i68 TV BOX 1000Mbps ethernet LAN Firmware Upgrade--16th October , 2015

[u669983]

Anyone tested the gigabit firmware?

Yes. Met one isse so far . When a movie ends , it force closes Kodi altogether !. Other than that no issue - All smooth

[AZW]

Could you release the fw version compliant to i68 with hardware 100Mbps ethernet LAN?

The software is still in development

[AZW]

Could you release the fw version compliant to i68 with hardware 100Mbps ethernet LAN?

Not compatible . 100Mbps ethernet LAN , the software is still in development

[Jumpy73]

Not compatible . 100Mbps ethernet LAN , the software is still in development

AZW thanks for you answer.
Have you any forecast about software release compliant to 100Mbps ethernet LAN?

[shivattaque]

Hi, i have i68 TV BOX 1000Mbps, i install the latest firmware and i have the problem with the gigabit cut and the pass-through no cut now but strange song (slowly song 98%).

[BewickPlace]

I have a i68 TV Box, 1000Mbps and successfully installed the latest firmware using the Rockchip tool. The biggest problem I had was finding the correct driver for Windows 8.1 to recognise the device in bootloader mode. This caused each attempt to flash to fail and the box to reboot. I didn't solve that, but used one of my Windows 7 systems which worked first time.

I note that on this version Power Off has been removed. On my original firmware on the box (201L), which came from GearBest, power off seemed to work and it's a feature I would like to see re-enabled. I haven't fully validated Digital Audio passthrough as I'm waiting on the next release of Archos Video Player.

It would be good to hear which apps are preferred for TV Box operation.

Cheers, BP.

[shivattaque]

I have a i68 TV Box, 1000Mbps and successfully installed the latest firmware using the Rockchip tool. The biggest problem I had was finding the correct driver for Windows 8.1 to recognise the device in bootloader mode. This caused each attempt to flash to fail and the box to reboot. I didn't solve that, but used one of my Windows 7 systems which worked first time.

I note that on this version Power Off has been removed. On my original firmware on the box (201L), which came from GearBest, power off seemed to work and it's a feature I would like to see re-enabled. I haven't fully validated Digital Audio passthrough as I'm waiting on the next release of Archos Video Player.

It would be good to hear which apps are preferred for TV Box operation.

Cheers, BP.

Hi, you try KODI 15.2 ou 15.3 (XBMC) for the passthrough?

[BewickPlace]

I have tried (SPDIF) passthrough today using the Archos Video app and MX-Player, both work (AC3) with occassional glithes on the latter. I'm afraid I haven't used Kodi and so am unsure of the setup to test appropriately.

[Jumpy73]

I tried to flash even this last custom relaese, but nothing... I tried fw rel 100L, 101L, 201L, 204L but no results with any version. My ethernet port doesn't work !!!

The first day I received my i68 I launched "System update" app, a new fw release were available, so I updated it. From that time on, the ethernet port stopped working.
On the package of TV box a 1000Mbps ethernet LAN is specified, but I don't know which version of fw was really installed on my i68. Regardless whether the i68 is genuine or a clone, I tryed to install fw for both 100Mbps and 1000Mbps, but in any case I didn't reach to any solution

I don't really know what to do at moment. Does someone of you give me a tip on how to proceed?

Does anybody of you have an original version of i68 fw (I purchased it on gearbest about in the middle of september). Perhaps in this way I could solve my problem

Tks

[shivattaque]

I tried to flash even this last custom relaese, but nothing... I tried fw rel 100L, 101L, 201L, 204L but no results with any version. My ethernet port doesn't work !!!

The first day I received my i68 I launched "System update" app, a new fw release were available, so I updated it. From that time on, the ethernet port stopped working.
On the package of TV box a 1000Mbps ethernet LAN is specified, but I don't know which version of fw was really installed on my i68. Regardless whether the i68 is genuine or a clone, I tryed to install fw for both 100Mbps and 1000Mbps, but in any case I didn't reach to any solution

I don't really know what to do at moment. Does someone of you give me a tip on how to proceed?

Does anybody of you have an original version of i68 fw (I purchased it on gearbest about in the middle of september). Perhaps in this way I could solve my problem

Tks

Hi Jumpy73,

Try to restart your router for your Ethernet, I had the same problem after having instaled new firmware.

[Jumpy73]

Hi Jumpy73,

Try to restart your router for your Ethernet, I had the same problem after having instaled new firmware.

I switched off the router and then I restarted it. In the mean time the i68 is switched off and has wiFi disabled and ethernet enabled. Then I switch i68 on. I go to the settings app/ethernet menu, but I still see all protocol info setted to 0.0.0.0 (I have done the some for both 101L and 204L fw release).

How can I discover which is the right ethernet support I have on my i68? Is there something to check on serial number or other can be useful to discover that info?

After that, a stock firmware release should solve it

[shivattaque]

Here are the closest August version of the stock firmware.
but you can be in the 100 and not Gigabith release and in this case you're not in the right place .
" http://www.mobilewiser.com/firmwares...L1100_0722.zip "

[Jumpy73]

Here are the closest August version of the stock firmware.
but you can be in the 100 and not Gigabith release and in this case you're not in the right place .
" http://www.mobilewiser.com/firmwares...L1100_0722.zip "

The fw you linked (100L) is for 100Mbps ethernet. I tryed it and it doesn't work. In order to know if I'm the right place or not I asked for knowing how to discover the hw ethernet of my i68 (not using fw release obviously)

[pithboss1972]

i68 TV BOX ,Download the latest firmware
current version:update_I68G_204L1202
Based version:update_I68G_201L1200
Update:
1.Preloaded "RK" a customized version kodi 15.2.
a.Hardware acceleration:Support H.264 4K @ 25fps, H.265 4K @ 60fps and other mainstream video formats mpeg4 the hardware acceleration.
b.HDMI transparent transmission:Support ac3 Dolby Digital, eac3 Dolby Digital Plus, DTS, DTS HD, TrueHD other audio format.Maximum support 7.1-channel Source Code unvarnished transmission
c.SPDIF optical fiber source output(transparent transmission),Support ac3 Dobly Digtal, DTS,Maximum support to 5.1 channels.
d.Supports HD 3D video output.The default output for Left/right 3D format , Playback setup can switch to 2D format , Up / Down 3D format and so on.

2.Ethernet MAC address:Wifi MAC address in above plus 1

3.Support YouTube 1080p video playback

4.Removed power off function

5.download link:
http://pan.baidu.com/s/1sjABblz Password: 2bk5

6.Google cloud disk to download addressF
https://drive.google.com/file/d/0B8R...ew?usp=sharing

Is this rooted?? and is it merged

[JoeySmyth]

Yes, it's Rooted