NEW - Lollipop - wasser firmware 3.0.6 for Minix Neo X7

[flhthemi]

henk32211, I'm pretty much a n00b like you are but I believe the only kernel available from wasser for this ROM is THIS one and it might not help your flicker issue but might be worth a try.

[henk32211]

I wouldn't. It's meant for the v2 series of Wasser ROMs (i.e. KitKat).

Oke thx can you tell me which kernel I need and how to do it
and many thx fore the support
greetings

[henk32211]

I use Windows 7 to do this. I don't know if Windows 10 can do it as I have never tried. So....

Download the finless ROM from HERE. Unzip it to a location of your choice. Delete the folders "Drivers" and "FinlessROM" you don't need them. Now you should have 6 items left in the "T428 4.4.2 Finless 2.0" folder.

Folder - Language
Folder - Log
File - config.cfg
File - config.ini
File - README FIRST.TXT
File - ROM_Flash_Tool_21.exe

You should have all the drivers installed on your PC so that when you connect your box the RKBatchTool.exe sees it. This is run just to confirm you have the drivers installed and they are working. You need to see that green box light up. If it does you're good to go with the ROM Flash Tool, so just close the tool if it identifies your device. If it doesn't you need to install the drivers and get them working so that it does.

Once you have it working open the ROM Flash Tool (I use ROM_Flash_Tool_21.exe).
You need to be on the "Download Image" tab.
Untick ALL the boxes.
Item #4 should be "KERNEL" at the end of that line (to the right of the path to the kernel) there is a blank box. Click inside it and load your desired kernel image using the pop up window.
Make sure after it loads it is correct and make sure the tick mark is showing.

At this point I don't know which of the 4 buttons to click Run, Switch, LowerFormat or Clear. *I* think it's Run but until someone who KNOWS (Molle maybe?) don't even think about doing anything because you might end up with a brick. We don't want that. So when someone with more knowledge than I comes along and gives us the answer I will edit this post and we'll move on. If I'm completely wrong I'll just edit this post and delete it all.

Thx fore the support fore now and waiting

[Molle]

try to install the kernel-neox7-wasser-cpu1800-ddr800-gpu798-hdmi_flicker

I wouldn't. It's meant for the v2 series of Wasser ROMs (i.e. KitKat).

[flhthemi]

Hi I have install the 3.06 and works but now I have every few sec a screen flicker
try to install the kernel-neox7-wasser-cpu1800-ddr800-gpu798-hdmi_flicker but I can"t load the file (load firmware failed ) white all kernel files am using RB batch 1.7 and 1.8
Can anyone help me pls
greeting

I use Windows 7 to do this. I don't know if Windows 10 can do it as I have never tried. So....

Download the finless ROM from HERE. Unzip it to a location of your choice. Delete the folders "Drivers" and "FinlessROM" you don't need them. Now you should have 6 items left in the "T428 4.4.2 Finless 2.0" folder.

Folder - Language
Folder - Log
File - config.cfg
File - config.ini
File - README FIRST.TXT
File - ROM_Flash_Tool_21.exe

You should have all the drivers installed on your PC so that when you connect your box the RKBatchTool.exe sees it. This is run just to confirm you have the drivers installed and they are working. You need to see that green box light up. If it does you're good to go with the ROM Flash Tool, so just close the tool if it identifies your device. If it doesn't you need to install the drivers and get them working so that it does.

Once you have it working open the ROM Flash Tool (I use ROM_Flash_Tool_21.exe).
You need to be on the "Download Image" tab.
Untick ALL the boxes.
Item #4 should be "KERNEL" at the end of that line (to the right of the path to the kernel) there is a blank box. Click inside it and load your desired kernel image using the pop up window.
Make sure after it loads it is correct and make sure the tick mark is showing.

At this point I don't know which of the 4 buttons to click Run, Switch, LowerFormat or Clear. *I* think it's Run but until someone who KNOWS (Molle maybe?) don't even think about doing anything because you might end up with a brick. We don't want that. So when someone with more knowledge than I comes along and gives us the answer I will edit this post and we'll move on. If I'm completely wrong I'll just edit this post and delete it all.

[henk32211]

Hi I have install the 3.06 and works but now I have every few sec a screen flicker
try to install the kernel-neox7-wasser-cpu1800-ddr800-gpu798-hdmi_flicker but I can"t load the file (load firmware failed ) white all kernel files am using RB batch 1.7 and 1.8
Can anyone help me pls
greeting

[Molle]

Hey Molle, if I flash the 1800 kernal do I lose any data?

No, you won't ... provided that you follow the correct procedure.

[flhthemi]

Ah..but will there be a 3.07?

Hey Molle, if I flash the 1800 kernal do I lose any data? I'm using this ROM on a Ugoos UT2 and it's a little laggy and I'm thinking it might help.

[Molle]

Thinking of installing it, when upgrading from 3.0.6 to future 3.0.7 would my data be lost?

Yes, the batch installer will wipe everything (except stuff on an external SD). With "Titanium Backup" and "ROM Settings Backup" you can get most of your apps&settings transferred to the new ROM.

[goodoane]

It may be lost but you can do a titanium backup.

[enboig]

Thinking of installing it, when upgrading from 3.0.6 to future 3.0.7 would my data be lost?

Thanks

[Pluto]

So, long shot here.... Was stagefright patched in the lollipop update? Curious to know. Can someone scan and let me know?

Anyways, thanks for the update Wasser, you made this box awesome from day 1!

Looks good, i noticed that it has a security patch level of 03/2016, which is more then fair enough i guess.

[Cantenna]

So, long shot here.... Was stagefright patched in the lollipop update? Curious to know. Can someone scan and let me know?

Anyways, thanks for the update Wasser, you made this box awesome from day 1!

[nayef]

we need fix app for v3.0.6
- AirPin Pro 3.3.3 Minix not connected for other device
-app RKRemoteControl not see Minix ... i think need something for "ehome media center "
- when use micracast app = restart system

also default remote minix x7 not work

[EagleEyeXZ]

Wasser is this rom still in dev or is this it? It was allready cool that you tried to create a lollipop rom in the first place