!NEW! MK808/MK808B/MINIX Hybryd FW V2.2.4 !NEW!(22.05.2013)

[djvdgalien]

Can you boot in cwm? pressing the reset button and maintain it while you power on the device.
If you can do that, flash again, and after flash wipe data&cache, and in advanced wipe dalvick cache. Then restart.

leolas

Leolas, can not boot into CWM, that is the problem.
Normal boot keeps hanging in hybryd boot screen after I tried to install it as rom via CWM.
Recovery boot (with paperclip): rockchipbatchtool does not see my rk30 device (W7 64 bit does), so can not install new firmware etc.
Recovery boot (with paperclip and usb-stick with CWMi installation file renamed to update.zip), dead Android image with red triangle.
Recovery boot without paperclip; dead Android image with red triangle.
I have made a backup in CWM external SD before I flashed to hybryd 2.2.4., maybe that could be of some help?
I'm out of options for now.....

[leolas]

Re: !NEW! MK808/MK808B/MINIX Hybryd FW V2.2.4 !NEW!(22.05.2013)

Leolas, can not boot into CWM, that is the problem.
Normal boot keeps hanging in hybryd boot screen after I tried to install it as rom via CWM.
Recovery boot (with paperclip): rockchipbatchtool does not see my rk30 device (W7 64 bit does), so can not install new firmware etc.
Recovery boot (with paperclip and usb-stick with CWMi installation file renamed to update.zip), dead Android image with red triangle.
Recovery boot without paperclip; dead Android image with red triangle.
I have made a backup in CWM external SD before I flashed to hybryd 2.2.4., maybe that could be of some help?
I'm out of options for now.....

Ok don't panic.

Try to follow this steps:
Download finless rom 1.7c for mk808 or 1.7 for mk808b and uncompress it.
Power off your stick.
Push the reset button and while it is pressed conect your pc to the otg usb port.
Wait until your pc make the dong(new hardware detected)
Run finless flash tool.
Tell me if the stick is detected, itmust say FOUND RKDEVICE IN LOADER MODE or so, wait in this screen and tell me. I will say you the next steps.


leolas

Edit: I will wait your answer.

[djvdgalien]

Ok don't panic.

Try to follow this steps:
Download finless rom 1.7c for mk808 or 1.7 for mk808b and uncompress it.
Power off your stick.
Push the reset button and while it is pressed conect your pc to the otg usb port.
Wait until your pc make the dong(new hardware detected)
Run finless flash tool.
Tell me if the stick is detected, itmust say FOUND RKDEVICE IN LOADER MODE or so, wait in this screen and tell me. I will say you the next steps.


leolas

Edit: I will wait your answer.

I have a minix x5.

[leolas]

Re: !NEW! MK808/MK808B/MINIX Hybryd FW V2.2.4 !NEW!(22.05.2013)

I have a minix x5.

Never mind. We will ise only the old rkdevelop tool.

leolas

[djvdgalien]

Leolas,

Started up my X5 with paperclip pressing recovery button and then power on button simultanuasly.
W7 machine found "RK30device". After that I started finless rom flash tool; message "No Found RKAndroid rock usb".
I guess that is not OK.

Other versions of the usbdriver state: "rkusbdevice"

I found this on the net; easy adb batch tool. Could this be of any help. My knowledge is to less.

http://www.andydarkroom.site90.com/index.html

update: an old xp pc did the rktool update, so mine is fine.

[benitomuso]

Lewy, regarding your post in the other thread, will you reléase an equivalent one for the NEO X5 (and RK3066 devices)?

whats to come in next week:

v1.2.0
-youtube for gtv downgraded to 1.6 (due to login problems on 1.7.1)
if you dont need to login 1.7.1 can be downloaded on my website
-better webcam support (logitech cams like c525 wasnt working befour, now it works like a charm)
-test external cd/dvd support
-bootsound suport (put any .mp3 into system media and rename it to android_audio.mp3 it will be played with at bootanimation screen.)
-auto install advancedsettings.xml for smooth 1080p videa playback in XBMC
-back to stock with apps icons

Is too difficult for you to prepare the two versions: 720p and 1080p framebuffer? It will really be very useful.

After your words I infer that you are adding the udf and iso9660 driver, right? Will they auto-mount devices or a manual call should be necessary? An auto-mounting as in Linux will really rock!!!

Have you identified the driver of the stock IR mouse of Minix? Could you add it to your Kernel? Because we are lacking the use of the remote and as far as I know it is just a matter of not having the proper driver.

Regards,
Pablo

[pdjm]

Today i got minix neo g4, it´s a revision C model, minix download site has a specific firmware download for this model, i don't know if they made any major hardware change. Can i use this rom?
Thanks

[Watts]

Does this work for the minix neo x5 mini as well?

Please check out my thread concerning this device:

http://www.freaktab.com/showthread.php?7713-Is-there-a-complete-n00b-guide-to-root-and-flash-the-MINIX-NEO-X5-MINI-Because-i-really-don%B4t-know-how-to-do-it-lol

Any help would be greatly appreciated....

[seth29]

CWM version

Hi
Can some one give me link to download the Rom zip file so to be flashed via CWM. Also is it based on 4.2.2FW or 4.1.1FW of minix.

thanks.

[stubuchy]

Minix neo g4 rev c

Hi, I tried to flash this great looking rom but the wifi will not turn on, is there anything I can do or change for this, any help would be very appreciated?

I think mine is the newer version, the model C... if that makes any sense?

Thanks