Tanix TX2 firmware needed

[janosik99]

Helo, I'm looking for any firmware for my Tanix TX2 tv box. It's based on Rockchip RK3229. Android show only product.model=rk322x
On PCB i found this description CS_3229MX9_V1.0 2016-03-26

[meconfusedthinker]

U can visit here to downolad firmware for TX2 R2 (2gb/16gb).

http://www.top10tvboxes.com/tx2-r2-tv-box-firmware-rk3229-2gb-16gb/

All the best.

[janosik99]

Thanks, but this is firmware for new R2 version with 2gb/16gb i have old version of this box with 1gb/8gb. Can i flash my box with this firmware?

[meconfusedthinker]

In that case u can write mail to them @ [email protected] , asking for TX2 (1gb/8gb) model firmware...they wiill upload on their site...i did the same..

[bluesmanuk]

I don't know which version this one is for but worth a look.

http://www.tanix-box.com/downloads/

It looks like the 1/8 box as that is what is shown in the product catalogue.

You can also request more info here.

http://www.tanix-box.com/contact/

[janosik99]

Thanks, but this download not working.

[bluesmanuk]

Make a request using the contact form then.

If they give you a working link then pop back here and post it as I/m sure that it will be of help to many.

[Javimetal]

I don't know which version this one is for but worth a look.

http://www.tanix-box.com/downloads/

It looks like the 1/8 box as that is what is shown in the product catalogue.

You can also request more info here.

http://www.tanix-box.com/contact/

- Tanix TX2 Firmware 1GB/16GB 2GB/16GB 20170608 Full Image

I think latest versions for every TX model will be there soon

[bluesmanuk]

There seems to be an issue with the link from the site icon.

This is a more direct one.

https://mega.nz/#!qQNARaJL!M2ztvuyRdw_WeWU1Jt2k4pmWw5AvefLzBZdVhig fud4

[Kodimailbox2017]

That Tanix tx2 firmware is for both the 1GB and 2GB versions according to the download page. I just ordered one today and now I hear from a review that it only plays up to 720p even when being set to 1080p. I really hope that reviewer just got confused due to youtube being limited to 720p on Android devices. Hopefully that doesn't apply to my 1080p kodi content.

[bluesmanuk]

That Tanix tx2 firmware is for both the 1GB and 2GB versions according to the download page. I just ordered one today and now I hear from a review that it only plays up to 720p even when being set to 1080p. I really hope that reviewer just got confused due to youtube being limited to 720p on Android devices. Hopefully that doesn't apply to my 1080p kodi content.

It's a 4k box, so output will be just that.

The review may have been referring to Youtube or even the GUI interface.

[Kodimailbox2017]

Just received this box myself and I seem to have the previously mentioned reviewers problem in reverse. I have the box set to 1080 @60hz and my TV reports as such but when I view system info in both Kodi/SPMC it shows 720p @240hz. Would anyone know a way to fix this? After I successfully unlocked 1080p in its YT app, this box seems to have a lot of potential at its price point if it can get past this deal breaking Kodi issue.

[canadawest]

Is there a firmware tool for the TX2-R2? I've tried to boot from SD Card but that doesn't seem to work with the box

I've also tried the USB_Burning_Tool with no success (works perfectly for loading T95Z Plus boxes)

Any instructions or links to relevant guides for updating/loading firmware to TX2-R2 would be very much appreciated!

[bluesmanuk]

When you say that you have tried booting from an SD card, did you use the burn card maker to make the card?

What issues/errors are you getting with the burning tool?

When using the tool/card are you booting the box into the right mode (usually by pressing in the reset button for a second or two whilst you apply power to the box)?

[canadawest]

When you say that you have tried booting from an SD card, did you use the burn card maker to make the card?

What issues/errors are you getting with the burning tool?

When using the tool/card are you booting the box into the right mode (usually by pressing in the reset button for a second or two whilst you apply power to the box)?

I wrote a few basic instructions on using the SD card method here.

http://freaktab.com/forum/tv-player-support/beelink-aa/beelink-android-tv-box/gt1/firmware-roms-tools-cg/611261-rom-beelink-gt1-alfawise-s92-scv10?p=627126#post627126

Yes, I used the burn card maker, still couldn't get the boxes to boot from SD Card and start the firmware load process.

I was able to find the Rockchip Batch Tool v1.8 and successfully get the firmware loaded via USB cable. (which I also found much more reliable with the Amlogic boxes as well using the USB_Burning_Tool)

I do appreciate the quick response, will definitely review your SD Card instructions to see if I've missed something (pretty sure I've been doing it right, but you never know LOL)