Vensmile MXV S805 latest ROM

[cassioac]

https://mega.nz/#!ykdmjThBJust wanted to contribute to the community with the latest (1023 from October - 2015) ROM for Vensmile MXV (may work on other S805 similar model/brand as well).

1- Download and install this file on your PC:
https://mega.nz/#!65lzHBaR!v6KP3JKn3...jgBO72XkattvvQ <- Previous Version

EDIT: Newer version here:

https://mega.nz/#!ykdmjThB!2QBUaih-GSIJF5yIRgs6SmLmnkchSaAi4iTDkQPkZuw

2- Download and uncompress the ROM file:
https://mega.nz/#!TwtSkB7a!C4PMNTmyC...qo92jRKRUiywWM

3- Run the program

4- Connect the male/male USB cable like this one on USB port 4:
http://www.homewired.com.au/componen...c8d3a1f290.jpg

5- While pressing the reset button, connect the power chord and press the power button once

6- Release the reset button as soon as the USB Burning tool recognizes the device

7- Click "File", then import image and select the uncompressed aml_upgrade_package.img

8- Click stop after the image has been restored, and connect the device to the TV

9- On the device (using the remote) go to Other / System Update, there will be one more online update to the system (make sure that you have no sd card plugged in during the update).

10- Your system will now be upgraded with Build number KOT49H.20151119-1617, and probably now all future updates may be performed online.


Any questions please post comments below.

[MakinaCore1]

links are asking for decrypt key

[cassioac]

links are asking for decrypt key

Links updated, sorry for that

[MakinaCore1]

nah cant get the pc to find the tv box lol

[MakinaCore1]

[23:41:12 539][HUB5-2][Err]--[0x00301001]Erase bootloader/Switch status/Enum device/Enum error

[cassioac]

[23:41:12 539][HUB5-2][Err]--[0x00301001]Erase bootloader/Switch status/Enum device/Enum error

What's your box brand/model?

[cassioac]

Don't use USB hubs, connect the device directly to the PC.
Don't use virtualization (Parallels, VMware, etc virtual machines doesn't work, if using Mac use Boot Camp only).

[MakinaCore1]

MXQ OTT TV BOX ... think its model m201 ... on the board it says s805_mxq_v03

[cassioac]

Does the box appears on USB Flash Tool?

[MakinaCore1]

yes m8 drivers install ect to .. just keep getting that error ...

[cassioac]

yes m8 drivers install ect to .. just keep getting that error ...

I'm afraid this ROM isn't compatible with your device then.

Have you tried this build?

http://chinagadgetsreviews.com/download-android-kitkat-4-4-2-stock-firmware-for-tronfy-mxq-tv-box-2.html

[MakinaCore1]

no .. will i run it with the usb buring tool or with a sd card ?

[cassioac]

no .. will i run it with the usb buring tool or with a sd card ?

USB Burning Tool, try the one from this link:

https://mega.nz/#!wdVDUYAC!TNnxJpRgcy2jeUlPAjWVm2ixIADErC3AdDO9mJq6JbU

[MakinaCore1]

ok m8 its downloading just now

[MakinaCore1]

Mate your first method worked i had it pluged into the front of the pc changed to the back now the box is up and running !!
#legend thanks m8