Beelink S82/S82H/M8/MXIII & Tronsmart S89/S89H - Finless 2.0 ROM

[ant]

OK i 5 times reflash fw and all time same problem i dont know why? i go back to 1.8finless and all is ok, but 2.0finless stuck with logo after reset to factory i put recovery image and flas all the same like before and when i shutdown box and when power on i have strange mesage on the screen maybe becouse google setings i dont know i just need to know (only i have this problem or not)sry on my bad eng .ty

Ok, reading back through oman's stock thread, this thread and oman google.doc this firmware still has various bugs. You may have found another?

Do you do the factory reset from android settings option or the option in recovery menu?
When I was playing around with 109k4 I definitely did data / cache wipe from recovery with no issues, maybe try that....

Also if you message is google voice or speech failed on first boot I got the same thing but it didn't affect the usability of my box.

I won't try the factory reset from android settings though. I can't be bothered to set back up again right now, sorry.

[bajann]

To fix your problem reflash the firmware
If you did a factory reset without a twrp backup you have nothing to loose.

I'm pretty sure if other users read your problem they won't wanna chance doing the factory reset....

OK i 5 times reflash fw and all time same problem i dont know why? i go back to 1.8finless and all is ok, but 2.0finless stuck with logo after reset to factory i put recovery image and flas all the same like before and when i shutdown box and when power on i have strange mesage on the screen maybe becouse google setings i dont know i just need to know (only i have this problem or not)sry on my bad eng .ty

[ant]

Plz just try to reset to factory ,i need to know is it ok for u or not (my box stuck with finless logo )

To fix your problem reflash the firmware
If you did a factory reset without a twrp backup you have nothing to loose.

I'm pretty sure if other users read your problem they won't wanna chance doing the factory reset....

[bajann]

Ok I fixed my problem. I *think* I was missing restore.img.

What I ended up doing was installing AMLinux (that install would boot, which is why I think restore.img was the key) and then re-flashing to Finless 2.0. Everything works just fine now.

Plz just try to reset to factory ,i need to know is it ok for u or not (my box stuck with finless logo )

[dankec]

Please, could someone download this cartoon:

http://www.speedyshare.com/ReanH/1954.12.11-Sheep-Ahoy-Jones-MM.avi

and report is there any de-sync in XBMC (SPMC) when HW decoding is On.


Thanks.

[bajann]

Hi Bob!

I love your work and your roms for the amlogic devices!
You make using these devices a lot better and inprove their usability.
I have one little problem with your latest 2.0 rom:

Toslink seems to be deaktivated by default, I found no way to switch it on in settings.
HDMI passthrough is aktivated by default, which works perfect, but when I like to only hear music from an iternet-radiostation, i dont want to switch on my tv to do so.
In your last rom, I could use toslink to hear internet-radio using my 7.1 receiver without hdmi.

Maybe there is a simple solution to this problem or I can't find any?

Greetings from Austria

Werner

how u conect receiver with box ?instruction plz?

[bajann]

after reset to factory box stuck with finless logo

After im reset my box to factory setings box stuck with finless logo im wait 5min but nothing diferent Do u try factory reset????

[Magnus33]

Ok I fixed my problem. I *think* I was missing restore.img.

What I ended up doing was installing AMLinux (that install would boot, which is why I think restore.img was the key) and then re-flashing to Finless 2.0. Everything works just fine now.

Yeah he tends not to include them now since there generic and the same in all the amlogic versions he makes.

[Targeter]

Ok I fixed my problem. I *think* I was missing restore.img.

What I ended up doing was installing AMLinux (that install would boot, which is why I think restore.img was the key) and then re-flashing to Finless 2.0. Everything works just fine now.

[Targeter]

Its quite hidden on these devices.

You need to stick a tooth pick or the like in the av hole the button hidden at the bottom and your going to feel the click when you hit it.
You can reflash it by the rest button method.

Yeah I just figured that out as well, but it's still booting to the finless animation, even when powering up with the reset held

[Magnus33]

I just installed this, but now my box is stuck at the boot animation. How can I fix this? I found no way to boot to recovery mode (can't find a reset button on my device, S82B)

EDIT: Ok I learned about the reset button in the A/V connector, but it still boots to the animation and stays there.

Its quite hidden on these devices.

You need to stick a tooth pick or the like in the av hole the button hidden at the bottom and your going to feel the click when you hit it.
You can reflash it by the rest button method.

[Targeter]

I just installed this, but now my box is stuck at the boot animation. How can I fix this? I found no way to boot to recovery mode (can't find a reset button on my device, S82B)

EDIT: Ok I learned about the reset button in the A/V connector, but it still boots to the animation and stays there.

[nortonuser]

Thanks

You mean SPDIF output yes?

You use the SettingsMBox app, 'advanced' tab. Set Digital audio auto-detection off and Digital audio output on and select SPDIF passthrough in the popup.

Good tip.

[Joffa]

Hi Bob!

Toslink seems to be deaktivated by default, I found no way to switch it on in settings.

You mean SPDIF output yes?

You use the SettingsMBox app, 'advanced' tab. Set Digital audio auto-detection off and Digital audio output on and select SPDIF passthrough in the popup.

[maroot]

same issue here..after update process is finished and the box reboots after the logo my display is also garbage...any advice?

I got it working by using the update tool. Give it a try.