Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Won't boot properly - tried to update now goes straight to recovery

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Won't boot properly - tried to update now goes straight to recovery

    Hello everyone,

    I'm having trouble trying to update the firmware for my Beelink player. I tried to update using the android tool but no matter what driver I used the PC did not recognize my device. I followed the "Beelink R89/UBOX ROM/Tools release" thread instructions with no luck (Windows 7 PC).

    So silly me I tried to use Flashify to update the ROM, now the player just goes straight to the stock recovery - I can't get the system to load at all???

    How do I flash the stock ROM to go back to normal??

    Any help would be much appreciated!
    Tags: None
    #2
    Maybe you flashed the wrong part to the wrong partition...
    Because of the driver, did you used the latest from post #2 at "Beelink R89/UBOX ROM/Tools release"?
    Had you also have a look at http://www.freaktab.com/showthread.p...-box-read-this!!!! ?
    RK3288 Devices
    - Overview BOX (LINK !)
    - Overview STICK (Dongle) (LINK !)

    MINIX NEO: Z64 W/A - (Intel Z3735F); X8-H Plus - (Amlogic S812H); A2 Lite (sponsored by minix.com.hk)
    UGOOS UT3S (4/32GB with fan) - FW 2.0.6 - (RK3288) (sponsored by GearBest.com)
    Tronsmart Draco AW80 Meta (2/16GB) - FW v2.0rc3 - (Allwinner A80) (sponsored by GeekBuying.com)
    Beelink / UBOX R89 - FW 111k4110_1219 - (RK3288) (sponsored by Netxeon (Beelink))

    RK3188: pcb => "CH001 1332 TN-BX09_V2.1" (K-R42 / CS918...) => wasser KK 1.0.3 (old rev)
    Fly Mouse Mini Wireless Keyboard with 2 mode learning IR remote 'iPazzPort KP-810-16'

    Comment

      #3
      Originally posted by no_spam_for_me View Post
      Maybe you flashed the wrong part to the wrong partition...
      Because of the driver, did you used the latest from post #2 at "Beelink R89/UBOX ROM/Tools release"?
      Had you also have a look at http://www.freaktab.com/showthread.p...-box-read-this!!!! ?
      Yes, I used the latest files from the 2nd post in "Beelink R89/UBOX ROM/Tools release". I have also used the updated drivers from the other thread that you posted. Computer says "USB device not recognized". What do I do now? Any advice on how to go back to original?

      Comment

        #4
        A total shot in the dark..

        Originally posted by jivinbeelink View Post
        Yes, I used the latest files from the 2nd post in "Beelink R89/UBOX ROM/Tools release". I have also used the updated drivers from the other thread that you posted. Computer says "USB device not recognized". What do I do now? Any advice on how to go back to original?
        When you are using the RK Driver Assistant, are you uninstalling the previous driver prior to installing the new driver? Disconnect your R89 from the PC before doing either.
        Of course the obvious question, have you tried a different cable or a diff. USB port on your PC?
        Good luck.

        Comment

          #5
          Originally posted by RISCy Dude View Post
          When you are using the RK Driver Assistant, are you uninstalling the previous driver prior to installing the new driver? Disconnect your R89 from the PC before doing either.
          Of course the obvious question, have you tried a different cable or a diff. USB port on your PC?
          Good luck.
          Just tried again making sure I uninstalled all drivers including going to regedit and removing anything Rockchip related. Different USB cable, different USB port. No luck

          Surely there must be another way to flash this thing? Or is my device now dead?

          Comment

            #6
            Originally posted by jivinbeelink View Post
            Just tried again making sure I uninstalled all drivers including going to regedit and removing anything Rockchip related. Different USB cable, different USB port. No luck

            Surely there must be another way to flash this thing? Or is my device now dead?
            Try disabling any kind of antivirus just in case it is getting in the way, do you have another pc you can try?? also as a last resort you could try installing a virtual machine with windows installed and using that.

            Comment

              #7
              The installation of Vista I used to flash my UT3, required restart after USB driver installation, before the PC recognized the box. First time in a while Vista required restart after adding new USB device/driver. Maybe it was just me, or the fact that I'm the last guy on planet Earth using Vista.

              Comment

                #8
                Also be sure to use a usb 2.0 port..(but with you using vista...i dont think usb 3 was around)
                Prahjister ****MK808(nonB)****MK808B V5****MK808B Plus****UBOX R89**** CX919****MK808B Pro****Nexbox N9****Eny Em95****Matricon Q2****Tanix TX5 Pro****

                Comment

                Previous template Next

                What's Going On

                Collapse

                There are currently 2895 users online. 2 members and 2893 guests.

                Most users ever online was 63,956 at 18:56 on 20 March 2025.

                Working...
                X

                We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                I Agree