M8S - USB Burning Tool failing at 2%

[leafs87]

Blue light isn't coming on and the box doesn't want to power up. It connects to USB Burning Tool however fails at 2% with the following...any ideas?

[redliquid]

Hello,

You should try a different firmware file - I had the same problem as You have now. Can You upload PCB pictures of Your device?

Greetings.

[manero]

http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/eny-acemax-em8-square-em6q-etc-devices/21603-how-to-unbrick-your-m8-m8n-h8m?p=537454#post537454

[JonnyCage]

I have the same problem

[22:03:48 031][HUB5-3][Inf]--Device is connected
[22:03:48 031][HUB5-3][Inf]--Close device handle 0x00000250
[22:03:48 093][HUB5-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&21af9bf0&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000250
[22:03:53 156][HUB5-3][Inf]--0-7-0-16
[22:03:53 156][HUB5-3][Inf]--CheckFileRunState succeed
[22:03:53 156][HUB5-3][Inf]-- low_power
[22:03:53 156][HUB5-3][Inf]--Send command success
[22:03:53 156][HUB5-3][Inf]--Read command status success
[22:03:53 156][HUB5-3][Inf]-------------ERASE FLASH-----------
[22:03:53 156][HUB5-3][Inf]--disk_initial 2
[22:03:53 156][HUB5-3][Inf]--Send command success
[22:03:53 250][HUB5-3][Err]--failed:[22:03:53 250][HUB5-3][Err]--Check command return failed
[22:03:53 265][HUB5-3][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
[22:03:53 281][HUB5-3][Inf]--Close device handle 0x00000250

Any sugestions ?? Help ?

[JustMe]

try later version usb burntool and grab bew img file both file can be found here http://freaktab.com/forum/tv-player-...ial#post553667

[PHYSC]

Blue light isn't coming on and the box doesn't want to power up. It connects to USB Burning Tool however fails at 2% with the following...any ideas?

Do what I always do ask the seller if you can have the firmware or if they have it or can request it from the manufacturer preferably a .img firmware file rather than an sd update file type.This is what's normaly required after a soft brick with these amlogic s812 boxes.I am currently placing the firmware in an uploading site for the cyx it's a repair file set and the tool for flashing,the 1st is a .img but it requires a secondary piece which is an sd update in order to gain wifi functionality after loading the image.I do wonder when people are saying eg. flashed to 2% which happens to me with any other files wether they need the cyx files i have as they are a nightmare box,they can't cross-flash with stuff well at all or have eg.megatron firmware for m8s/m9 or m9 firmware on it's own,i had a n200 once that was amazing it could cross flash and everything with specific roms i wrote a thread on that.What disgusts me on freaktab for the 1st time is the lack of support for these boxes after the boxes becoming one of the fastest selling **** products i know of.They need multiple custom roms asap.Eny box firmware is good in all due respect but it could be customized into something better with the power of an m8s s812 like an arcade/media centre firmware or boot to arcade rom like coinops for xbox they have apps to force app open on boot surely that's a good idea to build for all models i know i would if i knew what to do.