Beelink S82/S82H/M8/MXIII & Tronsmart S89/S89H - Finless 2.0 ROM

[Addyhash]

hey Bob, any chance of a list of what i need to back up off stock 109k4 for the live wallpapers to work on your latest 2.0... (mainly the floating leaves in water one)

[neoman4426]

Just a suggestion of course, but if I were OP I'd include the "Hey, I'd appreciate you not uploading my work elsewhere without permission" thing in the post itself, not just the readme. I was having trouble with my internet at the time and needed a self restarting/correcting download so I used one of those services that you point to a file and it creates a torrent with the original server as a web seed on 1.9, then felt horrible about doing so once I had downloaded and read the readme. Sorry about that. Though I guess that's my fault for not asking first, should have been common sense on my part.

[otisrhw]

Does this flash modem firmware or network chip? I think I flashed the wrong rom awhile back and now never get speeds over 30mbps I get 60 over wifi before? I want to flash it again do I need AMlogic tool to flash that chip?

[marcuspresident]

Sv: NEW - Beelink S82/S82H/M8 & Tronsmart S89/S89H - Finless 2.0 ROM

For some reason 1.8 worked perfectly for me, but when I tried to upgrade to 1.9 and now 2.0 suddenly xbmc and youtube no longer work properly, there is no sound and the video looks choppy.

Am I missing a setting or something I need to change?

Thanks.

EDIT: The problem may just have been Kodi XBMC. I rebooted the device and youtube started working. I tried a different video file and it seemed to work but then another didn't. I reinstalled gotham 13.2 and everything seems to work now. Shrug.

On a sidenote, are there any settings I should be changing in xbmc to get the best palyback?

Thanks again

Same for me. Haven't tried downgrading xbmc. But kodi worked with finless 1.9.
😕😞

For some reason 1.8 worked perfectly for me, but when I tried to upgrade to 1.9 and now 2.0 suddenly xbmc and youtube no longer work properly, there is no sound and the video looks choppy.

Am I missing a setting or something I need to change?

Thanks.

EDIT: The problem may just have been Kodi XBMC. I rebooted the device and youtube started working. I tried a different video file and it seemed to work but then another didn't. I reinstalled gotham 13.2 and everything seems to work now. Shrug.

On a sidenote, are there any settings I should be changing in xbmc to get the best palyback?

Thanks again

[warken]

Of course.

[no_spam_for_me]

And you also don't forget this ?

...
________________________________________________


DO NOT just copy this download ZIP to SDcard and expect it to work!
UNZIP it and read the README for instructions!

________________________________________________

...

[warken]

Yes, i download again and there is same error.

[Magnus33]

I'm trying to install on MXIII 2GB, but there is some error:
E:failed to verify whole-file signature
E:signature verification failed

Any hint?
Thanks.

Have you tried re-downloading?

[warken]

I'm trying to install on MXIII 2GB, but there is some error:
E:failed to verify whole-file signature
E:signature verification failed

Any hint?
Thanks.

Read this post. I explain it all

http://www.freaktab.com/showthread.php?14254-720P-fixer-patch-for-Finless-1-7-ROM

Bob

I see said the blind man. So I will wait until you figure out the 720P patch or tell the wife we need to upgrade the TV. Decisions, decisions. Honey, where is my tape measure. I need to see if an 80" TV will fit in the car.

Thanks for the prompt reply.

[Finless]

Good morning Finless.

I am a little confused about this line in the first post....

11) Sorry folks. 720P patcher will not be provided this time!
Why? Because the code has now drastically changed and I have not been able to make it work this time.

In the environment where my S89-H is located, I have available a 720P and lower Projector and a 720P and lower TV. The projector will accept a 1080P signal, but will downscale it. The TV will not downscale.

I am currently running the Tronsmart supplied Tronsmart_S89-H_SDcard_108K4_140811.zip ROM and the updated xbmc-13.2-Gotham-4K-video-2160P-output.apk.

This combination works fine, but XBMC has the known problems with periodic video freeze, audio continues. The screen size issue and the mouse doubleclick changes screen to 1/4 size issue.

After all that, if I was to load Finless 2.0, would the unit boot properly or is the 720P restriction going to be a problem?

Read this post. I explain it all

http://www.freaktab.com/showthread.php?14254-720P-fixer-patch-for-Finless-1-7-ROM

Bob

720P ???

Good morning Finless.

I am a little confused about this line in the first post....

11) Sorry folks. 720P patcher will not be provided this time!
Why? Because the code has now drastically changed and I have not been able to make it work this time.

In the environment where my S89-H is located, I have available a 720P and lower Projector and a 720P and lower TV. The projector will accept a 1080P signal, but will downscale it. The TV will not downscale.

I am currently running the Tronsmart supplied Tronsmart_S89-H_SDcard_108K4_140811.zip ROM and the updated xbmc-13.2-Gotham-4K-video-2160P-output.apk.

This combination works fine, but XBMC has the known problems with periodic video freeze, audio continues. The screen size issue and the mouse doubleclick changes screen to 1/4 size issue.

After all that, if I was to load Finless 2.0, would the unit boot properly or is the 720P restriction going to be a problem?

[Magnus33]

Streaming

Seems to be a glitch involving bandwidth rather then the codec itself or maybe a combo of both.

Local playback seems to work fine but streaming has issues.

I use plex which seems to bypass this issue.

[rapalax]

Re: NEW - Beelink S82/S82H/M8 & Tronsmart S89/S89H - Finless 2.0 ROM

Local or streaming?

Streaming

[epiclectic]

S89-H confirmed working...

Hi, brand noob user here, just got my S89-H 2 days ago. Started with stock 107 , installed Finless 2.0, and seems to be working great so far. I have a few issues , which are likely just my lack of knowledge on this box, but I can't get the youtube app to run in 1080p like it did before Finless.

Thanks for the great work, Bob. You are awesome!