CWR & CM9-AOKP compatibility.zip

[[email protected]]

Could someone please clarify? The OP says for 702c only, yet CincyDad reports flashing CM9 on the 7XC. Do the files from the OP work on the 7XC, which has the Allwinner 13? I have the 7XC. I did check at my local BigLots, but they don't seem to have any Polaroid tabs at all. They now have the Next tablet, which others have said isn't as good.) Thanks for any light anyone can shed.

Sally

I"ll download the live suite firmware for that device over the weekend extract and see what the differences are, ive been told that the 702c and 703c are the same device but cant confirm or or verify nor can i verify that the 7XC is either. If cincydad wants to contact me im in cincinnati maybe he'd let me take a peak at his device at a barnes and noble or something. regardless i should be able to do the samething i did for the 702c.

[sabercatpuck]

If you check these two threads

You will see that at least the motherboard of the 7XC and the PMID702C are the same. There may be other perherphial differences but at least the bulk of it is the same.

http://www.freaktab.com/showthread.php?1153-Gut-shots-from-my-PTAB7XC

http://www.freaktab.com/showthread.php?1145-PMID702C-photoshoot

[sabercatpuck]

Good email chain on the subject

There are good suggestions in this email chain about things that can be done while troubleshooting failed installations for newb's like myself. This is where I got the link I posted above, but it has expanded it's scope into the troubleshooting realm so thought I would include it.

http://comments.gmane.org/gmane.comp.hardware.netbook.arm/3755

[Cincy Dad]

I'm running 702C firmware

I'm currently running the original firmware for the 702C on my 7XC and I haven't found any issues other than the lack of GPS (which is the same for the 702C). I might take another crack at the CM9 rom this coming week and I'll keep everyone posted on how it works.

[[email protected]]

jelly bean

CM10 Jelly Bean Compatibility and Installation Guide.......

CM10 Installation

http://www.freaktab.com/showthread.php?1496-Polaroid-PMID702c-amp-PMIC703-CM10-Jelly-Bean-Compatibility

[HHJANOAP]

William I have a question,

Is it safe to try and flash this rom on a MIDC700 7" after I back up the original rom using recovery?
The stock rom for my tablet isn't very good or optimized..

[[email protected]]

William I have a question,

Is it safe to try and flash this rom on a MIDC700 7" after I back up the original rom using recovery?
The stock rom for my tablet isn't very good or optimized..

My compatibility zip wont work I believe the 701 series is an A10 device and my compatibility is for A13 based devices. With that said if your familure with how to use livesuite to restore the factory firmware I would try just installing his rom as it was designed for A10 devices it might boot might not boot, some things might work or might not work, but if it messes up you can use livesuite to go back to factory and start again. If your willing to wait the weekend I'm in the process of downloading the firmware for the severial 701 series devices to see if I can use the same process I used to make mine to build one for them though I wont have a device to test with it will be up to you all with those devices to let me know what is working or not working. If anyone in the Cincinnati Ohio area has any of these devices and are willing to meet out at a coffee shop.or something it would be a real help in making a compatibility zip for them, feel free to msg me if your in Cincinnati and willing to assist with trials.

[HHJANOAP]

My compatibility zip wont work I believe the 701 series is an A10 device and my compatibility is for A13 based devices. With that said if your familure with how to use livesuite to restore the factory firmware I would try just installing his rom as it was designed for A10 devices it might boot might not boot, some things might work or might not work, but if it messes up you can use livesuite to go back to factory and start again. If your willing to wait the weekend I'm in the process of downloading the firmware for the severial 701 series devices to see if I can use the same process I used to make mine to build one for them though I wont have a device to test with it will be up to you all with those devices to let me know what is working or not working. If anyone in the Cincinnati Ohio area has any of these devices and are willing to meet out at a coffee shop.or something it would be a real help in making a compatibility zip for them, feel free to msg me if your in Cincinnati and willing to assist with trials.

Thanks for the reply, I've flashed Android phones before.. But so far I've been unable to get a hold of the stock rom. Polaroid doesn't have it on they're web site either, is there any method to make one my self? I don't see any one out of Europe though who owns the MIDC700PR - the US white line series look different too. If you need a tester once I get the stock rom I would gladly help.

