Firmware Upgrade Guide for Rockchip devices

[deetucks]

So then we need the Firmware for the 2GB device.
Right now don't know where to find.
Must take a look around

Neomode

ok thank you

[deetucks]

https://chinagadgetsreviews.com/download-android-7-1-2-stock-firmware-for-x96-mini-tv-box.html

i tried this but it reach 98% and give an error ..[0x30401002]UBOOT/partition/bootloader./identity/USB control setup

[gefattern]

https://chinagadgetsreviews.com/down...ni-tv-box.html
i tried this but it reach 98% and give an error ..[0x30401002]UBOOT/partition/bootloader./identity/USB control setup

Hi ,

what about the Rom of Nayam Amarshe for S905W SoC ??? shall it work , you can ask there ,

to find under "TodaysPosts"

good luck / gefattern

[deetucks]

i found one that works already and i even found the original firmware after.. thank you for your help..

[sector60]

Hi guys from Italy.
I've a MXQ Pro 4K (pic 1) bricked, blocked on MXQ logo.
It seems a Rockchip device (as you can seen in the pic).
I tried to unbrick with the SD method: failed (pic 3).
Anyone can help me? What is wrong?
Thx in advance
Sec

[gefattern]

Hi guys from Italy.
I've a MXQ Pro 4K (pic 1) bricked, blocked on MXQ logo.
It seems a Rockchip device (as you can seen in the pic).
I tried to unbrick with the SD method: failed (pic 3).
Anyone can help me? What is wrong?
Thx in advance
Sec

Hi ,

use the PC Way , works much better , if you need more Info ask ,

greetings / gefattern

[deetucks]

I'm still needing assistance with the stock firmware for the a95x box can't seem to find anything to run on it.. Everything I try is with error.. Box only boot to the xperience logo nothing more.. SD card won't work it pick up ok with pc..

[sector60]

Hi ,

use the PC Way , works much better , if you need more Info ask ,

greetings / gefattern

Thx pal!
Which way is better, Rockchip batch or Android tool?
Listen it's not so easy identify the box w/this methods

[gefattern]

Thx pal!
Which way is better, Rockchip batch or Android tool?
Listen it's not so easy identify the box w/this methods

Hi ,

for a Newbie the Batchtool is the little bit easier Way , because this Tool has only

one Tab , but the Way is on both the same , loading .img to Tool , prepare Box for

flashing and go , AT has additionally , part flashing , and some Test things , so for

you , BT is good , you can try AT too if you want , with AT you can make a full copy

of the installed Rom , ask if you need more help , greetings / gefattern

[sector60]

No way. Both programs don't recognize Tv Box.
Have you more suggestions?

[scooter2014]

Make sure you install drivers for device the last rockchip driver on site and also make sure you holding put into boot mode by pressing the reset switch and powering on make sure its held until boots in to recover. Then box will be seen in program.

[gefattern]

No way. Both programs don't recognize Tv Box.
Have you more suggestions?

Hi ,

please search on big G for the same Header as this Thread has , and you will find the Ugoos Site

with flashing Guide , good luck / gefattern