Mk908 v5 (netxeon) cant boot in flash mode ...

[spzjulien]

i just receive my Mk908 v5 and when i connect otg to pc usb, it power up and boot, but not detected on windows, even if push the reset button then connect OTG to pc, no windows Bong and the device boot normally ...

im very lost now ... any idea ?

[JDfense]

Have you installed the Rockship driver for your windows version?

JDfense

[spzjulien]

Have you installed the Rockship driver for your windows version?

JDfense

the device never bump on window, so never show on device manager, even using manual mode with reset button .....

[JDfense]

What happens when you set your device in loader mode for flashing. No question for drivers?

JDfense --->I8160

[spzjulien]

What happens when you set your device in loader mode for flashing. No question for drivers?

JDfense --->I8160

what is loader mode ? flash mode u mean ?

it never ask me driver, and never show in device manager ....

[JDfense]

Is this your device?

http://www.geekbuying.com/item/Tronsmart-MK908-Google-Android-4-1-Mini-PC-TV-Box-RK3188-Quad-Core-2G-8G-BT-Black-315155.html

Loader mode means your device is ready for flashing a ROM. Does your stick has any button or reset hole or any description to flash a firmware?

JDfense

[spzjulien]

here is pic of my device

[spzjulien]

ok i found how ...

on setting, i found 'device' then USB then connect to Pc ... i clic it and finally found the MK908 on device manager in win7

i did not have to install driver, since i allready flahs my Pipo U8 ....

i flashed finless 1.7 without any trouble, but the reset boutton still not working for entering into flash mode, no big deal but strange

[JDfense]

Fine. As long you can boot your mk908 complete, you can switch your TV-Stick into loader, but if not... you will need the reset button. Maybe you can use the reset button for sure, when your stick is open.
Anyway, have fun with your mk908.:-.)

JDfense --->I8160

[spzjulien]

Fine. As long you can boot your mk908 complete, you can switch your TV-Stick into loader, but if not... you will need the reset button. Maybe you can use the reset button for sure, when your stick is open.
Anyway, have fun with your mk908.:-.)

JDfense --->I8160

i try this dam reset button even stick open, but never worked to boot into loader .... allways boot in normal mode
maybe the button is dead, i will try to check with my tester ...

[JDfense]

When the button reset your device, it works fine.
Try holding the button while you plug your stick over otg usb to your pc or plug your stick over otg to pc at first. Then press button for a few seconds.
One of those two methods should bring your stick into the loader mode.

JDfense ----> Nexus 7 ~ 2013

[FadeFx]

AW: Mk908 v5 (netxeon) cant boot in flash mode ...

Also be sure that your device us powered off before pushing the button.

_________________________
tapatalked from GalaxyS3

[Mengele]

netxeon v5

Hello.
I have the same mk908 v5

what stock firmware 4.4 1080p did you put?
Thanks.



[/QUOTE]