Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
[ROM] DOVLESS - 1.13 - (12.02.2015) - based on Finless ROM 1.1 - BETA2
Collapse
This is a sticky topic.
X
X
-
Just try, very easy!
You can also boot from sd card, have a look here: http://www.freaktab.com/showthread.p...8-Boot-from-SD
Comment
-
Originally posted by Boxx View Posthttp://www.freaktab.com/showthread.p...e-Flash-Method
Just try, very easy!
You can also boot from sd card, have a look here: http://www.freaktab.com/showthread.p...8-Boot-from-SD
Comment
-
Ok stI'll lost with this made the file. Burned the sd card put the pre install on sd card it flashes but nothing changed in the rom no programs installed thinking I missed something.
I tried copy to the sd card after the flash to sd. I tried paste copy it doesn't install the programs in during install but I see the file once I open Es file explorer? Maybe I have to make folder USB KEY ROOT FOLDER and put files in that??Last edited by scooter2014; 02-26-2015, 02:13.Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.
Comment
-
Maybe I goofed do the files go on the sd card or onto a usb stick? Noticed it says USB KEY ROOT FOLDER.
Ok figgered it out doh!!!! Lmao it's the usb has to be usb at back of box this is Awsome! !!!!!!!. Thanks for this.
WoooohooooLast edited by scooter2014; 02-26-2015, 16:14.Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.
Comment
-
Write DOVLESS 1.8 to Telos System Memory Instead of Boot from SD
Hi,
I was able to easily create a bootable SD with DOVLESS 1.8, but I want to write this new ROM to system memory in my Draco Telos.
I use my SD card to transfer content a lot and don't want the card being in the slot each time for boot up.
When I used "Product Mode" in Phoenix Card 3.09 to write the ROM, it hangs during the pre-boot green progress bar.
Can anyone help?
Thanks!
Gary Brant
Comment
-
Originally posted by scooter2014 View PostI had same issue and I formated card with windows and then started program and it worked program takes a bit to install as well so let it run for bit.
I want to load the ROM once into the Draco system memory, to be able to boot each time without needing SD card.
It's a function of the way the image file is written using Phoenix Card 3.09, when I try to use the "Product" method, the image it creates does not fully load during fresh boot with SD card in the box.
Comment
-
Ok then follow the instructions in the first post that install to internal memory only issue is running from sd. Process for running of sd on same post. I had same issue lap top burn to sd just formated with windows and it installed via the sd once I did.Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.
Comment
-
Originally posted by 140hours View PostThanks for your reply, but my issue is that I don't want to boot from the SD card each time with the DOVLESS ROM image file.
I want to load the ROM once into the Draco system memory, to be able to boot each time without needing SD card.
It's a function of the way the image file is written using Phoenix Card 3.09, when I try to use the "Product" method, the image it creates does not fully load during fresh boot with SD card in the box.
If it still fails, check your card or try a different one.
Comment
-
Originally posted by Boxx View PostHave you run the img through imgrepacker? If so, try to burn the unprocessed image as product. If it all fails, i would redownload the image, format card with hp tool and try again.
If it still fails, check your card or try a different one.
This ROM truly rocks the Draco - fantastic job and built on a great foundation from BOB!
Gary Brant
Comment
What's Going On
Collapse
There are currently 2877 users online. 3 members and 2874 guests.
Most users ever online was 16,134 at 08:28 on 08-11-2023.
Comment