Mxq Pro Plus Rom issues

[fantastick]

My NAS is able to push files with 60-100 mBytes/s, I think its not a bottleneck.
After some 4K test video was bumpy with lots of buffering halts, I pushed up the network buffer size to 200 mByte, Kodi play the videos fewer pauses, but still exist some in an 1-2 minute video. So the cpu can play 4K x265 videos smoothly, but the network handling is very bad.
P.S.: Pulse H5007NL the lan chip on the board, it is a gigabit kind, but i am its set to 100 mbit by OS.

Not uncommon for the internal (repeat: internal) storage memory to be slow. Look at sample table from CNX with preamble of:
"However since with Gigabit Ethernet, this test is also impacted by the internal storage read and write speeds..."

[gedorin]

my mx pro+ 4k is not being detected by burning tool. any way around this?

[fantastick]

my mx pro+ 4k is not being detected by burning tool. any way around this?

Presumably a driver issue. What version burning tool did you install? I had similar issues on a 64bit w10 system until I installed v2.0.7 of tool and copied the mac_ether.ini file to appropriate folder.

[gedorin]

win 10, 64bit, burning tool 2.0.7, created license folder and copied mac_ether.ini to it. mac shows in the right box on the burning tool screen. any other drivers i could try?

[Teddybee]

win 10, 64bit, burning tool 2.0.7, created license folder and copied mac_ether.ini to it. mac shows in the right box on the burning tool screen. any other drivers i could try?

Unplug the player from electricity and usb, start burning tool, open the img, click to Start button and AFTER plug the usb cable to USB4 and your PC. After that the burning tool will recognise your device and upload the fw. (do not touch anything until you see the success message on your monitor)

[gedorin]

tried that. burning tool still doesn't recognize it. i left it on for about 10 minutes but nothing happened..

[fantastick]

tried that. burning tool still doesn't recognize it. i left it on for about 10 minutes but nothing happened..

1) During burning tool installation, did you have to manually agree to load "worldcup" driver or similar?
2) Is your USB A-A flash cable plugged into a USB2 socket on client PC?

[gedorin]

yes to both

[nephinj]

Open the box and on the right side of the samsung chip hit the pins going up (around pin 8) with a screw driver until it connects. This works for me but I still can't get it past 4%.
Update: after loading the license files here it worked https://www.dropbox.com/sh/hj0p40wvg...cense.zip?dl=0

[gedorin]

could you be a little more specific? when do you short the pins? before plugging in or after? should the flashing be already started? what are the exact pins? i tried a lot of pins on the right side of the chip but no luck.. do you short only 2 at once or more?

[gedorin]

xx

[Shimon]

Not sure if another ROM update was planned for this device, but someone please have a look at this:
MXQ_pro+su_opcb_20160704.img

[youbee]

My Android box MXQ Pro 5.1.1 , Kemel version 2.14.29 has original Build 201602261919. From the forum info and after upgrading with this mxqpro_gongban_20160628_aml_upgrade_package, front panel light does not on and volume button does not work…
Please help me how to bring back blue light on the front panel and volume button to work again. I really need your help..
Also someone please give me correct firmware of my box.
Friends waiting your response asap
thanks

[Shimon]

Is your box an MXQ PRO+? (note the plus sign) If not you should probably find the right thread.

[morenol]

I think I have the wrong version of firmware and will not turn more. the blue LED lights but do not see anything on the monitor. I tried to install it with the USB cable in 4 windows but does not see it you can suggest me some information.