HPH RK3288 ROM v1.2 by mo123 (20141117)

[DuHaudegenDu]

Will release new ROM next week with SPMC v14(maybe v13.3.5?) when it's finalized.
Rockchip will then also solve DTS, Passthrough support with XBMC.
No point in releasing 2 ROM's now with almost no new improvements since the last ROM.

So sad that AMLogic now has full GPU and VPU acceleration in Linux and Rockchip still not

Damn, I dream of your rom on our shit-box.
Is there no way?

Did I and oldouse anything wrong?

Greetings by DuHaudegenDu

[mo123]

Will release new ROM next week with SPMC v14(maybe v13.3.5?) when it's finalized.
Rockchip will then also solve DTS, Passthrough support with XBMC.
No point in releasing 2 ROM's now with almost no new improvements since the last ROM.

So sad that AMLogic now has full GPU and VPU acceleration in Linux and Rockchip still not

[roolmapool]

Might add screensaver support again in new version

Have you set 'Use software decoding for audio DTS/AC3' in MXPlayer settings?
Also try to use the custom DTS/AC3 codec in MXPlayer.

Yep, i try both... Same problem with stock player BTW.
No issue in SW decoding or with xbmc/spmc.

[mo123]

OK, i flashed your rom 1.2 with new kernel.
So far, it's stable, no problem.
Antutu =37K
I ll update CEC tests and nfs tests later.

About rom, 2 things :
- no screensaver support
- Harware decoding issue XVID/AC3 with stock/MXPlayer H/W... it's like a slow motion movie (15Fps)
Issue is present in wasser rom with last RK SDK.

Thx.

Might add screensaver support again in new version

Have you set 'Use software decoding for audio DTS/AC3' in MXPlayer settings?
Also try to use the custom DTS/AC3 codec in MXPlayer.

[mo123]

Hello mo123,

i think i installed your new kernel,

but how to be sure that is installed.

i copy .kl file to system/usr/keylayout
and restart, but i couldnt test CEC, do i have to start CEC somewhere (from TV)

I included all the source code of HDMI CEC in the kernel so it should work, might need to edit the *.kl file for the remote buttons?
To make sure you use the new kernel, the date will be 6 or 7 Dec in Android/settings/About screen and kernel name will be mo*@mo*.
Might need to click 5 times on device name in About to see all information.

[roolmapool]

Hello mo123,

Not still tested your new kernel. I will today, and feed back
Mainly problem is about recovery... no TRWP. It's really a pain to flash and go back to "our family" rom.

BTW your work is really apprecied. THX.

OK, i flashed your rom 1.2 with new kernel.
So far, it's stable, no problem.
Antutu =37K
I ll update CEC tests and nfs tests later.

About rom, 2 things :
- no screensaver support
- Harware decoding issue XVID/AC3 with stock/MXPlayer H/W... it's like a slow motion movie (15Fps)
Issue is present in wasser rom with last RK SDK.

Thx.

[trycatch]

Hello mo123,

i think i installed your new kernel,

but how to be sure that is installed.

i copy .kl file to system/usr/keylayout
and restart, but i couldnt test CEC, do i have to start CEC somewhere (from TV)

[roolmapool]

No one even tested new kernel

Hello mo123,

Not still tested your new kernel. I will today, and feed back
Mainly problem is about recovery... no TRWP. It's really a pain to flash and go back to "our family" rom.

BTW your work is really apprecied. THX.

[m1pnk]

lol.... trouble is mo you do such a good job we are all just waiting for new rom with kodi/spmc

[mo123]

No one even tested new kernel

[mo123]

Kodi Helix final will be released in less than 2 weeks, then a new SPMC will also be released.

Here is a new kernel to flash after unzipping
- NFS
- NTFS Support
- 30+ Cameras/Webcams Support added
- HDMI CEC working(also copy HDMI_CEC.kl file)
- Update the Blu-ray player library
- gpu:elevated GPU pll frequency 420
- rga/rga2 driver error handling fixed
- DDR : do not set the frequency when ddr initialization
- ethernet:gmac: fix the bug of connection failure with PHY because of wrong phy_addr
- mmc: workaround DDR mmc devices internal divider bug
PS: Only custom kernel with working HDMI IN.

http://www.mediafire.com/download/7wg8ztcpct86tz7/kernel.7z

Copy following file for HDMI CEC to system/usr/keylayout and to make D-Pad buttons work.

http://www.mediafire.com/download/w24x018dlawmtt3/hdmi_cec_key.kl

XBMC
Install 'XBMC Backup' from Program addons.
Setup backup directory to where you copied XBMC backup zip.
Restore backup.
Will take a while and need to restart XBMC/SPMC, say 'yes' to prompt that a different XBMC was used to make the backup.

http://www.mediafire.com/download/0t93aftwa43yny3/201412070546.zip

[mo123]

hello. i wanto ask you if it is possible to do a rom like this (hph rk3288-android-ubuntu_20140924) but with your custom rom?

Yes
Just made a new kernel, then have to dump Linux partition and combine everything into a new ROM.

[juliocunha]

hph-rk3288-android-ubuntu

hello. i wanto ask you if it is possible to do a rom like this (hph rk3288-android-ubuntu_20140924) but with your custom rom?

[trycatch]

The stock ROM and future ROM's are now 1.8Ghz by default, not overclocked.
You can try to use the kernel,resource.img file from the v1.0 ROM with the new ROM and see if it uses less power, will then run at 1.6Ghz for CPU.

Ok, thanks for your reply. then, i think i will get 3A power supply...

[mo123]

Hi mo123,

i use your 1.2 rom in my device and its just great but
i also have a plan to run this device in CAR.

in old version or stok version, device was running with 2.1A power (from car)

but 1.2 version device is not booting in car
its ok with 3A power outlet at home.

i plan to get 3A power adapter for car, but it is posible to make a version non overclocked ?


thanks any way...

The stock ROM and future ROM's are now 1.8Ghz by default, not overclocked.
You can try to use the kernel,resource.img file from the v1.0 ROM with the new ROM and see if it uses less power, will then run at 1.6Ghz for CPU.