Beelink S82/S82H/M8/MXIII & Tronsmart S89/S89H - Finless 2.0 ROM

[bajann]

do you know what helps?, placing the box in vertical position. Since i did that easy move my box does not get very hot as it used to in flat position (the small holes at the bottom of the box were useless in that position and the box would not "breath" properly, dus overheating the box and the table material under it).

Why not biger heatsink ?

[Veronica]

Nope tried it doesn`t work > bootloop, reinstalled 2.0 Kernel

do you know what helps?, placing the box in vertical position. Since i did that easy move my box does not get very hot as it used to in flat position (the small holes at the bottom of the box were useless in that position and the box would not "breath" properly, dus overheating the box and the table material under it).

[chsmith1976]

http://www.freaktab.com/showthread.p...mlogic-devices

Thanks, worked great. One thing I'll mention because I'm sure others will run into this, is that using the temporary mode, you can only boot into TWRP if you run it from SD card, USB DOES NOT WORK (found out after a few experiments with this first). Anyways, feeling great finally having an image backup of my current setup.

[bajann]

But as I know only to change it manually at XBMC instead at Settings , no auto...

just need to enable addon and addon run all time auto change i think .no spam u have minix just try

http://www.minixforum.com/threads/autoframerate-detection-switching-output-in-xbmc.601/

i hope this will work on all amlogic device

[no_spam_for_me]

minix make addon in xbmc to display refres rate to mach video but only for minix x8

But as I know only to change it manually at XBMC instead at Settings , no auto...

[scooter2014]

You can use both and running 2.0 now and it works great. Spmc link in spmc thread.

[bajann]

I'm still on AMLinux, but now I'm considering Finless 2.0...

Most of the time I'm using XBMC/KODI... Few things is not clear here:

1. How good android XBMC works with streaming add-ons (Mashup, 1channel, simple player, genesis...)?
(My only reason to go to linux distro was "Adjust display refresh rate to match video" which is, unfortunately, not available under android. Even with that option on XBMC is still stuttering under AMLinux)

2. If I decided to migrate to android... should I use Kodi 14 beta 3 or SPMC?

3. If SPMC, could someone, please, post SPMC download link?


Thanks.

minix make addon in xbmc to display refres rate to mach video but only for minix x8

[Gaili]

Only thing you might try is 109 kernel.
Use my CPU fix Stock from 1.9 ROM. This will install 109 kernel.

Bob

Nope tried it doesn`t work > bootloop, reinstalled 2.0 Kernel

[Gaili]

Only thing you might try is 109 kernel.
Use my CPU fix Stock from 1.9 ROM. This will install 109 kernel.

Bob

Ok thanks!

[Finless]

Only thing you might try is 109 kernel.
Use my CPU fix Stock from 1.9 ROM. This will install 109 kernel.

Bob

[Gaili]

Tempature Problem

Hi Bob,
i have one of the temperature calculated M82 Boxes, means the one with the old Cpu and the 5 degree steps. Since i installed the version 2.0 of your rom, the temperature stays between 70 and 80 degrees with nothing running on it. I do not use the cpufix. That is 25 degree higher than with your 1.9 rom when the the box is in idle. Actually i also tried oman 109k4 same problem there ... ist there a pach which i can use?

thanks

[dankec]

If I were you, I should try SPMC (can be found in the playstore). Disable AMlogics code in HW and there will be no more hick-ups. At least in my situation.

By disabling Amlogic codec you choose software decoding instead of hardware. It's not a soulution, it's workaround

[Genem]

2. If I decided to migrate to android... should I use Kodi 14 beta 3 or SPMC?

3. If SPMC, could someone, please, post SPMC download link?


Thanks.

If I were you, I should try SPMC (can be found in the playstore). Disable AMlogics code in HW and there will be no more hick-ups. At least in my situation.

[dankec]

I'm still on AMLinux, but now I'm considering Finless 2.0...

Most of the time I'm using XBMC/KODI... Few things is not clear here:

1. How good android XBMC works with streaming add-ons (Mashup, 1channel, simple player, genesis...)?
(My only reason to go to linux distro was "Adjust display refresh rate to match video" which is, unfortunately, not available under android. Even with that option on XBMC is still stuttering under AMLinux)

2. If I decided to migrate to android... should I use Kodi 14 beta 3 or SPMC?

3. If SPMC, could someone, please, post SPMC download link?


Thanks.

[drtek]

Hi Finless,

thanks for your excellent and hard work.

No 720p patch means I should not install this on my 720p only TV setup and stay with my patched 1.9 right?

Thanks,

Tek