NEW CS918 2015 STOCK ROM FOR NEW PCB

[lvh]

Finally got it to load and program. This was not a walk in the park at all

Hi,

Can you show me how to load the firmware back to the box, using tool 1.3.7
my tv box is same as your CS918 v7_0 2g+8g

Thx

[node]

Hi,

Can you show me how to load the firmware back to the box, using tool 1.3.7
my tv box is same as your CS918 v7_0 2g+8g

Thx

You need a USB/OTG cable. Unzip all the files in a folder. Make sure the USB driver is loaded for the box on your PC/MAC.

Start the program 1.3.7 and check all the boxes for the files making sure you point to the correct folder/location.

Do not power the box as yet, just connect this USB/OTG cable to the box OTG port and the USB to your PC/MAC.

Hold the reset button under the box and plugged in the power cable, if the PC recognize the box you should hear a sound, and in the program you will see unit found. If you do not see this, your drivers are not installed. Nothing can be done until you get this installed.

If all okay click on start and it will write the files to the box and the blue light should lit. If the blue light does not lit, try again, you can also select two or three files at a time instead of all at once.

good luck

node

[Kooiboy]

Movie

http://www.mediafire.com/view/ul2rvtxn8o3ds2l/Firmware.mp4

[policevidin]

Hello, i have a problem with my TVBOX, he stop working.
When i push power button the start with RED light and OFF.
I'm download the original firmware from the user on the forum, i watched many times the move but the module don't starts. Please help me!
The module is CS918 v7_0 2gRAM+8gROM

[node]

Hello, i have a problem with my TVBOX, he stop working.
When i push power button the start with RED light and OFF.
I'm download the original firmware from the user on the forum, i watched many times the move but the module don't starts. Please help me!
The module is CS918 v7_0 2gRAM+8gROM

Best select two files at a time and write them, instead of all..

[policevidin]

Best select two files at a time and write them, instead of all..

Which two files? This is my folder with files.
And what i have to do with Loader file.

[no_spam_for_me]

I think he means to start with parameter and misc and at next step the next two one, BUT I don't think this is the right way...
1. "No Found RKAndroid rock usb" ??? Normally, after IDB and TEST it should reconnect...
2. BUT "Writing data to flash..." seems to work but not the check and normally every separate file will be shown at write and check and I cant identify which data will be write????

You will find a sub-directory /LOG, clear it and start again and then post the log file... and maybe we find a way....

[policevidin]

On the picture the model is unplugged from USB.
OK , i flashed. I make a mistake with the size. There are 2048mb memory and my files is 3124 mb. When i flash with this file (pic 1) the process finished successfully. But when i start the TVBOX he start with BLU light and comes up the linux logos, and restart, then again start with linux logos and again restart. This process is unstoppable. If i start the TVBOX and immediately press the RECOVERY button there is shine the android logo with instrument in the stomach, after 2 minutes the module is restarting and the Linux logo is comes up again and process with restarting is comes again. Where is the problem??? I will make a video with all process.

[no_spam_for_me]

Sorry, I don't understand what you do (also you don't answer the question/request)....
But btw: if I have al look at the screen copy at post #49 I see that you also checked row 10, 11, 12 which also use 0x000000 at address which couldn't work...

[policevidin]

Yes, but if i checked row 10, 11, 12 the writing process fail, if i checked row row 1,2,3,4,5,6,7,8 the process is successful. On the first picture in post #49 i used the procedure from the Video from post #48. Here is my video.
1. https://www.youtube.com/watch?v=t4Zy3z4tni4
2. https://www.youtube.com/watch?v=lWDlMeKWfjs

[Jimiguitar]

Evening all, I managed to flash the rom for my quad core 2gb, but i had to use the Recovery.img from the first post, as the recovery.img in the other rom (provided by Berriak-TX) has a filesize of 0!
also, has anybody been able to get a custom rom/kernel working on our boards? The reason i bought mine was to use as a media center, however the board is stuck using the 720p kernel and without root i cannot edit my build.prop to enable the dts dd5.1 hack

[liose]

I have the same board 2GB RAM and 2 questions.
First: i know from my smartphone that you can install CWM is there something like this for this box?
And i read that you can boot linux over an SD card is it possible for this board too and when yes can you show me a tutorial ?
Thank You.

Sry for my bad english.

[maddmaxx409]

I have the exact system as in the first post but mines is 2gb ram/ 8 gb rom. I have been looking to see if any one else has issues with wireless keyboard as mines. When searching or scrolling in Kodi or xbmc it seems to scroll on its own as if i am holding the down or up arrow. I was wondering if i needed a usb driver or a driver for Hausbell H7 Mini

[Jimiguitar]

I have the exact system as in the first post but mines is 2gb ram/ 8 gb rom. I have been looking to see if any one else has issues with wireless keyboard as mines. When searching or scrolling in Kodi or xbmc it seems to scroll on its own as if i am holding the down or up arrow. I was wondering if i needed a usb driver or a driver for Hausbell H7 Mini

Mine does this whatever I use. Does it with the remote and with a USB keyboard

[Jimiguitar]

I have the same board 2GB RAM and 2 questions.
First: i know from my smartphone that you can install CWM is there something like this for this box?
And i read that you can boot linux over an SD card is it possible for this board too and when yes can you show me a tutorial ?
Thank You.

Sry for my bad english.

You can install a generic version of cwm. I managed to install one when playing around with the unit. However it will only allow actions to be performed on the ramdisk. So you can't wipe dalvik/cache etc or perform a factory reset with it