R89-Android OS / Launcher / UI.... issues - feedback here

[no_spam_for_me]

WiFi static IP

What I'm missing at WiFi is the possibility to enter a static IP...
And also missing the information about Sub-net, DNS and GW....

EDIT:
OK, I find out, that's only missing at "unsecured" WiFi's
At that moment I use a "secured" WiFi I have to enter the key and there I can also check "Show advanced options"... BUT not at "unsecured" WiFi's because it automatically connect at that moment I select it and so no way to handle the IP

[oman]

I have an input issue. When I type on a wireless keyboard or an airmouse almost always the letters stick and it types the same letter continuously like I have my finger pressed on the button for a long time

I test RII Mini i25,dont find the issue...which airmouse you used?

If I turn on wifi internetsharing Beelink re boots after a while.

Location services are not available on the r89. Does anyone else have the same problem? Also it says that i dont have space even though i have installed only7-8 apps

Will check them,thx.

[convict]

I test RII Mini i25,dont find the issue...which airmouse you used?





Will check them,thx.

I used the melee f10, mele f10 deluxe and Microsoft desktop 800 wireless keyboard mouse combo

EDIT: After a factory reset everything works fine for the moment

[clarkss12]

hardware keyboard default

With the 109k4 ROM, the hardware keyboard is the default input setting. I turn it off in the settings, but after a reboot, it comes right back.

[oman]

With the 109k4 ROM, the hardware keyboard is the default input setting. I turn it off in the settings, but after a reboot, it comes right back.

Okey,I will check it.

[Arbelzapf]

I have also noticed this.

[no_spam_for_me]

BTW:
I don't really need it so I don't really miss it, but I recognized, that at my TV I only get
1920x1080p-60
1920x1080p-50
but not also
1920x1080p-30
1920x1080p-25
or
1920x1080p-24
And I know that my TV is able to handle 1920x1080p-24 or 25 because I remember that I had tried it at amlogic (x8-h) but don't use it because of stuttering mouse pointer...
(ATI at NB say 25 and 30 but both output doesn't work (no signal) )

Which log at which moment do you need (if you want to have it)?

EDIT:
My SAT-Receiver can handle -> TV show
23 -> 24
24 -> 24
25 -> 25
29 -> 30
30 -> 30
50 -> 50

[oman]

BTW:
I don't really need it so I don't really miss it, but I recognized, that at my TV I only get
1920x1080p-60
1920x1080p-50
but not also
1920x1080p-30
1920x1080p-25
or
1920x1080p-24
And I know that my TV is able to handle 1920x1080p-24 or 25 because I remember that I had tried it at amlogic (x8-h) but don't use it because of stuttering mouse pointer...
(ATI at NB say 25 and 30 but both output doesn't work (no signal) )

Which log at which moment do you need (if you want to have it)?

EDIT:
My SAT-Receiver can handle -> TV show
23 -> 24
24 -> 24
25 -> 25
29 -> 30
30 -> 30
50 -> 50

The whole process by Syslog

[no_spam_for_me]

switch TV to the HDMI-port, then power on R89, go to settings->Display->HDMI-Mode
and then I got the dmesg and the logcat...

[stb2xxx]

I cheng to 1080p24hz after restrat back to 1080p60hz???

[oman]

switch TV to the HDMI-port, then power on R89, go to settings->Display->HDMI-Mode
and then I got the dmesg and the logcat...

You can see from dmesg.log:

<4>[    1.744309] ******** Show Sink Info ********

<4>[    1.744319] Max tmds clk is 0


<4>[    1.744324] Support video mode: 


<4>[    1.744329] 	1920x1080p@60Hz


<4>[    1.744333] 	1920x1080p@50Hz


<4>[    1.744338] 	1280x720p@60Hz


<4>[    1.744342] 	1280x720p@50Hz


<4>[    1.744346] 	720x576p@50Hz


<4>[    1.744350] 	720x480p@60Hz


<4>[    1.744355] Support video color mode: 


<4>[    1.744359] 	RGB


<4>[    1.744363] 	YCbCr422


<4>[    1.744367] 	YCbCr444


<4>[    1.744372] Support video color depth: 


