Android 4.2.2 for Measy U4K

[Marginal]

Hey Dee!

Good news! I'm in. Please use the stock fw CS918S dowloadable here
http://www.mediafire.com/download/eh..._20131202_.rar

Hello.

I downloaded the FW, but it asks for a password in order to be able to unrar.

Thanks.

[d33]

Android 4.2.2 for Measy U4K

That's the stock firmware! Download from temp link in first post


Sent from my iPhone using Tapatalk

[ADD]

This is the stock fw for cs918s. If you flash this on u4k you'll have no wifi/bt. Use the link in the end of the first post instead.

[Marginal]

Stick does not connect ...

Hello.

One last question (I hope :-) ).
When I try to upgrade, the stick gets connected for a couple of seconds and then disconnects.
On the driver installation window there's a message:
"MTP USB Device

Device Unplugged"
Presently on the U4K I have the 4.2.2. with no WiFI.

Thanks :-).

[ADD]

Hello.

One last question (I hope :-) ).
When I try to upgrade, the stick gets connected for a couple of seconds and then disconnects.
On the driver installation window there's a message:
"MTP USB Device

Device Unplugged"
Presently on the U4K I have the 4.2.2. with no WiFI.

Thanks :-).

Shorten the pins and connect to pc. Then release pins. You should hear the windows sound that the divice was recognised. Only then Phoenix starts flashing. So, prior to connecting first thing to do is to browse to the firmware file.

[Marginal]

The steps are:
1. Power off the Measy U4K
2. Put the fw on sdcard or load fw with PhoenyxSuit;
3. Short the pins and power on through computer USB where Phoenixsuit is installed.
4. Release the pins.
5. The update will start automatically.

I hope you understand.

Please tell me how much memory report your Measy U4K?

Thank you all :-).
It says 2 GB internal memory ...

Regards.

[d33]

Android 4.2.2 for Measy U4K

To get a true picture of storage usage you need to use df at the command line


Sent from my iPhone using Tapatalk

[Marginal]

No more WiFI ...

WiFi went dead ...

[ADD]

WiFi went dead ...

Just reboot.

[Marginal]

Just reboot.

I did, it works and then same thing happens.
Is it me, or this is a bug?

Thanks.

[ADD]

Must be your router then. Try to play with channels. Then change the bandwith to 20 instead of 40. Usually it's more stable.

[Marginal]

Must be your router then. Try to play with channels. Then change the bandwith to 20 instead of 40. Usually it's more stable.

I will.

The strangest thing is, I have changed nothing in my router's settings, and before the FW upgrade I had no such problem.

Thanks.

Both my 2.4 & 5 GHz settings were @ 40 MHz ...

[d33]

Can some one repost the Rom please. Want to install it on my CS918S.The original link does not work.

I've updated the link on the OP.

[d33]

Android 4.2.2 for Measy U4K

Did you see there is an update to the latest stock firmware cor CS918S?

Check the title - this is U4K


Sent from my iPhone using Tapatalk

[supastar33]

I've updated the link on the OP.

Thank you d33!