CSA90 16 GIG Custom formwares

[homeruk187]

Having flashed the usual way both wassers i68 and r68 firmwares everything up to now is working peachy including gig Ethernet and dual wifi. I'm still testing various kodis as all seem to have the global stutter. The one thing that does work which I knew wouldn't is the IR remote. I took a backup from my CSA90 before flashing wassers and I was just wondering if there is anything I could load from my old rom to get my IR support back.

Even though I have a wirless keyboard and mouse this could be the showstopper as my kids use the remote when they want to watch anything. Hats of to Wasser though!

[afgp87]

i hope someone help u i want to know how do this too

[homeruk187]

Ive been reading up on remote stuff and I think the settings are pretty much tied up within the Kernel.... I'm still looking but any help would be appreciated.

Cheers

[Diman3452]

Is there any reaction to the remote control buttons in this app? KeyTest.apk

[afgp87]

homeruk187 any luck ?

[homeruk187]

I got nothing from the remote using this app but as I said earlier the remote does work just not with the wasser roms.

[Diman3452]

You need to unpack Wasser's firmware and to take from there the parameter file.
Then you need to unpack CSA firmware and to take from there a kernel.img.
Using AndroidTool, flash a kernel to the section address according to the parameter.

P.S. AndroidTool can unpack firmwares, flash one-file firmware or separate images.

[homeruk187]

You need to unpack Wasser's firmware and to take from there the parameter file.
Then you need to unpack CSA firmware and to take from there a kernel.img.
Using AndroidTool, flash a kernel to the section address according to the parameter.

P.S. AndroidTool can unpack firmwares, flash one-file firmware or separate images.
http://freaktab.com/filedata/fetch?id=523592

Cheers Diman, from what I've been reading I thought Ide need to do something like that. but when I clicked the link you have attached I'm just getting a white page. I had already extracted the kernel.img from the CSA90 rom and I extracting the wasser rom now. Any pointer on what I should be looking for as part of the wassser extract would be great, I trust there will be something obvious pointing to the remote s

Laters and thanks for your help so far.

[homeruk187]

Heres the parameter file from the CSA which had a file ext of txt

FIRMWARE_VER: 5.1.0
MACHINE_MODEL:CSA9016G
MACHINE_ID: 007
MANUFACTURER: RK3368
MAGIC: 0x5041524B
ATAG: 0x00200800
MACHINE: 3368
CHECK_MASK: 0x80
PWR_HLD: 0,0,A,0,1
#KERNEL_IMG: 0x00280000
#FDT_NAME: rk-kernel.dtb
#RECOVER_KEY: 1,1,0,20,0
#in section; per section 512(0x200) bytes
CMDLINE: console=ttyS2 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0 x00002000@0x00004000(trust),0x00002000@0x00006000( misc),0x00008000@0x00008000(resource),0x00008000@0 x00010000(kernel),0x00010000@0x00018000(boot),0x00 010000@0x00028000(recovery),0x00038000@0x00038000( backup),0x00040000@0x00070000(cache),0x00002000@0x 000B0000(kpanic),0x00300000@0x000B2000(system),0x0 0008000@0x003B2000(metadata),0x00002000@0x003BA000 (baseparamer),0x00400000@0x003BC000(userdata),0x00 020000@0x007BC000(radical_update),-@0x007DC000(user)

And here's what I got from wassers which didn't have a file extn

FIRMWARE_VER: 5.1.1
MACHINE_MODEL: RK3368
MACHINE_ID: 007
MANUFACTURER: RK3368
MAGIC: 0x5041524B
ATAG: 0x00200800
MACHINE: 3368
CHECK_MASK: 0x80
PWR_HLD: 0,0,A,0,1
#KERNEL_IMG: 0x00280000
#FDT_NAME: rk-kernel.dtb
#RECOVER_KEY: 1,1,0,20,0
#in section; per section 512(0x200) bytes
CMDLINE: console=ttyS2 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0 x00002000@0x00004000(trust),0x00002000@0x00006000( misc),0x00008000@0x00008000(resource),0x00008000@0 x00010000(kernel),0x00010000@0x00018000(boot),0x00 010000@0x00028000(recovery),0x00038000@0x00038000( backup),0x00040000@0x00070000(cache),0x00002000@0x 000B0000(kpanic),0x00200000@0x000B2000(system),0x0 0008000@0x002B2000(metadata),0x00002000@0x002BA000 (baseparamer),0x00020000@0x002BC000(radical_update ),-@0x002DC000(userdata)

[Diman3452]

Find and open AndroidTool program on the first tab. In line a parameter specify a way to the parameter file from wasser's firmware.
Remove marks from all check boxes, leave only on a kernel. Specify a way to a kernel from CSA firmware. Run

[homeruk187]

Find and open AndroidTool program on the first tab. In line a parameter specify a way to the parameter file from wasser's firmware.
Remove marks from all check boxes, leave only on a kernel. Specify a way to a kernel from CSA firmware. Run

Cheers once again Diman,I tried that and ran the tool now the box has black screen and wont boot so its back to the drawing board. Thanks again for all your help

On the attached I keep everything in csa90 and the parameter file is the one from the wasser i68 and the kernel from csa90 but I reckon on wasser build theres too much difference in csa90 stock.

[afgp87]

I have the same problem I used a room but my remote no working please help