April Firmware 2018-04-09 for Regular and L.P. memory - Untested

[ReaperMan]

Posted on 4pda forums and untested

https://4pda.ru/forum/index.php?showtopic=764777&view=findpost&p=72217236

Any Flash is a risk..so beware ...or tweak it till you break it.

[trebor]

H96 -pro
Amlogic / q9377 / q9377: 7.1.2 / NHG47L / 20180409: user / test-keys
ATTENTION! All that you do with your box, you do at your own peril and risk!

Firmware for boxes with ordinary memory:
aml_7.1_s912_q9377-S912_mac-20180409 - FEX
aml_7.1_s912_q9377-S912-XGO_mac-20180409 - FEX

Firmware for boxes with LP memory:
aml_7.1_s912_q9377-S912_LP_mac-20180409 - FEX
aml_7.1_s912_q9377-S912-XGO_LP_mac -20180409 - FEX

[tyrol_gangster]

does anyone know whether this includes the fixed u-boot?

[brenas25]

Anybody tested?

[Shonk]

The wallpaper service is finally working
so android launchers work now

[yurimcz]

Does it work on wisdom version, green pcb (zh01-v3.0)?

[imaddiced2u]

Just tried aml_7.1_s912_q9377-S912_mac-20180409 from SD card on Gearbest Wiadom board 2017-02-10 H96-S912-TVBOX(DDR4)-V0.2
First it showed Upgrading, after about a minute my TV showed "Check signal cable" I left it for 1 hour in case it was still upgrading...it wasn't...took out the SD card and tried to boot, nothing, no LED, no boot.
Tried to get back.
Was running aml_7.1_s912_q9377-S912_mac-20171206, with few errors and yesterday I installed the S912_H96_3G_DDR34_171120_MAC, this is Wisdom ROM, it gives some Bluetooth share and System UI errors at times. Also some apps are declare failed but click wait and they usually work right. Anyway, after burning SD cards with bot versions of ROM, they would each get to about 95% and stop, I figured I was now the owner of a brick.
I switched to the USB burning tool, version 2.0.8 with the new aml_7.1_s912_q9377-S912_mac-20180409 ... success and like Shonk said, wallpapers are working now. So far there have been no errors, standby from the remote works too but the remote won't turn on the box if it is shutdown, red light comes on, have to cycle power to boot it.
Finally, working good so far on this Wisdom board.

[SUSKY]

Does there H96 Pro+ installed those ROM and running well??
my H96 Pro+ 3G/32G Blub board, cannt flashing ...

[imaddiced2u]

Video quality seems to be improved in this ROM over previous versions that I've tried.

[quincydog]

Hi,
Does someone have a link for the firmware listed as Amlogic / q9377 / q9377: 7.1.2 / NHG47L / 20180409: user / test-keys , aml_7.1_s912_q9377-S912_mac-20180409 - FEX .
The link does not work!
Also where can I get a working TWRP for the " Wisdom" board?
I have tried a few using TWRP app to install but none worked for me.
Thanks.

[ch3mn3y]

You can use TWRP from superceleron's rom. It will work as rom memory seems to have same setup on all H96 Pro+ devices.
It can be taken from OTA's zip or here: https://mega.nz/#!Ji4iEAjI!5iCbS2F9J...cO6-MWb1b-z90I

[imaddiced2u]

Hi,
Does someone have a link for the firmware listed as Amlogic / q9377 / q9377: 7.1.2 / NHG47L / 20180409: user / test-keys , aml_7.1_s912_q9377-S912_mac-20180409 - FEX .
The link does not work!
Also where can I get a working TWRP for the " Wisdom" board?
I have tried a few using TWRP app to install but none worked for me.
Thanks.

Try here...

https://4pda.ru/forum/index.php?showtopic=764777&st=8800#entry72227172

[quincydog]

Try here...

https://4pda.ru/forum/index.php?showtopic=764777&st=8800#entry72227172

Thanks!

[soldiaz]

Flashing MAGISK ended in bootloop..

I own an H96 PRO 2/16 q9377. Cannot find firmware, best would be OTA since I won't loose userdata.

Do I have to care bout DDR types?

Can anyone point me to download place?

[ch3mn3y]

Flashing MAGISK ended in bootloop..

I own an H96 PRO 2/16 q9377. Cannot find firmware, best would be OTA since I won't loose userdata.

Do I have to care bout DDR types?

Can anyone point me to download place?

You have to check Your PCB (so open the Box). It's the only way to check what exactly Box You have. And firmwares are "different" for almost all PCBs (almost coz V5 and V6 are one, v2.2 and 2.3 are similar too).