Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Vega S89 elite AV output Issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vega S89 elite AV output Issue

    Has any one been able to get any video and audio to play from the external AV output jack. I have the 1.6 ROM loaded otherwise plays nice with the HDMI.

    #2
    Originally posted by summer View Post
    Has any one been able to get any video and audio to play from the external AV output jack. I have the 1.6 ROM loaded otherwise plays nice with the HDMI.
    I have the same problem with my unit the hdmi works fine on my flat screens via hdmi but when i used the av cable on a crt tv i get picture but it scrolls by and i cant get it to stop scrolling.

    Comment


      #3
      make sure you guys connect to the av port in TV, not the RGB port, i make a mistake when i first use the av , and in the end, i find i correct to the wrong port in TV. and change it, problem solved.

      Eric
      Looking for developers
      http://freaktab.com/forum/advertiser...91j-smartphone

      Comment


        #4
        Originally posted by geekbuying View Post
        make sure you guys connect to the av port in TV, not the RGB port, i make a mistake when i first use the av , and in the end, i find i correct to the wrong port in TV. and change it, problem solved.

        Eric
        Don't forget to disconnect your HDMI cable, and reboot with only AV cable connected should work.

        Comment


          #5
          Where can I setup the a/v ?
          At
          [Settings] -> [Display]
          I only find HDMI, and at
          [Settings] -> [Other] -> [More Settings] -> [DEVICE / Display]
          also nothing about a/v ???

          BTW: only one at time possible? No HDMI and a/v?
          RK3288 Devices
          - Overview BOX (LINK !)
          - Overview STICK (Dongle) (LINK !)

          MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
          UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
          Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
          Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

          RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
          Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

          Comment


            #6
            Furthermore, uncheck automatic HDMI detection and set HDMI-576 or a lower mode. Make sure that you diconnect any HDMI cable from the box itself. I guess there is a small switch inside the HDMI connector that inhibits the AV output when a HDMI cable ic connected to it. Do a full reset and everything should work fine, the menu entries will be shown if AV out is active.

            Comment


              #7
              PS:

              Ok only HDMI or a/v but not 'and'...
              My TV shows that he recognise 'CVBS 576i' but only shows on screen like 480 so I lost a lot of... but if I switch at [Settings] -> [Display] to 480cvbs the screen nearly fits ...
              RK3288 Devices
              - Overview BOX (LINK !)
              - Overview STICK (Dongle) (LINK !)

              MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
              UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
              Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
              Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

              RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
              Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

              Comment


                #8
                Note,
                You Might find another bug..

                When using xbmc.. Playing a vid with a bigger resolution then screen
                Then xbmc doesn't resize the vid to match the borders of your screen ( aka..most of the vid is off screen playing)

                Or
                If you set.. Letter size to big in android, apps will start playing 90degrees

                Note: use the a/v cable that came with the unit, others don't seem to work

                Anyway..

                Comment

                Working...
                X