HK1 Play Smart TV Box Android 9.0 - Black 2GB RAM+16GB ROM BT wifi RT 8189

[soldiaz]

I dont remember..

[Nigel]

Firmware 2/16GB Version: https://mega.nz/#!Pk0TjAbC!lKXRMFirW...XwI1VHPLwOOZv8

Does the firmware exist version 4/32, 64, 128GB??? I just found the firmware version 2/16 GB, my HK1 Play is version 4/128GB.

[Adam_flued]

Firmware 2/16GB Version: https://mega.nz/#!Pk0TjAbC!lKXRMFirW...XwI1VHPLwOOZv8

Does the firmware exist version 4/32, 64, 128GB??? I just found the firmware version 2/16 GB, my HK1 Play is version 4/128GB.

The seller gave me stock firmware 4/32 but unrooted ...

[Adam_flued]

Here the link for the 4/32 version (Unrooted): https://drive.google.com/file/d/1Kmm...w?usp=drivesdk...

[Nigel]

Here the link for the 4/32 version (Unrooted): https://drive.google.com/file/d/1Kmm...w?usp=drivesdk...

Thanks, now we need the stock firmware version 4/32, 64 or 128GB with root.

[SiddyKing]

Here the link for the 4/32 version (Unrooted): https://drive.google.com/file/d/1Kmm...w?usp=drivesdk...

Hello,

I've downloaded the firmware ROM, but when I try to install it with USB burning tool,
it gives me an error: Getting key failed, can you post the mac_ether / wifi .ini key file?

[Adam_flued]

Copy folder ”License" to C:/program files/amlogic/UsbBurningTools. License link : https://drive.google.com/file/d/17U6...w?usp=drivesdk

[SiddyKing]

Copy folder ”License" to C:/program files/amlogic/UsbBurningTools. License link :? https://drive.google.com/file/d/17U6...w?usp=drivesdk

Thank you very much for such a fast response.
And also the file works, THANKS A TON for that too.

[Adam_flued]

You're wellcome

[SiddyKing]

You're wellcome

Now I am getting this error:

[0x10102002]Romcode/Initialize DDR/Initialize PLL/USB Control setup error



Figured> I was using an older version of USB burning tool, that's why this was happening.
then I used a newer version (2.1.6.8) that completed the job successfully.

[paultje_007]

Any news if there is a rooted Finless ROM out yet for this HK1 Play version 4G/32Gb 64 or 128Gb???

[Nigel]

Here at home the power went out twice yesterday and after that my TV Box HK1 Play stopped recognizing any device in the two USB inputs, already tested pen-drive (it turns on a led) but not the data only the USB drawing, air mouse remote control nothing happens, usb wired mouse does not work, thought it had burned, but the two USB inputs have power, what do I do??? I've tried to factory reset both recovery and Android settings, and still don't recognize any USB plugged in Box, I'm thinking of flashing this rootless 4 / 32gb rom to see if the USB inputs work again, what do you think????Here at home the power went out twice yesterday and after that my TV Box HK1 Play stopped recognizing any device in the two USB inputs, already tested pen-drive (it turns on a led) but not the data only the USB drawing , air mouse remote control nothing happens, usb wired mouse does not work, thought it had burned, but the two USB inputs have power, what do I do ??? I've tried to factory reset both recovery and Android settings, and still don't recognize any USB plugged in Box, I'm thinking of flashing this rootless 4 / 32gb rom to see if the USB inputs work again, what do you think????

[Nigel]

Since yesterday my HK1 Play has red stripes on the image, I already installed this 4GB rom without root and the 2 problems continue (USB does not load data and red stripes on the image), can anyone help me, I do not know what else to do.

 

[Nigel]

Here the link for the 4/32, 64 or 128GB version (rooted): https://mega.nz/#!dUFVAA6L!idEPGZNo6...TiDE2-VerQB0VY

[AuXiLiAtOr]

Unbrick and Flash every ROCKSHIT ! Box (Maskrom)

Here it is: https://streamable.com/8ho9e

https://mega.nz/fm/ZdoHTQgT

AndroidTool_Release_v2.51

Enjoy ^^