Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

MX10 android box help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MX10 android box help

    i have MX10 4gb/64gb it has android 8.1 i want to downgrade to 7.1 noghat i got all driver and android on geekbuying 1st time it connected with factory tool 1.6 and it started upgrading when it goes 15% it failed after that my box just red light on nothing else no connected with computer i install alot of drivers but the factory tool not detect my box just red light on plz help me i am worried about my box because 2 month ago i bought it plz some one help me

    #2
    Hello,

    So the Factory Tool is not the right one to Burn these Box.
    You have to use Android Tool also you have to erase the Box incl. Bootloader before Downgrade.
    You can Download the Tool here: --> https://drive.google.com/file/d/16AQ...ew?usp=sharing

    Start the Tool connect your Box in Upgrade Mode an do the following:

    1.: Click on "Upgrade Firmware"
    2.: Click on "Firmware" and select your Android 7.1 Firmware
    3.: Now Click on "Erase Flash"

    After that your Device is in Mask Rom Mode

    4.: You can now Downgrade your Device with the Press on "Upgrade"

    That?s it.

    If it not Work proper then also connect the Power Cord after you put the Device in Upgrade Mode.

    Neomode

    Comment


      #3
      thank you for your response brother rk develpores tool also not detect my box its show no device found just red light on

      Comment


        #4
        Make sure you installed the right drivers or your computer will not detect the box at all.

        Comment


          #5
          i have installed driver Assistance 4.5 but not detect

          Comment


            #6
            no one help me

            Comment


              #7
              Hi mate try factory tools 1.39 and try driver assistance 4.3 and only use USB port 4
              here is the link
              http://chinagadgetsreviews.blogspot....-v139.html?m=1

              Have a look here for some firmware too
              https://chinagadgetsreviews.com/?s=Mx10

              Comment


                #8
                BROTHER I AM TRYING IT CONNECT WTH MASKROM
                BUTWHEN I PUSH UPGRADE IT GIVE MASSAGE DOWNLOAD BOOT FAIL
                WHAT IS THAT PROBLEM

                Comment


                  #9
                  Download this document and try from step 1 to the end it worked for my brother when he was in the same boat. If this doesn't work then I am lost mate.
                  also try a different USB port on your PC.

                  https://www.dropbox.com/s/yasfeo2koa...uide.docx?dl=0

                  Comment


                    #10
                    thank you all of u for helping me. i have attached and i did firmware but it still hang not working some time red light some time blue light i think firmware is not right
                    because my BOX MX10 4GB Ram and 64 gb rom
                    and dated

                    PASSD4-64G
                    2018/09/10

                    Comment


                      #11
                      I have the some problems..
                      but i have resoult...
                      For first you mush use firmware d4
                      http://geekbuying.mediafire.com/file...80528.img/file
                      (ddr4) e not r1 o r2...(ddr3)
                      And flash with use factory tool only entering in maskroom mode ...

                      Comment


                        #12
                        i have didi but its stuck on blue light

                        Comment

                        Working...
                        X