OTT M8 S802 V2 Bricked [Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error

[realexit23]

Hey Guys im New here.
I got an M8 Box form Ott. I got it "Bricked" from a frend.
The problem is i got no image over HDMI also not over A/V.
If i plug the power or OTG USB the box turnd ON (blue light turns on)
and i can change the color in to red.

(i try that all after the How to´s)
So i try to unbricked via the BurnCard no success.
Than i try the USB Burning Tool.
I got success connect but after 2% i got this error.
[Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
So i try diffrent PC´s with diffrent Windows on it diffrent USB Cabel´s and diffrent USB Ports.
Everytime the same error.

so can somebody help me please?

[neomode]

Hello,

Try the Rom for the Probox2 EX the Firmware you find here --> http://probox2.com/?wpdmdl=970
Download the Flash Tool here --> http://probox2.com/wp-content/upload...grade-tool.zip
Also Download Mobrobo and install it for the Driver --> http://download.moborobo.com/downloa..._official).exe

When you do all this then try again to Flash the Box.

Regards
Neomode

[realexit23]

Hey i install Moborobo and deinstall the driver that comes with the burning tool.
Now it founds no driver for the box.
do you have a solution for that?

[neomode]

Then Install the Driver from Flash Tool, after this it should Work for you.

Neomode

[realexit23]

still no success