[rusty2788]

My compatibility zip wont work I believe the 701 series is an A10 device and my compatibility is for A13 based devices. With that said if your familure with how to use livesuite to restore the factory firmware I would try just installing his rom as it was designed for A10 devices it might boot might not boot, some things might work or might not work, but if it messes up you can use livesuite to go back to factory and start again. If your willing to wait the weekend I'm in the process of downloading the firmware for the severial 701 series devices to see if I can use the same process I used to make mine to build one for them though I wont have a device to test with it will be up to you all with those devices to let me know what is working or not working. If anyone in the Cincinnati Ohio area has any of these devices and are willing to meet out at a coffee shop.or something it would be a real help in making a compatibility zip for them, feel free to msg me if your in Cincinnati and willing to assist with trials.

hey i would be up to testing this. i have a 701c and a701i .the 701i is all ready on the cm10 rom running
the momo zip but no rotation and has memory problems but still better then stock

[jtintle]

hey i would be up to testing this. i have a 701c and a701i .the 701i is all ready on the cm10 rom running
the momo zip but no rotation and has memory problems but still better then stock

Same here...glad I tried it out, bet CM9 would work also with the MOMO9 zip, for the 701c or i
just with the same problems with no rotating screen, and some hardware buttons messed up...

[[email protected]]

POLAROID PMID701 series CM9, AOKP, CM10

CM9 / AOKP / CM10 compatibility trials see link below:

http://www.freaktab.com/showthread.php?1543-Polariod-PMID701i-PMID701i_10-PMID701_x10-PMID701c-CM9-AOKP-CM10-compatibility

[[email protected]]

hey i would be up to testing this. i have a 701c and a701i .the 701i is all ready on the cm10 rom running
the momo zip but no rotation and has memory problems but still better then stock

CM9 / AOKP / CM10 compatibility trials see link below:

http://www.freaktab.com/showthread.php?1543-Polariod-PMID701i-PMID701i_10-PMID701_x10-PMID701c-CM9-AOKP-CM10-compatibility

[[email protected]]

Same here...glad I tried it out, bet CM9 would work also with the MOMO9 zip, for the 701c or i
just with the same problems with no rotating screen, and some hardware buttons messed up...

CM9 / AOKP / CM10 compatibility trials see link below:

http://www.freaktab.com/showthread.php?1543-Polariod-PMID701i-PMID701i_10-PMID701_x10-PMID701c-CM9-AOKP-CM10-compatibility

[[email protected]]

No new compatibility zips will be posted until Monday, i was hoping to post one for the 4311 and a fix for the 701iX13 TS before then but i really need to focus on cleaning up my bases. With that being said, along with cleaning up the base files ill be cleaning up my Google Drive structure, and starting a new thread to house all them under. so keep a look out Monday 9/24/12 for the new thread, and yes for those wanting to know CM9 and AOKP compatibility ZIPS will be posted for 4311 and 701 series then too.

[[email protected]]

No new compatibility zips will be posted until Monday, i was hoping to post one for the 4311 and a fix for the 701iX13 TS before then but i really need to focus on cleaning up my bases. With that being said, along with cleaning up the base files ill be cleaning up my Google Drive structure, and starting a new thread to house all them under. so keep a look out Monday 9/24/12 for the new thread, and yes for those wanting to know CM9 and AOKP compatibility ZIPS will be posted for 4311 and 701 series then too.

new compatibility zips will not be posted now until Wednesday evening at the earliest now, i'm really sorry, i forgot my thumb drive at work Friday, so i built them based on my notes and put them on my sdcard on my tablet, sadly i messed up and formatted my sdcard by mistake so i have to redo them again.

it seems that allwinner development has come to a end for now from the community so with this last set of zips i hope to add support for all the Allwinner: Cyanogen and AOKP based roms i know of. (hopefully some manufacture will release an official jellybean firmware so incomplete proprietary files can be charry picked and maybe interest dev to some more building.

so as of now it looks like on the list for support is.

Christian Troys: CM9, AOKP, CM10
Quarx2k CM9, CM10
Cyanbook V0.4
Kangbook
Cyanbook_JB

if you know of any other CM or AOKP allwinner based roms to look at let me know, again sorry for the delay on these compatibility zips.