming the firmware went without problems, first starting of the tablet was slower, which is understandable, WiFi worked as well.
BIG Thanks to Freaktab and Shaunmt for making this possible.

[Thermal_cause]

Could you please make a custom recovery for my nextbook 7/NX700qc I changed my build prop and I am stuck HELP!!

[Eduard Chiperi]

what's your serial number?
and your ro.product.board name?

[newby]

I found my nx008hd8g ro.product.board with Prop build editor app

[newby]

With Twrp recovery its so easy to backup&root it seemed hard at first but its very easy i downloaded a unzip app i unzipped twrp i put the ulmage recovery on my external sd powered off nx008hd8g opened up twrp with power&+volume button perform a backup reboot dowloaded kyser root open up twrp go to install find kyser root & tap install reboot to root easy peesy

[Eduard Chiperi]

it seems that this forum is dead, unfortunately....

[newby]

I'm new to this could you give me more detail on the process

[newby]

So I'm new to this could you give me a lil more detail to what exactly I be doing