NEW - MK908 Finless 1.8 ROM

[spinman]

Just read a page or two before posting next time. There is a solution for you.

tapatalked from i9300

Sorry I used search function but it didn't return any answer.

Thank you for your response, I'm going to try this now.


Edit : It's OK, thanks for the advice

[FadeFx]

AW: NEW - MK908 Finless 1.8 ROM

I've got a problem with this Rom.
I successfully installed it after a few hard days but it's allright, this rom is really greater than the stock rom.

I installed OpenVPN connect but the MK908 crashes when the VPN tries to connect to a server.
With OpenVPN, the MK908 freezes.

Does anyone has a solution please ?

Thanks

Just read a page or two before posting next time. There is a solution for you.

tapatalked from i9300

[spinman]

Vpn connection impossible

I've got a problem with this Rom.
I successfully installed it after a few hard days but it's allright, this rom is really greater than the stock rom.

I installed OpenVPN connect but the MK908 crashes when the VPN tries to connect to a server.
With OpenVPN, the MK908 freezes.

Does anyone has a solution please ?

Thanks

[pesanet]

Thank you, actually I meant the language settings on Android

[malfrat]

hi

why isn't there estonian language support?


--Andris

originaly i'm french speaker. english language i use as the universal business language, a way to support and join the overall best possible range of users. as you i have to practice a lot my english that could not be wrong personnaly... oherwise, if we use all possile language at same time on a forum, we will probably be on google translate site than freaktab.com oterwise we could provide very helpfull and great support such as general help, custom rom made by awsome if not best developper of the scene comparate to factory one most of case.. and friendly helpful users

Best friendly regards to estonians from freaktab members

[pesanet]

estonian

hi

why isn't there estonian language support?


--Andris

[pulsar]

Yes actually coming from KK back to JB is a problem. I brick my device EVERY TIME!

You have to put it in MASK ROM mode by shorting NAND pins. It's because of the loader.
PAIN in the ass but fact. The loader will not downgrade without MASK ROM mode

Bob

I also keep getting download image failed but I'm coming from stock JB rom. How can this happen?

[Sarunaszx]

can we expect to have 4.4 kit kat on mk 908 ? Or tronsmart has forgoten about it?

[FadeFx]

AW: NEW - MK908 Finless 1.8 ROM

Do not add the .sh file extension to init.d scripts or they wont work.

Bob

Thanx

tapatalked from i9300

[malfrat]

QUOTE=Finless;186703]Do not add the .sh file extension to init.d scripts or they wont work.

Bob[/QUOTE]

hi Bob, by the way... it seems mk908v3 and mk908v5 use efuses on the rk3188. default v5 kernel does several things depending on the rk3188 efuse. It takes the leakage level from the efuse for dvfs and tells cpufreq (if rk_tflag==true) to delete any value higher than 1416. latest cnx kitkat firmware also uses a efuse.c file but with references to rk3066 instead of 3188. efuses.c does not exist in the mk908V1 sdk leak. That file is used by dvfs.c and I think that the efuses for the V3 and V5 are different. exact same kernel and system image on the V5 goes up to 1.4ghz and on the V3 it goes to 1.6

can someone rebuild that beast with rk_tflag==false ( tflag is trottle cpu no doubt) and tweak appropriate mv voltage to run a v5 board at 1.6ghz at least?

i'll be an asssiduate tester for that

Please Bob
thx for this good 1.8 rom

[Finless]

Do not add the .sh file extension to init.d scripts or they wont work.

Bob

[malfrat]

It should be /system/etc/init.d/100_tun.sh

The number in fron isnt necessary, but makes it easier to have run order sorting.

tapatalked from i9300

You should probably right, i've never use init.d but was pretty close toknow how to setup scripts

Thx for help users

[FadeFx]

Re: NEW - MK908 Finless 1.8 ROM

i'm really happy for that it work now. hummm now you'll probably need a init.d script that load the module at boot. Finless should have install the init.d support in the rom. look at system/etc/ if init.d folder is there.if so, you can now put in tha folder a .sh file script that you have to make. the script file must at least have rwx-rx-rx (755) permissions to be allow to run and load during the boot....

Autoload module on bootin terminal type:

su
mount -o remount,rw /system

Create an init file e.g. /system/etc/init.d/tun with this content: insmod /system/lib/modules/tun.ko

//Change ownership and permissions

chown root:shell /system/etc/init.d/tun
chmod 750 /system/etc/init.d/tun
mount -o remount,ro /system

Reboot the box and execute lsmod to check if you see the tun module.
if doesn't work rename the tun file in tun.sh and sset permision like above
that work now?

It should be /system/etc/init.d/100_tun.sh

The number in fron isnt necessary, but makes it easier to have run order sorting.

tapatalked from i9300

[malfrat]

Thanks. I tried it last night - insmod failed because the module was already installed. I used ES Explorer to navigate to the /system/lib/modules folder and removed the file. I then ran the TUN.ko installer app and it downloaded a compatible TUN.ko module to /sdcard. I copied this file to /system/lib/modules and restarted. The new TUN.ko module did not start automatically, but did start manually with kocontrol. After checking the box and enabling 'Set on boot', I rebooted, but the module did not load automatically on restart. So it works fine with OpenVPN as long as I load the module manually first. Is there a config file I can edit to have it start up normally just like the one that is included with the firmware?
PS. I will try and upload the working .ko module on the weekend.

i'm really happy for that it work now. hummm now you'll probably need a init.d script that load the module at boot. Finless should have install the init.d support in the rom. look at system/etc/ if init.d folder is there.if so, you can now put in tha folder a .sh file script that you have to make. the script file must at least have rwx-rx-rx (755) permissions to be allow to run and load during the boot....

Autoload module on bootin terminal type:

su
mount -o remount,rw /system

Create an init file e.g. /system/etc/init.d/tun with this content: insmod /system/lib/modules/tun.ko

//Change ownership and permissions

chown root:shell /system/etc/init.d/tun
chmod 750 /system/etc/init.d/tun
mount -o remount,ro /system

Reboot the box and execute lsmod to check if you see the tun module.
if doesn't work rename the tun file in tun.sh and sset permision like above
that work now?

[DigiDAD]

In quick terminal app type:

insmod /system/lib/modules/tun.ko

Then click run as root tab(supersu will ask to grant root privilege to terminal and allow that) and post what you get
Double try to be sure, once quick terminal have root privilege

Kmod app from maxter allow to load modules too but kocontrol app is better, give a try you could set modules to load at boot...

Thanks. I tried it last night - insmod failed because the module was already installed. I used ES Explorer to navigate to the /system/lib/modules folder and removed the file. I then ran the TUN.ko installer app and it downloaded a compatible TUN.ko module to /sdcard. I copied this file to /system/lib/modules and restarted. The new TUN.ko module did not start automatically, but did start manually with kocontrol. After checking the box and enabling 'Set on boot', I rebooted, but the module did not load automatically on restart. So it works fine with OpenVPN as long as I load the module manually first. Is there a config file I can edit to have it start up normally just like the one that is included with the firmware?

PS. I will try and upload the working .ko module on the weekend.