NEW - Beelink S82/S82H/M8/MXIII & Tronsmart S89/S89H - Finless 2.1 ROM

[Mywaruk]

But how I am installed finless's 111k4 on stock 109k, but on round 4K device without TWRP ? I think a problem is with MXIII 1/8Gb device...

Im pretty new to this my self and not sure how sorry, i did it from booting twrp from sd, flashing it then booting into twrp and installing 112k4 from there.

[Zhuinden]

I can't find SETTINGS in the Apps menu, only a widget.

Is that normal?

[Trex]

You are trying to install a rom using the boot TWRP from SD,

Install TWRP, then flash the rom (unzip the 112k4 zip, drag the 3 files to sd card, boot to recovery (TWRP) then install, then choose the zip file that will show up, after install select the wipe option at the bottom or you will run into problems like i did.

But how I am installed finless's 111k4 on stock 109k, but on round 4K device without TWRP ? I think a problem is with MXIII 1/8Gb device...

[scooter2014]

I'll I will say is if your having issues Fomat the sd card copy all the files after they have been opened from compressed file. Copy to sd the 3 files. Turn off box install sd card. Push in set pin. Press power will pin depressed and it installs with no issues. Have not had a issue installing on m8b. As for new release I can wait this one dies everything I need and don't expect Bob to jump and make new any time new release out. I'll wait it's always worth the wait with his roms��

I think many just delete files on sd format it again it worked for me every time.

[Mywaruk]

Hi Guys,
Im trying to update with this rom. I followed the instructions, i dont think im doing anything wrong... I put the files s82_s89_finless20.zip plus recovery.img on the SD-Card as per instructions, went into the update&backup software, selected the rom and clicked update, it reboots, shows the android with the blue ball in the stomach moving and says installing system update, the bar moves about 1/5 and then just stops and freezes, i had to disconect the power and reboot and luckily its working fine, i then tried the toothpick method and added the file factory_update_param.aml to the other files and got the same result, moves about 1/5 and just freezes. I disconect the power and reboot the box without the card and everything is OK it boots fine... Am i doing somthing wrong ? Im on stock 110K4 that came with the box, its an MXIII 1g/8g . I have re-downloaded the file thinking it might have been corrupted and tried everything again but still get the same result. Any ideas whats going on ?
Thanks

You are trying to install a rom using the boot TWRP from SD,

Install TWRP, then flash the rom (unzip the 112k4 zip, drag the 3 files to sd card, boot to recovery (TWRP) then install, then choose the zip file that will show up, after install select the wipe option at the bottom or you will run into problems like i did.

[Trex]

Hi Guys,
Im trying to update with this rom. I followed the instructions, i dont think im doing anything wrong... I put the files s82_s89_finless20.zip plus recovery.img on the SD-Card as per instructions, went into the update&backup software, selected the rom and clicked update, it reboots, shows the android with the blue ball in the stomach moving and says installing system update, the bar moves about 1/5 and then just stops and freezes, i had to disconect the power and reboot and luckily its working fine, i then tried the toothpick method and added the file factory_update_param.aml to the other files and got the same result, moves about 1/5 and just freezes. I disconect the power and reboot the box without the card and everything is OK it boots fine... Am i doing somthing wrong ? Im on stock 110K4 that came with the box, its an MXIII 1g/8g . I have re-downloaded the file thinking it might have been corrupted and tried everything again but still get the same result. Any ideas whats going on ?
Thanks

I am especially register, to say that I have exactly same problem with same device. My SD card is ok, because I am successfully installed Oman's 111k4 from it.
Hope finless can fix this problem in new firmware !

[lolloarnova]

+1 for this!
I would like to see a Finless cleaned & tweaked release of 112k4 as well!

+2 for this!!!!

[willyghost]

Trouble with update

Hi Guys,
Im trying to update with this rom. I followed the instructions, i dont think im doing anything wrong... I put the files s82_s89_finless20.zip plus recovery.img on the SD-Card as per instructions, went into the update&backup software, selected the rom and clicked update, it reboots, shows the android with the blue ball in the stomach moving and says installing system update, the bar moves about 1/5 and then just stops and freezes, i had to disconect the power and reboot and luckily its working fine, i then tried the toothpick method and added the file factory_update_param.aml to the other files and got the same result, moves about 1/5 and just freezes. I disconect the power and reboot the box without the card and everything is OK it boots fine... Am i doing somthing wrong ? Im on stock 110K4 that came with the box, its an MXIII 1g/8g . I have re-downloaded the file thinking it might have been corrupted and tried everything again but still get the same result. Any ideas whats going on ?
Thanks

[JockeSve]

hey bob will you release a 2.2 since 112k4 is out ?
if so can u add tsn go fix to it please thanks

+1 for this!
I would like to see a Finless cleaned & tweaked release of 112k4 as well!

[londonshore]

finless 2.2

hey bob will you release a 2.2 since 112k4 is out ?
if so can u add tsn go fix to it please thanks

[Mywaruk]

All fixed and up and running 112k4 with no problems as yet (touch wood), iv lost bluetooth but i dont mind that

Thanks guys!

When i reinstalled 112k4 AFTER flashing back my old 108k4, i havent lost anything this time, no data or apps.. sweet, not sure what i did there to do that.

Again, thanks guys! great forum you got here!

[lost2]

for my tronsmart s89 with 111 i use TWRP Beelink s82b - not compatible with 109k4 onward the only one that worked , try it without install it with sd card method

[Mywaruk]

Thanks,

What TWRP would i need for the new 112k4 please? 109k4?

Also what do you mean by write twrp.zip? sorry that part has confused me.

Thanks

UPDATE: Solved, booted into TWRP using 109k4

[lost2]

How would i do that please as i can only boot to home screen? i use a mac as well so connection to a PC i cant do as i dont own one... eeek

download the twrp.zip for your device , unzip it and take the recovery.img , write recovery.img in formated f32 sdcard and write twrp.zip to , put the sdcard in slot of mbox power off the mbox, power on with reset pressing this should be load the recovery.img (twrp) that you have in sdcard , then install twrp.zip (this is how i made mine ) one other way (that may work, i do it on my xiaomi phone) is with Rashr (https://play.google.com/store/apps/d...erytools&hl=el) i haven't try it on my mbox (tronsmart s89)

[Mywaruk]

How would i do that please as i can only boot to home screen? i use a mac as well so connection to a PC i cant do as i dont own one... eeek