Increase app storage - repartition storage for Cube Talk 9X U65GT

[gdp77]

Here I attach EBRs for 6/8/10/12/14/16/18/20GB. These EBR's are made for 32GB models. I will post soon EBRs for 16GB models.


Instructions:

First take full phone backup. ADB drivers for your phone must be installed. Then follow these instructions:

1. DO NOT CONNECT YOUR TABLET/phone TO PC!
2. Run as administrator SP Flash Tool (flash_tool).
3. Click scatter file and point the browser to the location of the scatter file. (You will find it inside the folder that mtk droid tools created when you backed up your phone/tablet)
4. A list of files will populate your screen with checkboxes all checked, uncheck everything, except the ones that say “EBR1” and “EBR2”.
5. The allocation size is defined by the EBR files that you will choose. So, click on the path of the EBR1 and EBR2 lines and select the custom ebr files you downloaded from #2
6. Use the “Download Only” setting in the dropdown menu in SP Flash Tool.
7. Click the Download button.
8. With the tablet/phone powered off, connect the USB.
9. Normally your tablet/phone should be recognised and a red progress bar should start filling. Once everything is completed you should see a confirmation dialog. Close the dialog and then the SP Flash Tool.
10. Disconnect the USB from your tablet.
11. Wait for a minute and power on the tablet. You should now have your new app storage.

When u turn on the tablet you may see a message saying that partition is destroyed or something like that. Don't worry, just select and format the new partition and everything will be ok.

If there is any problem, the procedure is completely reversable, as you can flash back original ebr files.

edit: Some devices require data/cache wipe and then restore defaults from recovery. Do this if after ebr flashing you cannot boot.

edit: 19/7/15 updated attachments

edit: 28/10/15 links from google drive, if local attachments dont work

EBRs for 16GB version
EBRs for 32 GB version

[gdp77]

EBR 4/6/8/10 for 16GB model

Here I attach EBR files for increasing app space (4/6/8/10GB) for 16GB Cube Talk 9X U65GT.

edit: 19/7/2015 updated attachments

[jesusjj]

Good morning, First, thanks for the post. The problem is I can't download the file , is there any alternate download link? Thank you very much

[Targix]

Yes. What the problem with this site. I can't download any file. I am trying for hours to find any ebr for my 16gb cube and all links is following to this don't working freaktab. Really great!

[Flash75]

Could u please reupp these EBR files for 16 GB :-)

[marcing00]

Please see the one I downloaded

[Flash75]

Thanks

[TexBud]

I followed the above instuctions to a "T". I did a total data/cashe and a factory reset. Double check installed current drivers. I still do not get the red bar on SPflashTool. It can not even find my tab/phone. The tab/phone in about 1 min shows battery charging.
When the tab power is turned on.
I get 2 windows on tablet. 1) Android USB mass storage. This window allows to connect or disconnect tab to PC. 2) USB computer connection. This window there is 5 choices; 1) USB storage 2) Media device(MTP) 3) Camera (PTP) 4) Charge only 5) Built-in CD-ROM. How, if I can, disable any of these options.
Any help?
Thank you in advance,
TexBud

[TexBud]

Never mind I did IT!!! I had to uninstall drivers then reinstall correct drivers... You'll (I) found that in STICKY section. Thanks all
TexBud Happy

[marcing00]

OK.. I reached to the point where I have scatter file.... I made it from the backup of the device....
Now - I reached the point where I place EBR1 & EBR2 from the custom location but when I try to place it it is saying "Downloaded DA100%" and give an error message: "BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3168)...
Rebooted device and still no change... partition still have 2GB...
I tried with EBR 4GB as well as 6GB.
My model is 16GB

[sludge]

Hi could you re-upload the 32GB ebr files, I am having an issue with the link in the OP. Thanks Sir.

[Flash75]

OK.. I reached to the point where I have scatter file.... I made it from the backup of the device....
Now - I reached the point where I place EBR1 & EBR2 from the custom location but when I try to place it it is saying "Downloaded DA100%" and give an error message: "BROM ERROR: S_CHIP_TYPE_NOT_MATCH (3168)...
Rebooted device and still no change... partition still have 2GB...
I tried with EBR 4GB as well as 6GB.
My model is 16GB

Same Issue here... Any Idea?

[mowgli]

Same Issue here... Any Idea?

This happened to me too. I solved it by renaming the scatter file to 6592 instead of 8392 and also changed the same inside the scatter file itself.
I guess, the Flash Tool is not up-to-date with latest mtk soc.

[marcing00]

I changed the name of the scatter file from: MT6582_Android_scatter.txt to MT8392_Android_scatter.txt and inside the file I changed the PLATFORM name to MT8392..but this didn't help...

[marcing00]

OK. I did it. I just used Scatter file from the file U65GT_V1.8_20140704_900ss.zip which I downloaded from this topic: http://freaktab.com/forum/mtk-based-...of-4-july-2014
I'm attaching the scatter file I needed.