Overclock total FAIL!

[chunks]

Hi,

need pls help, because I OC my ug802 RK3066 A9 1,6 GHz + 4 GPU MALI with this kernel_1080_CPU1608_GPU500_RAM1332_OC from 2dark4u and now my ug won't start. How could I reset the settings (like pc bios battery?)?
Always when I try to start the monitor he's black say and "try to connect" then it lost connection and try to connect again and again.



Greets

[chunks]

push

push

[billgatos]

hi look for ug802 recovery

[chunks]

Thanks

Thx 4 info i'll try!

[chunks]

won't work

It won't work the display is still black and nothing happend. Is there any onboard reset button or something else?

[kanglinyao]

Overclock total FAIL!

You have to unbrick ug802 by shortening 8,9 pins on the flash rom. It is pretty much like you put a mk808 to mask flash mode. Then you can put the ug802 to recover mode again and flash other working kernels. Need pics? Let me know. Good luck!

[chunks]

would be nice

You have to unbrick ug802 by shortening 8,9 pins on the flash rom. It is pretty much like you put a mk808 to mask flash mode. Then you can put the ug802 to recover mode again and flash other working kernels. Need pics? Let me know. Good luck!

Hi,

pics and a easy instruction would be nice for me.

Thx a lot 4 helping!

[chunks]

you mean this 2 pins? I tried to shortening it with a screwdriver but nothing happend.

[kanglinyao]

Re: Overclock total FAIL!

no
I am talking about 8 and 9 pin on nanad.

Sent from my Nexus 7 using Tapatalk HD

[kanglinyao]

Re: Overclock total FAIL!

see red line


Sent from my Nexus 7 using Tapatalk HD

[chunks]

XIEXIE DOZE

Thx man it works, sry I'd watch a russian video before where he tried with this pings to shortening the board

great thx

[chunks]

Another question!

I have flashed the nand 2 times because it always stucking when i updaload 2dark4u and now it stucking again but this time i can't shortening it. Do u have a solution?


greets