New MK802IV "Mini Maglite" Casemod

[blinkone]

I think i have found a way to Turn this units on and off with HDMI off the TV or Screen.
Make a Draiwing of it may someone want to Test is ?

Neomode

My mk809ii will turn on just by selecting the hdmi its conected to but my new cx 919 will not i have to get off my backside & unplug and replug

[BrunoNRG]

My mk809ii will turn on just by selecting the hdmi its conected to but my new cx 919 will not i have to get off my backside & unplug and replug

That's the same with the mk802iv.


@sam321

After reflashing Neo's custom firmware and the kernel it comes with, antutu runs fine (although scores are very low compared to extreme overclocked kernels), no matter if I use the switch / setcpu or not, runs with no problems. Flashing extreme 1.9ghz ram 1500mhz extreme overclocked kernel now.

[geonahta]

Try using a heatsink.
Or maybe the oc is too high for the cpu\ram.

You might also want to try a better power source. What are you using now?

[BrunoNRG]

You might also want to try a better power source. What are you using now?

I've tried 3 different power adapters (stock charger, an htc 5v 2amp and one from an old
router also 5v 2amp) surprisingly enough, the stock power supply seems to work the best

Edit: Just remembered I have a psp slim I'm not using, I'll try it's power supply on the mk802iv, since it's also 5v 2amp

Edit 2: Even with the psp slim power supply, the problem remains...

After so much I've already tested, I'm starting to think that either there's a problem with the cpu, or the only problem is really antutu because system is very stable running everything but antutu, but than again I only notticed this a day or two ago...

Edit 3: Solved it... I can't set both min and max frequency on SetCpu to 1920, by doing so system becomes unstable (it didn't before, but it does now), if I set max. frequency to 1920 and min. to 1872 all goes well, and scores almost 19200, just tested

[neomode]

Forget antutu, I have noticed often that it doesn't work well on Custom Kernel.
Take Epic Citadel that´s enough for a Stability Test.

Neomode

[BrunoNRG]

Forget antutu, I have noticed often that it doesn't work well on Custom Kernel.
Take Epic Citadel that´s enough for a Stability Test.

Neomode

Thanks Neomode, I was going to, but it gets in my nerves that it worked well before with the same configuration + rom + kernel and now it won't... But I think I just figured what the problem was

[sam321]

I thought I would show everybody my case too, all the conections are soldered and checked using a Multimeter and it all runs on a 3A power supply

[BrunoNRG]

Looks great Sam!!! What power supply are you using? Is that a WD 3.5" external hdd case?

[sam321]

yes it is a WD HDD case the power supply is from maplin.co.uk

[yerzu]

yes it is a WD HDD case the power supply is from maplin.co.uk

maplin is your sponsor? How many ampers and which manufacturer? I have stock 2A adapter and adapter from nexus7 2A too but I don't achive 19k in antutu... I was ordered 4A adapter maybe this helps... saddly is that nobody answer me in other thread about this.

P.S. Any ROM is unstable - mxplayer does not work correctly (suddenly exit streaming 720p 1080p) even on NEO ROM.. I achieved only cursor style changed... this it plus but other things are the same. Prime to neomode: if You do something do it wright or don't do anything.

[sam321]

maplin is your sponsor? How many ampers and which manufacturer? I have stock 2A adapter and adapter from nexus7 2A too but I don't achive 19k in antutu... I was ordered 4A adapter maybe this helps... saddly is that nobody answer me in other thread about this.

P.S. Any ROM is unstable - mxplayer does not work correctly (suddenly exit streaming 720p 1080p) even on NEO ROM.. I achieved only cursor style changed... this it plus but other things are the same. Prime to neomode: if You do something do it wright or don't do anything.

nobody is sponcering me, I have recieved no money or any android sticks. All the work that I have done has been for the comunity. As for your problem, I will answer you in the other thread

[neomode]

AW: New MK802IV "Mini Maglite" Casemod

Yerzu you say my Rom is not Stable.
I can only say to you I tested my ROMs before release. They Worked.
The most Time when something happens like this it is Power Supply.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[yerzu]

Yerzu you say my Rom is not Stable.
I can only say to you I tested my ROMs before release. They Worked.
The most Time when something happens like this it is Power Supply.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Thanks for reply! Maybe I was too rude - sorry. This is answer which confirms my suspections , can You write which AC-DC adapter You use (how many ampers and manufacturer/model)? Thanks.

[neomode]

AW: New MK802IV "Mini Maglite" Casemod

Yes I can the problem with this power supply they say 5V and 2A but when you need 2A the Power brake down.
Look for a Nexus 7 Charger or the Amazon Kindel Charge.

Gesendet von meinem GT-I9305 mit Tapatalk 2