Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

HELP!!!!!

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #1

    HELP!!!!!

    Hi,

    I have looked around but didn't see a solution. I have a 4K android box from tinydeal.com and no matter what I have tried that I read on here. I cannot get the picture centered. I have rooted and I am going to try the finless 1.9 to see if it will work. All the video in XBMC is off to the lower right of my tv. I see and hear it but its not centered. I have tried it all and I'm at wits end. I am new to this so forgive me if I'm not doing something right or dont understand. Any help would be great.

    Update. I cannot use finless 1.9 it keeps telling me the footer in incorrect?

    I got finless 1.9 to work but the video wasnt working. I saw that some have reverted to 1.2. I tried that but now its stuck on the loading screen with the android and not doing anything. Is there a reset button on this thing?

    Thanks

    Riddick187
    Attached Files
    Last edited by riddick187; 10 September 2014, 23:57. Reason: Update
    Tags: None
    #2
    which resolution do you use?
    RK3288 Devices
    - Overview BOX (LINK !)
    - Overview STICK (Dongle) (LINK !)

    MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
    UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
    Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
    Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

    RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
    Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

    Comment

      #3
      Originally posted by no_spam_for_me View Post
      which resolution do you use?
      Now I cant even get it to get past the finless 1.2 android robot. It just stays there like its going to load but never does.

      my tv is 720P and i tried them all when I had the issues with the picture to the lower right.
      Attached Files

      Comment

        #4
        I don't use 720p but if I remember correctly, there are problems with older fw and/or xbmc's at 720P... one way to try is 1080i... another way is to try a newer rom and also maybe another xbmc
        oman's one http://www.freaktab.com/showthread.p...-s802-platform
        stane's one http://www.freaktab.com/showthread.p...c-M8-platforms
        RK3288 Devices
        - Overview BOX (LINK !)
        - Overview STICK (Dongle) (LINK !)

        MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
        UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
        Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
        Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

        RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
        Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

        Comment

          #5
          Originally posted by riddick187 View Post
          ... Is there a reset button on this thing?
          Yes, the one at the A/V hole you need to flash one of finless zip's...
          RK3288 Devices
          - Overview BOX (LINK !)
          - Overview STICK (Dongle) (LINK !)

          MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
          UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
          Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
          Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

          RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
          Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

          Comment

            #6
            Originally posted by no_spam_for_me View Post
            I don't use 720p but if I remember correctly, there are problems with older fw and/or xbmc's at 720P... one way to try is 1080i... another way is to try a newer rom and also maybe another xbmc
            oman's one http://www.freaktab.com/showthread.p...-s802-platform
            stane's one http://www.freaktab.com/showthread.p...c-M8-platforms

            Thanks. I will try that but I have to figure out how to have it get past the robot screen. The picture I added is the screen that it stays on. The screen is not frozen but it doesnt move past this and loads all day. I was trying to figure out how to reset it but cant find anything on that.

            Comment

              #7
              I don't know which robot-screen you mean? the one at recovery?
              RK3288 Devices
              - Overview BOX (LINK !)
              - Overview STICK (Dongle) (LINK !)

              MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
              UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
              Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
              Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

              RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
              Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

              Comment

                #8
                Originally posted by no_spam_for_me View Post
                I don't know which robot-screen you mean? the one at recovery?
                I added picture is on my third post. I have attached it again.

                Thanks for trying to help me.
                Attached Files

                Comment

                  #9
                  OK, I think it's the boot logo by bob (finless)... I don't know it, because I don't use it at the past...
                  Have you tried to reflash the 1.9 via the reset at the a/v hole?
                  If I remember correctly the newer pcb's don't like the older rom's...
                  RK3288 Devices
                  - Overview BOX (LINK !)
                  - Overview STICK (Dongle) (LINK !)

                  MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                  UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                  Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                  Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                  RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                  Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                  Comment

                    #10
                    Originally posted by no_spam_for_me View Post
                    OK, I think it's the boot logo by bob (finless)... I don't know it, because I don't use it at the past...
                    Have you tried to reflash the 1.9 via the reset at the a/v hole?
                    If I remember correctly the newer pcb's don't like the older rom's...

                    I pressed the button but it stays doing the same thing.

                    I tried the button again and it worked. Its loading 1.2 Once that is done I can change it to 1.9. Then I will have the video not working issue again but I can go from there

                    Comment

                      #11
                      the box doesn't reacts different if you press the reset during plugin the psu and power on?
                      then maybe you had bricked your device... it is unblickable, but not jet, because I have to go to bed... (but search through the thread-head-lines at this sub-forum and you will find the right thread...)
                      RK3288 Devices
                      - Overview BOX (LINK !)
                      - Overview STICK (Dongle) (LINK !)

                      MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                      UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                      Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                      Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                      RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                      Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                      Comment

                        #12
                        Originally posted by no_spam_for_me View Post
                        the box doesn't reacts different if you press the reset during plugin the psu and power on?
                        then maybe you had bricked your device... it is unblickable, but not jet, because I have to go to bed... (but search through the thread-head-lines at this sub-forum and you will find the right thread...)

                        THANKS AGAIN!!!!

                        Comment

                          #13
                          are you now at recovery?
                          if not, something to read till I'm back
                          Forums - FreakTab
                          http://www.freaktab.com/showthread.php?12522-Looks-like-I-ve-bricked-it/page2&p=174234#post174234
                          vBulletin Forums

                          the SD files you can find at
                          AfterMarket.pl :: domena tronsmart.eu
                          http://www.tronsmart.eu/downloads/

                          by by
                          RK3288 Devices
                          - Overview BOX (LINK !)
                          - Overview STICK (Dongle) (LINK !)

                          MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
                          UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
                          Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
                          Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

                          RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
                          Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

                          Comment

                            #14
                            Originally posted by no_spam_for_me View Post
                            are you now at recovery?
                            if not, something to read till I'm back
                            Forums - FreakTab
                            http://www.freaktab.com/showthread.php?12522-Looks-like-I-ve-bricked-it/page2&p=174234#post174234
                            vBulletin Forums

                            the SD files you can find at
                            AfterMarket.pl :: domena tronsmart.eu
                            http://www.tronsmart.eu/downloads/

                            by by

                            OK so I got the finless 1.9 back up and running but have the same issue I had before of the audio working but I do not get any video in XBMC

                            Comment

                              #15
                              if it the whole box issue

                              go to settings --> Display --> Display Position ---> set to around 92%

                              also set your resolution 720p or 1080p or 1080i

                              if it in xbmc the issue then

                              go to --> system --> video ouput --> video calibration

                              JustMe
                              Bugs are Sons of Glitches!

                              If you like my work and it's helped you, you can always shout me a beer or two Click - Here

                              Links : Visit JustMe ROMs - EM8 Square Roms - EM8 OpenELEC Rom - ADB GUI

                              JustMe

                              Comment

                              Previous 1 2 template Next

                              What's Going On

                              Collapse

                              There are currently 1894 users online. 0 members and 1894 guests.

                              Most users ever online was 63,956 at 18:56 on 20 March 2025.

                              Working...
                              X

                              We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                              By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                              I Agree