<4>[    1.744376] 	24bit


<4>[    1.744380] Support audio type: 


<4>[    1.744385] 	AC3


<4>[    1.744389] Support max audio channel is 6


<4>[    1.744394] Support audio sample rate: 


<4>[    1.744398] 	32000


<4>[    1.744402] 	44100


<4>[    1.744406] 	48000


<4>[    1.744410] Support audio word lenght: 


<4>[    1.744414] 	16bit


<4>[    1.744418] 	20bit


<4>[    1.744422] 	24bit


<4>[    1.744426] 


<4>[    1.744429] 	LPCM


<4>[    1.744433] Support max audio channel is 2


<4>[    1.744438] Support audio sample rate: 


<4>[    1.744442] 	32000


<4>[    1.744446] 	44100


<4>[    1.744450] 	48000


<4>[    1.744453] Support audio word lenght: 


<4>[    1.744458] 	16bit


<4>[    1.744461] 	20bit


<4>[    1.744465] 	24bit


<4>[    1.744469] 


<4>[    1.744473] ******** Show Sink Info ********

[no_spam_for_me]

init.d / NFS

It's not an issue but a wish
- init.d
- nfs

I think init.d isn't a problem to realise hand-made by my self, but it seem that nfs is missing at the kernel, because I get this:

root@rk3288:/ # mount -o rw,remount /
mount -o rw,remount /
root@rk3288:/ # mkdir /mnt/XPFilme
mkdir /mnt/XPFilme
root@rk3288:/ # busybox mount -t nfs 192.168.2.1:/XPFilme /mnt/XPFilme -o ro,intr,soft,udp,nolock,rsize=8192,wsize=8192
2.1:/XPFilme /mnt/XPFilme -o ro,intr,soft,udp,nolock,rsize=8192,wsize=8192    <
mount: mounting 192.168.2.1:/XPFilme on /mnt/XPFilme failed: No such device

But wondering in that I can see it at the 'haneWIN NFS Server' at [Mounts] (the box IP) so it seems that a part/little bit of the connecting process is working???

[no_spam_for_me]

You can see from dmesg.log:
...

Yes I know, but I ask my self why? Because of the tests with the SAT receiver I know the TV can also handle 24/25/30 (and it shows me that I remember correct that at s802 (don't own it any longer) the 24 works) ...

I try to force it

echo "1920x1080p-24" > /sys/class/display/display0.HDMI/mode

but it doesn't work because the old knowing/working value is still at the file (e.g. 1920x1080p-50 or 1920x1080p-60)....

[almirus]

Please expand this zone (touch zone for change desktop)

[oman]

It's not an issue but a wish
- init.d
- nfs

I think init.d isn't a problem to realise hand-made by my self, but it seem that nfs is missing at the kernel, because I get this:

root@rk3288:/ # mount -o rw,remount /
mount -o rw,remount /
root@rk3288:/ # mkdir /mnt/XPFilme
mkdir /mnt/XPFilme
root@rk3288:/ # busybox mount -t nfs 192.168.2.1:/XPFilme /mnt/XPFilme -o ro,intr,soft,udp,nolock,rsize=8192,wsize=8192
2.1:/XPFilme /mnt/XPFilme -o ro,intr,soft,udp,nolock,rsize=8192,wsize=8192    <
mount: mounting 192.168.2.1:/XPFilme on /mnt/XPFilme failed: No such device

But wondering in that I can see it at the 'haneWIN NFS Server' at [Mounts] (the box IP) so it seems that a part/little bit of the connecting process is working???

Ok,I see.

Yes I know, but I ask my self why? Because of the tests with the SAT receiver I know the TV can also handle 24/25/30 (and it shows me that I remember correct that at s802 (don't own it any longer) the 24 works) ...

I try to force it

echo "1920x1080p-24" > /sys/class/display/display0.HDMI/mode

but it doesn't work because the old knowing/working value is still at the file (e.g. 1920x1080p-50 or 1920x1080p-60)....

Honestly,I dont know why.

If it cant find the HDMI 24/25Hz node,no such resolution can be out to display.