[ROM] Sunvell T95Z PLUS / T95K PRO / T95U PRO - 2Gb/16Gb - SCV1 Final ROM

[Ico747]

@superceleron Tank you for exelent ROM!
Do you intend to include support for LTM8830 wifi chipset? Or even make a new rom based on Nougat?

[nba1341]

Rom worked great using tutorialbs instructions. Thanks

[yudi.15]

I rebuilt this ROM for the LTM8830 wifi chipset. If anyone is interested in this, let me know.

I need this rom with this chipset...Please provide me the link

[yudi.15]

hi there .. I am a newbie here... I flashed this firmware and everything was superb except my wifi wasn't present.. Kindly please 9377 (LTM8830) wifi chip module or guide me how can I add it via amlogic customization tool?? I would be grateful to you superceleron

[vkostas]

Successfully installed FW to my T95U Pro (led works better now). Thank you guys!!!!
However I didn't see too much improvement in the kodi music.
48kHz music plays BitPerfect: tested some DTSWav 48kHz encoded files with volume set to 100% and AVR receiver plays DTS (white noise is heard when audio signal is altered anyhow).
But all non-48kHz music is always resampled to 48kHz no matter the settings. I have many 44.1kHz DTSWAV encoded files and white noise is still the only option.
Is this a limitation of Android, current box, (broken?) Firmware? it's hard to believe we're in 2017 and passthrough works for a single frequency only (48kHz)!!!
Maybe it is a matter of config?
Can somebody clarify, PLEASE? Thanks again !!!

[Yemble]

Hi everyone!

Can you please tell me, if I can flash my T95U Pro using this IMG ROM from SD-Card (prepared with Burn Card Maker) instead of USB with USB Burning Tool?
Thank you in advance for your help and support.

Miguel

Why take that chance?

Stick to the method that is known to work, otherwise you may well end up in a world of pain. Just make sure that you have the correct (earlier) WiFi chip in your T95U Pro. Mine has been running great with this ROM since early Dec 2016.

The trick with the USB install method is to unplug every connection from the box, even the power plug, with the one exception of the USB port. This method works with both USB-2 and USB-3 ports on the connected PC or laptop.

[jit18]

Hi i have had wifi problems se #412. I have a KM63350209 chipset and sometimes it´s working with the Superceleron V1 Final ROM. Thank you. You can see with the terminal emulator in /system/etc/wifi wich chipset the ROM supports. Since my box works very erratic i found a new solution. I saw in /system/lib/ modules that supported other wifi dongles. I had a TP-LINK TL-WN725N and i loaded the driver with this command using the terminal emulator:
su
cd /system/lib
insmod 8188eu.ko
if you have to remove the module then use "rmmod 8188eu.ko"
It works for me. And yes it´s only 2.4 ghz, but its wifi... and i get around 60mbit.
There are more drivers...

superceleron, thanks for a good ROM.

brgds snappe

Try a lower channel on the router for the 5Ghz WiFi...
It should work..

[snappe]

Hi i have had wifi problems se #412. I have a KM63350209 chipset and sometimes it´s working with the Superceleron V1 Final ROM. Thank you. You can see with the terminal emulator in /system/etc/wifi wich chipset the ROM supports. Since my box works very erratic i found a new solution. I saw in /system/lib/ modules that supported other wifi dongles. I had a TP-LINK TL-WN725N and i loaded the driver with this command using the terminal emulator:
su
cd /system/lib
insmod 8188eu.ko
if you have to remove the module then use "rmmod 8188eu.ko"
It works for me. And yes it´s only 2.4 ghz, but its wifi... and i get around 60mbit.
There are more drivers...

superceleron, thanks for a good ROM.

brgds snappe

[Miguel Rodrigues]

Hi there guys and girls, two more rom's for you all!
Many thks to gearbest for sending me the device to play
This is two roms, one only for the T95Z and another to the T95K/U.
If anyone wants a RGB FIX rom it will be universal for all BUT you will lose the hour display, the led control and the default launcher of this boxes!
Many Thks to my beta tester trebor

Changelog Final V1:

• NOT Based on the Stock, only the kernel is from the stock!
• Netflix, youtube playstore...etc... fully working
• Fixed Navigation Bar and added power button and quick switch have the X to close all open apps on it!
• Xbox360 wireless Gamepad, original and Chinese clones?!(well it works with my clone adapter...)
• CPU/GPU temperature should be a lot better now! (din't test this one on the K and U...)
• Proper rooted.
• FTMC 16.1 Build 19
• initd.d support.
• Fully deodexed.
• Network tweaks. (On N networks bw around 30 to 44mbits, and on AC networks from 200 to 230mbits on cable well... from 500mbits to 948mbits) i have a 1Gb/100mbit connection!
• Permissions fixed.
• Sleep working, full poweroff also working etc..
• Kodi Brightness fix (videos...)
• Brightness fix for the system, if you guys want more or less brightness simple go to "/system/etc/init.d" and edit the file "1brfix" and change the value in here (echo "10") save and on the next boot you have the value you put it. A small bug, the 1º time the box boots after flash, its not working it only start working after 1º reboot/shutdown.
• Removed background logging.
• CEC disabled by default.
• Fixed auto frame switch in kodi. It only works on FTMC(included) SPMC 16.5.5, on kodi 16.1 doesn't work because is to old(misses a lot of fixes for the new S9xx devices)!
• Gapps Updated!
• Added Xposed Framework
• Other small fixes and optimizations!

Download:

• DOWNLOAD HERE FINAL V1 FOR T95Z PLUS
• MD5: E1564F74F5550E9CA79FCF05B98A1BD5
• DOWNLOAD HERE FINAL V1 FOR T95K/U PRO
• MD5: 4A8B15CEE383D24FDDB74F40B186F553

Install instructions:

• Use usb burning tool....

Hi everyone!

Can you please tell me, if I can flash my T95U Pro using this IMG ROM from SD-Card (prepared with Burn Card Maker) instead of USB with USB Burning Tool?
Thank you in advance for your help and support.

Miguel

[Glenlivet]

All, I am new and having so many issues... I have the same unit as martyc, a T95z Plus 3Gb 32GB with the 9377 chipset. For some reason the unit is bricked and unable to flash. I have tried using the USB burning tool but fails at 4% with the following error [0x10303004]Romcode/Switch status/Identify/Error result. I have tried everything... SD, no luck, different versions of USB burning tool, no luck. Any help would be greatly appreciated!!!!

[martyc]

I bricked my T95z plus box and after about 2 weeks of reading and trying this and trying that I was able to UNbrick it using the Amlogic_SD Card Maker software and the T95zplus_q200_9377_customv3.2.img file.

[007]

does this work with T95Z Plus S912 with 9377 wifi?

[kwuw4sale]

android 7 superceleron release updated ?

The guy has repeatedly said to expect no updates as he no longer has a box to build/test with.

[Mahounis]

android 7 superceleron release updated ?

[jit18]

I just tested the CPU Temperature of my Sunvell T95U Pro with the replaced cooler.


I wonder how your results are?



I used this Programm

https://play.google.com/store/apps/details?id=xyz.bluephoenix.stresscpu&hl=de

and tested for an Hour...

Here is the Result: