[ROM] Unofficial OpenELEC for MXIII-G & Tronsmart MXIII+

[redcat]

HI there,

I hope that some one can help me.

I have an:
MXIII-C V1.1 S812/2G/16G/AP6330 (PCB 1.5mm)
Date: 2016.07.14

The software was always craching and now I can only see the red light.

I try to use the following firmware:
MXIII-C_202L1 for USB Burning Tool

I try this firmware with the following USB burning tools
AMLOGIC_TOOL_setup_v2.0.5.15_build9
USB_Burning_Tool_v2.0.6.2_build2
USB_Burning_Tool_v2.0.7_x86

When I try these USB burning tools I always get an error message like this: [0x10205004]Romcode/Lead UBOOT/Check decompress/Error result



MXIII-C_202L1 SD for sd card
I try this firmware on SD card but nothing hapen. I used the toothpick to hold down the button inside the AV port,


The above firmware i get it from here:
https://translate.google.com/transla...9136&sandbox=1


Nothing seems to work any ideas?

Any help would be aprecited.

[Kezz]

Wilro_6276....you seem to know your way around these boxes....Perhaps you can help me?
I just got a new MX3 but when I opened it up inside I found This MX3 V4.0 20151128....so far I have not been able to find the Image file for it.I did get Openelec 6.9.5.1 (AMLINUX) installed however it has NO WIFI or LAN. It is the only one that it readily Accepts and to reflash I can get M8Splus to go but only to the M8S+ logo.
Is there a fix??? Thank You for any assistance you can give!

[baalho]

wonder whats going on with Wilro, hope all is well.
Have not seen activity form him in long time.

[biossman74]

I'm running LibreELEC-MX3G.arm-7.0.1.4.zip on a MXIII-G with 2gb ram and I having some buffering issues on larger files (5gb and up) from my NFS shares over WIFI.

Would manually mounting my NFS source help to fix that like mentionned here http://forum.kodi.tv/showthread.php?...855#pid1953855 ?

And if so, how would a simpleton like me go about doing that on LibreELEC ?

[hscotty55]

LibreELEC-MX3G.arm-7.0.1c works perfect. Thanks for your work!!!

[kenmills]

Maybe this helps, I've described how to get OpenELEC working on MXIII-G 2GB/16GB boxes with these boards here:

Awesome thx!

[Bruur]

Maybe this helps, I've described how to get OpenELEC working on MXIII-G 2GB/16GB boxes with these boards here:

[kenmills]

Good day to you all,
I just got a new MX3-Plus box with netxeon MXIII-C_V1.2 on the board. Has anyone got an optimal/updated LibreELEC build for this box yet? I'd be happy to test a build.
Cheers,
Ken

[gthebest]

Hello. I cant install some add-on updates. When I try to update is says : "Dependencies not meet. Please contact add-on author" Can anyone help me?

[mazsuper]

you can try the way i installed oe from my previous post which worked for me with one of these newer devices etc

[dan3ll]

hi,

i tried flashing your file (openelec 6.0.3,openelec 6.95.2,librelec 7.0.1)
but no luck
i used zip file,and flash via toothpicking
after i select file zip(on update ext)
its always said

e:footer is wrong
e:signature verification failed
installation aborted

can anyone help?
whats wrong in my step?
or do i must factory reset first than flashing?
thanks before

[alon24]

Hi,

I realy like this device, and whats been done with it is amazing. this being said, is this still being developed?
Is OE still in the works for this machine?


Thanks,
alon24

[Fed10]

Hello.
I wanted to install Openelec 6.0.3e with toothpick install, but after a Wipe and Factory Reset, I got an install error with each file I've downloaded.
I've tried to install Openelec through SD card and it works ... is there a way to fix the problem?

I've Mx3-G 2Gb and I'm usign TWRP 2.5.0.0 K200 ... thank you!

[Darkzide]

if i want bluetooth on my MX3G box do i have to go back to android system again i love OpenELEC on my box but i also have a game controller that i like to use again i wanna install RetroArch into my Kodi/OpenELEC
i would love to play the old shcool games on my big tv

So sorry i have read now that bluetooth are working in the 6.something anyways i have installed the newest test one and will test it out hope to get gaming soon but if anyone also had trouble with their bluetooth and got it fixed please reply here what you did

CyberViking out........

[Doggyofone]

I have installed extfsd to be able to explore the sd card in Windows. However, I don't see the "update" folder. All I see is aml_autoscript, kernel.img, kernel.img.md5, system and system.md5. I can't explore any of them to find sub folders. How/where do I find the "update" folder?

Figured this one out. Found this page:Updating OpenELEC - OpenELEC and read it. Pretty simple process. Open Windows Computer (my computer...) type in the address for your box as shown under System - system info - Summary. The folders for OpenELEC should show in Explorer (in Windows 10 this is the Network folder) and update is one of them. From there it is a simple process to copy the update file on your PC to the update folder. Reboot and the update should run.